徐海林,董洪波,朱深亮,王志录,江斌

• 1:南昌航空大学航空制造工程学院
• 2:中航工业江西景航航空锻铸有限公司

摘要(Abstract)：

研究了双重退火以及变形工艺对TC21钛合金组织的影响。结果表明,TC21合金在准β区变形后,在两相区一次退火,随退火温度升高,显微组织中等轴α相增加,针状α相减少;随第二次退火温度升高,二次析出的α相形核率低,二次α相粗大。在同一应变速率下,在两相区随着变形温度升高,双重退火后等轴状初生α相减少,针状次生α相增多;当变形温度到达β相区时,退火后组织为网篮组织。

关键词(KeyWords)： TC21合金;高温变形;双重退火;组织

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(51164029);; 江西省自然科学基金项目(20114BAB206017)

作者(Author): 徐海林,董洪波,朱深亮,王志录,江斌

DOI: 10.13289/j.issn.1009-6264.2014.07.012

参考文献(References)：

• [1]赵永庆,曲恒磊,冯亮,等.高强高韧损伤容限型钛合金TC21研制[J].钛工业进展,2004,21(1):22-24.ZHAO Yong-qing,QU Heng-lei,FENG Liang,et al.Research on high strength,high toughness and high damage-tolerant titanium alloy-TC21[J].Titanium Industry Progress,2004,21(1):22-24.
• [2]王新南,朱知寿,童路,等.锻造工艺对TC4-DT和TC21损伤容限型钛合金疲劳裂纹扩展速率的影响[J].稀有金属快报,2008,27(7):12-16.WANG Xin-nan,ZHU Zhi-shou,TONG Lu,et al.The influence of forging processing on fatigue crack propagation rate of damage-tolerant titanium alloy[J].Rare Metals Letters,2008,27(7):12-16.
• [3]朱丽英,陈明和,陈伟.TC21钛合金的疲劳裂纹扩展研究[J].机械制造与自动化,2009,38(5):10-12.ZHU Li-ying,CHEN Ming-he,CHEN Wei.Research on fatigue crack growth of titanium alloy TC21[J].Machine Building&Automation,2009,38(5):10-12.
• [4]赵永庆.高温钛合金研究[J].钛工业进展,2001,18(1):33-39.ZHAO Yong-qing.Research on high-temperature titanium alloy[J].Titanium Industry Progress,2001,18(1):33-39.
• [5]唐光昕,朱张校.TC11合金在不同热处理条件下的显微组织分析[J].稀有金属,2002,26(2):146-148.TANG Guang-xin,ZHU Zhang-xiao.Microstructural analysis of TC11 alloy by different heat treatment[J].Chinese Journal of Rare Metals,2002,26(2):146-148.
• [6]曾卫东,周义刚.冷速对TC11钛合金β加工显微组织和力学性能的影响[J].金属学报,2002,38(12):1273-1276.ZENG Wei-dong,ZHOU Yi-gang.Influence of cooling rate on microstructure and mechanical properties of bata processed TC11 alloy[J].Acta Metallrugica Sinica,2002,38(12):1273-1276.
• [7]沙爱学,王庆如,李兴无.航空用高强度结构钛合金的研究及应用[J].稀有金属,2004,28(1):239-242.SHA Ai-xue,WANG Qing-ru,LI Xing-wu.Research and application of high-strength titanium alloys used in airplane structure[J].Chinese Journal of Rare Metals,2004,28(1):239-242.
• [8]王金友,葛志明,周彦邦.航空用钛合金[M].上海:上海科学技术出版社,1985.
• [9]陈伟.TC21钛合金损伤容限性能研究[D].南京:南京航空航天大学,2008.CHEN Wei.Research on the damage tolerance of TC21 titanium alloy[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2008.
• [10]邓瑞刚,杨冠军,毛小南,等.锻造工艺及后续热处理对TC11钛合金组织与性能的影响[J].机械工程材料,2011,35(11):58-61.DENG Rui-gang,YANG Guan-jun,MAO Xiao-nan,et al.Effects of forging process and following heat treatment on microstructure and mechanical properties of TC11 titanium alloy[J].Materials for Mechanical Engineering,2011,35(11):58-61.
• [11]王永.高温高强钛合金的热处理工艺及相变行为研究[D].沈阳:沈阳大学,2008.WANG Yong.The high treatment and phase transformation of a high temperature and high strength titanium alloy[D],Shenyang:Shenyang University,2008.
• [12]王晓燕,郭鸿镇,姚泽坤,等.双重退火对TC18钛合金等温锻件组织性能的影响[J].材料热处理学报,2009,30(1):100-103.WANG Xiao-yan,GUO Hong-zhen,YAO Ze-kun,et al.Effect of duplex annealing on microstructure and properties of TC18 titanium alloy isothermally forged[J].Transactions of Materials and Heat Treatment,2009,30(1):100-103.
• [13]朱知寿,王新南,顾伟,等.TC2 1钛合金高温热变形行为研究[J].中国材料进展,2009,28(2):51-55.ZHU Zhi-shou,WANG Xin-nan,GU Wei,et al.Study on high temperature deformation behaviors of new type TC21 titanium alloy[J].Materials China,2009,28(2):51-55.

文章评论(Comment)：