张进峰,吴晓春,闵娜,金明江

• 1:苏州职业技术大学电子信息工程学院
• 2:苏州微加测试仪器有限公司
• 3:上海大学材料科学与工程学院
• 4:上海大学测试分析中心

摘要(Abstract)：

热处理是调控合金材料显微组织以获得优异力学、电学等性能的关键工艺。电阻-温度特性是表征合金材料热处理过程中微观组织连续转变的有效方法，是微观组织精细化调控的重要参考。本文结合合金电阻测试仪器及测试方法，对合金电阻-温度特性在微观组织相变、析出动力学、原子短程扩散、热处理工艺参数测定以及电阻温度系数调控等方面的研究进展进行综述，并与相关表征技术进行了对比分析，旨在为采用电阻法研究热处理工艺调控微观组织提升合金材料性能提供参考与借鉴。

关键词(KeyWords)： 微观组织转变;电阻-温度特性;动态表征;相变;热处理工艺

Abstract:

Keywords:

基金项目(Foundation): 省部共建高品质特殊钢冶金与制备国家重点实验室自主课题(SKLASS2022-Z12);; 苏州职业技术大学科研项目(KY20230422)

作者(Author): 张进峰,吴晓春,闵娜,金明江

DOI: 10.13289/j.issn.1009-6264.2025-0408

参考文献(References)：

• [1] 王存宇，常颖，周峰峦，等.高强度高塑性第三代汽车钢的M3组织调控理论与技术[J].金属学报，2020,56(4):400-410.WANG Cun-yu,CHANG Ying,ZHOU Feng-luan,et al.M3microstructure control theory and technology of the third-generation automotive steels with high strength and high ductility[J].Acta Metallurgica Sinica,2020,56(4):400-410.
• [2] 王存宇，杨洁，常颖，等.先进高强度汽车钢的发展趋势与挑战[J].钢铁，2019,54(2):1-6.WANG Cun-yu,YANG jie,CHANG Ying,et al.Development trend and challenge of advanced high strength automobile steels[J].Iron and Steel,2019,54(2):1-6.
• [3] World Steel Association,World Automobile Steel Union,translated by Baosteel Co Ltd.Advanced High-Strength Steels Application Guidelines[M].Beijing:Metallurgical Industry Press,2018:1-2.
• [4] 沈中城，张进峰，严勇健，等.精密扭摆内耗仪的研究进展及其钢中固溶碳测定[J].上海交通大学学报，2010,44(5):683-686.SHEN Zhong-cheng,ZHANG Jin-feng,YAN Yong-jian,et al.Review of precision torsion pendulum mechanical spectrometer and measurement of solution carbon in steel[J].Journal of Shanghai Jiaotong University,2010,44(5):683-686.
• [5] 徐亮亮，谭敦强.Mn含量及退火工艺对Cu-xMn-0.2Ce-0.2Zr合金组织性能的影响[J].金属热处理，2023,48(6):219-228.XU Liang-liang,TAN Dun-qiang.Effects of Mn content and annealing process on microstructure and properties of Cu-xMn-0.2Ce-0.2Zr alloys[J].Heat Treatment of Metals,2023,48(6):219-228.
• [6] 李龙健，于凤云，李仁庚，等.高性能铜合金研究现状及发展趋势[J].特种铸造及有色合金，2021,41(3):293-298.LI Long-jian,YU Feng-yun,LI Ren-geng,et al.Research progress and development trend of high-performance Cu alloys[J].Special Casting and Nonferrous Alloys,2021,41(3):293-298.
• [7] 杨贤军，王勇，徐永红，等.高精密金属箔电阻及电阻合金箔材研究[J].自动化仪表，2018,39(6):54-57.YANG Xian-jun,WANG Yong,XU Yong-hong,et al.Research on the high precision metal foil resistor and material of resistance alloy foil[J].Process Automation Instrumentation,2018,39(6):54-57.
• [8] 周佳煜，王彬文，张宇，等.爆炸冲击波作用下铝合金加筋壁板动态响应[J].科学技术与工程，2024,24(35):14921-14929.ZHOU Jia-yu,WANG Bin-wen,ZHANG Yu,et al.Dynamic response of stiffened aluminum alloy plate hit by shock wave[J].Science Technology and Engineering,2024,24(35):14921-14929.
• [9] 倪磊，惠旭龙，陈翠红，等.两栖飞机铝合金的中低应变率力学性能[J].科学技术与工程，2022,22(18):7757-7764.NI Lei,HUI Xu-long,CHEN Cui-hong,et al.Dynamic properties of aluminum alloys for amphibious aircraft under medium-low strain rate[J].Science Technology and Engineering,2022,22(18):7757-7764.
• [10] 邱越海，弭光宝，李培杰，等.航空发动机高温钛铝合金起燃温度的计算模型研究[J].航空材料学报，2025,45(4):116-123.QIU Yue-hai,MI Guang-bao,LI Pei-jie,et al.Calculation model of ignition temperature of high temperature titanium-aluminum alloy for aero engine[J].Journal of Aeronautical Materials,2025,45(4):116-123.
• [11] 董瀚，廉心桐，胡春东，等.钢的高性能化理论与技术进展[J].金属学报，2020,56(4):558-582.DONG Han,LIAN Xin-tong,HU Chun-dong,et al.High performance steels:the scenario of theory and technology[J].Acta Metallurgica Sinica,2020,56(4):558-582.
