赵如龙,孙勇,段永华,鲁俐,殷国祥

• 1:昆明理工大学云南省新材料制备制备与加工重点实验室

摘要(Abstract)：

以工业用铝合金和锡为原料,利用机械振动的方法,去除铝表面的氧化膜,采用固-液复合法,制备Al/Sn复合材料。并对其附着强度、电导率、结合界面进行了检测,研究表明,通过此方法制备出的Al/Sn复合材料界面结合良好,兼有铝的优良导电性能和锡的焊接性能,且制备工艺平稳、简单、易控制和调整,具有良好的工业运用前景。

关键词(KeyWords)： 复合材料;机械振动;界面;附着强度

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(50664005);; 云南省自然科学基金(2004E0004Z;2006E0018Q);; 美国FEI(上海)公司合作项目

作者(Author): 赵如龙,孙勇,段永华,鲁俐,殷国祥

参考文献(References)：

• [1]Lesure D R,Syn C K,Sherby O D,et al.Mechanical behaviour of laminated metal composites[J].International Materials Reviews,1996,41(5):169-197.
• [2]王海龙.ZrB2基层状复合材料的制备与性能研究[J].稀有金属材料与工程,2007,36(1):841-843.WANG Hai-long.Preparation and mechanical properties of ZrB2-based laminated composites[J].Rare Metal Materials and Engineering,2007,36(1):841-843.
• [3]Aezra A.Principles and Practice of explosive Metal Working[M].Beijing:National Defence Industry Press,1981.
• [4]Mike Barbetta.The search for the universal surface finish[J].Printed Circuit Design&Manufacture,2004,21(2):34-37.
• [5]Wernick S,Pinner R.The Surface Treatment and Finishing of Aluminum and Its Alloys[M].V2,Teddington:Robert Drapter Ltd,1972.
• [6]Lashmore D S.Immersion deposit pretreatment for electroplating on aluminum[J].Plating and Surface Finishing,1978,65(44):44-47.
• [7]侯利锋.铜基体超音速火焰喷涂碳化物涂层界面研究[J].材料热处理学报,2005,26(3)70-72.HOU Li-feng.Investigation of interface between copper and carbides coating deposited by HVOF spray process[J].Transa Mater Heat Treat,2005,26(3)70-72.
• [8]Skotheim T A.Handbook of Conducting Polymers[M].New York:Dekker,1986:489-499.
• [9]Schmeisser D,Bartl A,Dunsch L,et al.Electronic and magnetic properties of polypyrrole films depending on their one-dimensional and two-dimensionalmicrostructures[J].Synthetic Metals,1998,93(1):43-58.
• [10]夏原,彭丹阳.超声波热镀铝技术评述[J].材料热处理学报,2001,22(4):25-30.XIA Yuan,PENG Dan-yang.Reciew on new technique by utrasonic hot dip alnuminized coating[J].Trans Mater Heat Treat,2001,22(4):25-30.
• [11]Jhang K Y,Kim K C.Evaluation of material degradation using nonlinear acear acoustic effect[J].Ultrasonics,1999,37(1):39-44.
• [12]Li J,Momono T.Effect of ultrasonic output power on refining the crystal structures of ingot sand its experimental simulation[J].Journal of Materials Acienceand Technology,2005,21(2):47-52.
• [13]刘志恩.材料科学基础[M].西安:西北工业大学出版社,2003.
• [14]刘勇,刘平.接触线用微合金化Cu-Ag-Cr合金时效析出行为和电磨损机理探讨[J].材料热处理学报,2007,28(增刊):34-37.LIU Yong,LIU Ping.Discuss on aging characteristics and electical sliding wear resistance of trace alloyed Cu-Ag-Cr alloy contact wire[J].Trans Mater HeatTreat,2007,28(suppl):34-37.

文章评论(Comment)：