逯昊燃,张晗,米畅,李波,郭宇星,张树志,张俊松,张新宇,刘日平

• 1:燕山大学亚稳材料制备技术与科学国家重点实验室

摘要(Abstract)：

锆具有抗辐照、耐腐蚀、热膨胀系数小和密度低等优异性能。然而，纯锆的强度较低，限制了其在航空航天领域的广泛应用。本文从成分设计优化、组织性能之间的关系和强化机制等方面综述了团队近十几年在高强韧锆合金方面的研究进展，并阐述了所开发的新型高强韧锆合金在航空航天领域的应用。

关键词(KeyWords)： 锆合金;空间活动构件;组织结构;力学性能;强化机制

Abstract:

Keywords:

基金项目(Foundation): 中央引导地方科技发展资金项目(226Z1013G);; 河北省高等学校科学技术研究项目资助(KJZX202201);; 河北省在读研究生创新能力培养资助项目(CXZZBS2023058)

作者(Author): 逯昊燃,张晗,米畅,李波,郭宇星,张树志,张俊松,张新宇,刘日平

DOI: 10.13289/j.issn.1009-6264.2023-zt03

参考文献(References)：

• [1] 曹春晓，闫渊林，黄旭.我国航空系统钛合金发展现状与展望[J].钛工业进展，2002(4):26-29.CAO Chun-xiao,YAN Yuan-lin,HUANG Xu.Development status and prospect of titanium alloy in Chinese aviation system[J].Titanium Industry Progress,2002(4):26-29.
• [2] 唐见茂.航空航天材料发展现状及前景[J].航天器环境工程，2013,30(2):115-121.TANG Jian-mao.Current status and trends of advanced composites in aerospace[J].Spacecraft Environment Engineering,2013,30(2):115-121.
• [3] 冷力强，侯宇葵.未来空间技术发展展望[J].航天器工程，2007(1):44-49.LENG Li-qiang,HOU Yu-kui.Future development of space technology in China[J].Spacecraft Engineering,2007(1):44-49.
• [4] 马明臻，张新宇，谭春林，等.航天机构潜在故障模式与故障机理分析[J].燕山大学学报，2014,38(1):1-9.MA Ming-zhen,ZHANG Xin-yu,TAN Chun-lin,et al.Analysis of potential failure modes and failure mechanism of space agency[J].Journal of Yanshan University,2014,38(1):1-9.
• [5] Wayer J K,Castet J F,Saleh J H.Spacecraft attitude control subsystem:Reliability,multi-state analyses,and comparative failure behavior in LEO and GEO[J].Acta Astronautica,2013(85):83-92.
• [6] Bedini P D,Solomon S C,Finnegan E J,et al.MESSENGER at mercury:A mid-term report[J].Acta Astronautica,2012,81(1):369-379.
• [7] 薛玉雄，杨生胜，把得东.空间辐射环境诱发航天器故障或异常分析[J].真空与低温，2012,18(2):63-70.XUE Yu-xiong,YANG Sheng-sheng,BA De-dong.Analyze of spacecraft system failures and anomalies attributed to the natural space radiation environment[J].Vacuum and Cryogenics,2012,18(2):63-70.
• [8] 陈烈民，沃西源.航天器结构材料的应用和发展[J].航天返回与遥感，2007(1):58-61.CHEN Lie-min,WO Xi-yuan.The application and development of astronautic structural material[J].Spacecraft Recovery & Remote Sensing,2007(1):58-61.
• [9] 张森森，王世杰，李雄耀.月尘的性质及危害评述[J].地球科学，2013,38(2):339-350.ZHANG Sen-sen,WANG Shi-jie,LI Xiong-yao.Properties and harmfulness of lunar dust:A review[J].Earth Science,2013,38(2):339-350.
• [10] 王立，邢焰.航天器材料的空间应用及其保障技术[J].航天器环境工程，2010,27(1):35-40.WANG Li,XING Yan.Materials in space applications and the support technology[J].Spacecraft Environment Engineering,2010,27(1):35-40.
• [11] Liu C Y,Qu B,Ma Z Y.Recrystallization,precipitation,and resultant mechanical properties of rolled Al-Zn alloy after aging[J].Materials Science and Engineering A,2016,657:284-290.
• [12] Xu W,Brandt M,Sun S.Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition[J].Acta Materialia,2015,85:74-84.
• [13] Wang X H,Inoue A,Kong F L.Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys[J].Acta Materialia,2016,116:370-381.
• [14] Baykov V I,Perez R J,Korzhavyi P A.Structural stability of intermetallic phases in the Zr-Sn system[J].Scripta Materialia,2006,55(5):485-488.
• [15] Bolat G,Izquierdo J,Santana J J.Electrochemical characterization of ZrTi alloys for biomedical applications[J].Electrochimica Acta,2013,88:447-456.
• [16] 周云凯.Zr-Ti二元合金的强韧化及其组织演变[D].秦皇岛：燕山大学，2015.ZHOU Yun-kai.Strengthening and microstructure evolution of Zr-Ti binary alloy[D].Qinhuangdao:Yanshan University,2015.
• [17] Jiang X J,Jing R,Liu C Y.Structure and mechanical properties of TiZr binary alloy after Al addition[J].Materials Science and Engineering A,2013,586:301-305.
• [18] 张星.新型ZrAl二元合金组织调控及力学性能研究[D].秦皇岛：燕山大学，2020.ZHANG Xing.Investigation on the control of microstructures and mechanical properties of novel zirconium aluminum binary alloy[D].Qinhuangdao:Yanshan University,2020.
• [19] 蒋晓军.高强度TiZrAl合金的制备及组织性能研究[D].秦皇岛：燕山大学，2015.JIANG Xiao-jun.Preparation,structure and properties of high strength TiZrAl alloys[D].Qinghuangdao:Yanshan University,2015.
• [20] 景然.高强度TiZrAlV合金的制备及组织性能研究[D].秦皇岛：燕山大学，2013.JING Ran.Preparation,structure and properties of high strengtn TiZr-based alloy[D].Qinghuangdao:Yanshan University,2013.
• [21] Liang S X,Ma M Z,Jing R.Preparation of the ZrTiAlV alloy with ultra-high strength and good ductility[J].Materials Science and Engineering A,2012,539:42-47.
• [22] Liang S X,Ma M Z,Jing R.Microstructure and mechanical properties of hot-rolled ZrTiAlV alloys[J].Materials Science and Engineering A,2012,532:1-5.
• [23] Liang S X,Ma M Z,Jing R.Structural evolution and mechanical properties of Zr-45Ti-5Al-3V alloy by heat treatments[J].Materials Science and Engineering A,2012,541:67-72.
• [24] Liu L,Zhang Y,Han J.Nanoprecipitate-strengthened high-entropy alloys[J].Advanced Science,2021,8(23):210-218.
• [25] Ji P F,Liu S G,Shi C B.Synergistic effect of Zr addition and grain refinement on corrosion resistance and pitting corrosion behavior of single α-phase Ti-Zr-based alloys[J].Journal of Alloys and Compounds,2022,896:163-174.

文章评论(Comment)：