• [12] 董瀚，王毛球，翁宇庆.高性能钢的M3组织调控理论与技术[J].钢铁，2010,45(7):5-11.DONG Han,WANG Mao-qiu,WENG Yu-qing.Performance improvement of steels through M3 structure control[J].Iron and Steel,2010,45(7):5-11.
• [13] 喻文新，王勇，杨贤军，等.固溶工艺对Ni-Cr-Al-Fe合金电学性能及屈服强度的影响[J].金属热处理，2020,45(5):62-68.YU Wen-xin,WANG Yong,YANG Xian-jun,et al.Effect of solution treatment on electrical properties and yield strength of Ni-Cr-Al-Fe alloy[J].Heat Treatment of Metals,2020,45(5):62-68.
• [14] 邢博岩，范秀风，闫永旺，等.热处理工艺对变质后A356合金力学性能的影响研究[J].热加工工艺，2025,54(19):120-127.XING Bo-yan,FAN Xiu-feng,YAN Yong-wang,et al.Study on effect of heat treatment process on mechanical properties of A356 alloy after modification[J].Hot Working Technology,2025,54(19):120-127.
• [15] 张进峰，周正存.钢回火碳扩散行为的表征方法[J].科学技术与工程，2022,22(18):7735-7745.ZHANG Jin-feng,ZHOU Zheng-cun.Review of characterization methods of carbon atom occupation and diffusion behavior in steel[J].Science Technology and Engineering,2022,22(18):7735-7745.
• [16] Vieira I,Klemm-Toole J,Buchner E,et al.A dilatometric study of tempering complemented by m??ssbauer spectroscopy and other characterization techniques[J].Scientific Reports,2017,7(1):1-14.
• [17] Lu X W,Jin M J,Jin X J.Origin of low temperature shoulder internal friction peak of Snoek-K??ster peak[J].Solid State Communications,2014,2014(195):31-34.
• [18] 朱国辉，杜宇，张学辉，等.合金元素对双相钢形变及退火织构的影响[J].冶金分析，2011,31(2):32-37.ZHU Guo-hui,DU Yu,ZHANG Xue-hui,et al.Effect of alloying elements on deformation and annealing textures of dual-phase steels[J].Metallurgical Analysis,2011,31(2):32-37.
• [19] Furst S J,Crews J H,Seelecke S.Stress,strain,and resistance behavior of two opposing shape memory alloyactuator wires for resistance based self-sensing applications[J].Journal of Intelligent Material Systems and Structures,2013,24(16):1951-1968.
• [20] Botcharova E,Freudenberger J,Schultz L.Mechanical and electrical properties of mechanically alloyed nanocrystalline Cu-Nb alloys[J].Acta Materialia,2006,54(12):3333-3341.
• [21] Fu H,Yin Y,Zhang Y,et al.Enhancing the comprehensive properties of as-cast Cu-Ni-Si alloys by continuous extrusion combined with subsequent thermomechanical treatment[J].Materials & Design,2022,222:11033.
• [22] Zhang J F,Wu X C,Ding H L.Design and realization of intelligent electrical resistivity measurement system[J].Advanced Material Research,2014,1039:210-216.
• [23] 全国电线电缆标准化技术委员会.电线电缆电性能试验方法第2部分：金属材料电阻率试验：GB/T 3048.2—2007[S].北京：中国标准出版社，2007.National Technical Committee 213 on Wire & Cable of Standardization Administration of China.Test methods for electrical properties of electric cables and wires-Part 2:Test of electrical resistirity of metallic materials:GB/T 3048.2—2007[S].Beijing:Standards Press of China,2007.
• [24] ASTM International.Standard test method for resistivity of electrical conductor materials:ASTM-B193-02[S].West Conshohocken,2002.
• [25] 王亚平，卢柯.非晶态合金晶化过程的高精度电阻监测研究[J].中国科学(E辑):技术科学，2000,30(3):193-199.
• [26] 宿昌厚，鲁效明.论四探针法测试半导体电阻率时的厚度修正[J].计量技术，2005(8):5-7.SU Chang-hou,LU Xiao-ming.On thickness correction in testing semiconductor resistance with four probe method[J].Measurement Technique,2005(8):5-7.
• [27] 鲁效明，宿昌厚.双位组合四探计法测量硅片电阻率[J].微电子学，1994,3(24):60-63.LU Xiao-ming,SU Chang-hou.Measurement of resistivity of double configuration four point probe[J].Microelectronics,1994,3(24):60-63.
• [28] 李建昌，王永，王丹，等.半导体电学特性四探针测试技术的研究现状[J].真空，2011,48(3):1-7.LI Jian-chang,WANG Yong,WANG Dan,et al.Progress of the four-probe technique for semiconductor conductivity characterization[J].Vacuum,2011,48(3):1-7.
• [29] Quantum Design Science Center.综合物理特性测试系统使用手册[M].北京：Quantum Design,2011:7-8.Quantum Design Science Center.Instruction manual of Physical Property Measurement System[M].Beijing:Quantum Design,2011:7-8.
• [30] Linseis Data Center.Instruction Manual LSR-3 Seebeck Effect and Electric Resistivity[M].Shanghai:Linseis Messger??te GmbH,2019:12-13.
• [31] 郭子兰，Strydom A M.四探针原理新设计的低温电阻率测量装置[J].实验室研究与探索，2000,29(11):34-37.GUO Zi-lan,STRYDOM A M.New-designed instrumentation low temperature resistivity measurement by the principle of four probe method[J].Laboratory Research and Exploration,2000,29(11):34-37.
• [32] 仝珏川，陈一安，郭正洪，等.35CrMo钢在构筑成形时连接界面氧化物演变的热力学预测[J].材料热处理学报，2024,45(11):207-215.TONG Jue-chuan,CHEN Yi-an,GUO Zheng-hong,et al.Thermodynamic prediction of oxide evolution at joint interface of 35CrMo steel during hot-compression bonding[J].Transactions of Materials and Heat Treatment,2024,45(11):207-215.
• [33] 李仲勋，蒋元凯，李传维，等.核压力容器用SA508 Gr.3钢冷却过程的相变动力学[J].材料热处理学报，2025,46(8):103-112.LI Zhong-xun,JIANG Yuan-kai,LI Chuan-wei,et al.Phase transformation kinetics of SA508 Gr.3 steel for nuclear pressure vessel during cooling[J].Transactions of Materials and Heat Treatment,2025,46(8):103-112.
• [34] 黄苏起，李玲，吴晓春.新型热作模具钢4Cr3Mn1Mo2V的抗铝熔损性能[J].材料热处理学报，2021,42(8):91-98.HUANG Su-qi,LI Ling,WU Xiao-chun.Erosion resistance of new hot working die steel 4Cr3Mn1Mo2V in molten aluminum[J].Transactions of Materials and Heat Treatment,2021,42(8):91-98.
• [35] Lu K,Lück R,Predel B.The temperature vs time transformation (T-T-T) diagram for a transition from the amorphous to the nanocrystalline state[J].Acta Materialia,1994,42(7):2303-2311.
• [36] Ueland S,Schuh C.Surface roughness-controlled superelastic hysteresis in shape memory microwires[J].Scripta Materialia,2014,(82):1-4.
• [37] Rodrigue H,Wang W,Han M,et al.An overview of shape memory alloy-coupled actuators and robots[J].Soft Robotics,2017,4(1):3-15.
• [38] Lu Y F,Zhang R R,Xu Y,etal.Resistance characteristics of SMA actuator based on the variable speed phase transformation constitutive model[J].Materials 2020,13(6):1479.
• [39] Casati R,Saghafi F,Biffi C A,et al.Improved functional properties and efficiencies of nitinol wires under high-performance shape memory effect (HP-SME)[J].Journal of Materials Engineering & Performance,2017,26(10):1-6.
• [40] 徐磊，王瑞，张淑洁.Ni-Ti形状记忆合金纤维相变的电阻特性[J].纺织学报，2010,31(3):15-19.XU Lei,WANG Rui,ZHANG Shu-jie.Electrical resistance properties of Ni-Ti shape memory alloy fiber in phase transition[J].Journal of Textile Research,2010,31(3):15-19.
• [41] Casati R,Vedani M,Tofail S A M,et al.On the preparation and characterization of thin NiTi shape memory alloy wires for MEMS[J].Fracture & Structural Integrity,2013(23):7-12.
• [42] 张进峰，吴晓春，闵娜.SDCM1新型热作模具钢回火过程中碳扩散行为的电阻表征[J].材料热处理学报，2021,42(5):88-95.ZHANG Jin-feng,WU Xiao-chun,MIN Na.Characterization of carbon diffusion behaviors of SDCM1 new hot working die steel during tempering by in-situ resistance method[J].Transactions of Materials and Heat Treatment,2021,42(5):88-95.
• [43] Christian J.Thoery of Transformation in Metals and Alloys[M].Oxford:Pergamon Press,1997:433-489.
• [44] Sherman A M,Eldis G T,Cohen M.The aging and tempering of iron-nickel-carbon martensites[J].Metallurgical Transactions A,1983(14):995-1005.
• [45] Kissinger H E.Reaction kinetics in differential thermal analysis[J].Analytical Chemistry,1957,29(11):1702-1706.
• [46] 张进峰.中低碳钢碳扩散行为的电阻和内耗方法研究[D].上海：上海大学，2021.ZHANG Jin-feng.Study on carbon diffusion behaviors of medium and low carbon steels by resistance and internal friction methods[D].Shanghai:Shanghai Unversity,2021.
• [47] Ferragut R,Somoza A,Torriani I.Pre-precipitation study in the 7012 Al-Zn-Mg-Cu alloy by electrical resistivity[J].Materials Science and Engineering A,2002,334(1/2):1-5.
• [48] 郭婧，李强，瞿红维，等.轧辊用新型高速钢特征温度下碳化物的析出动力学[J].材料热处理学报，2013,34(1):117-121.GUO Jing,LI Qiang,QU Hong-wei,et al.Precipitation kinetics of the carbides in a new high speed steel for roller at characteristic temperatures[J].Transactions of Materials and Heat Treatment,2013,34(1):117-121.
• [49] Zhang J F,Wu X C,Min N,et al.Internal friction behavior associated with martensitic decomposition in low-carbon dual-phase steel[J].ISIJ International,2019,59(7):1369-1374.
• [50] Jin X,Zeng F,Sun R,et al.The influential factors of baking time in internal friction and bake-hardening properties on low carbon steel[J].Journal of Physics Conference Series,2021,1948(1):012208.
• [51] 葛庭燧，容保粹，王业宁.钢中碳氮的扩散、脱溶和沉淀[J].物理学报，1955,11(1):91-106.Kê Ting-sui,RONG Bao-cui,WANG Ye-ning.Diffusion and precipation of carbon and nitrogen from solid solution in iron and steel[J].Acta Physica Sinca,1955,11(1):91-106.
• [52] 冯硕，丁腾威，李娜，等.深冷处理对轴承钢及其磨削加工表面质量的影响[J].表面技术，2025,54(9):248-259.FENG Shuo,DING Teng-wei,LI Na,et al.Effect of cryogenic treatment on bearing steel and grinding surface quality[J].Surface Technology,2025,54(9):248-259.
• [53] Tao C,Cheng X,Li Z,et al.Mechanism of cryogenic,solid solution and aging compound heat treatment of die-cast Al alloys considering microstructure variation[J].Rare Metals,2023,42(9):3130-3138.
• [54] 胡晓娜，陈威，邹晋.深冷处理技术在铜合金研究中的应用综述[J].材料热处理学报，2024,45(11):1-14.HU Xiao-na,CHEN Wei,ZOU Jin.Review of application of cryogenic treatment techniques in copper alloys research[J].Transactions of Materials and Heat Treatment,2024,45(11):1-14.
• [55] 谢尘，吴晓春，闵娜，等.3DAP研究高碳高合金钢深冷处理过程的C偏聚行为[J].金属学报，2015,51(3):325-332.XIE Chen,WU Xiao-chun,MIN Na,et al.Carbon segregation behavior of high-carbon high-alloy steel during deep cryogenic treatment using 3DAP[J].Acta Metallurgica Sinica,2015,51(3):325-332.
• [56] Ullakko K,Gavriljuk V G,Nadutov V M.Aging of freshly formed Fe-based martensites at low temperatures[J].Metallurgical & Materials Transactions A,1994,25(5):889-909.
• [57] 谢尘，周龙梅，闵娜，等.深冷处理对高碳高合金工具钢SDC99回火过程碳配分的影响[J].材料研究学报，2016,30(11):801-810.XIE Chen,ZHOU Long-mei,MIN Na,et al.Effect of deep cryogenic treatment on carbon partition of tempered high carbon high alloy tool steel SDC99[J].Chinese Journal of Materials Research,2016,30(11):801-810.
• [58] 毛宏，吴红庆，涂宇杰，等.热处理工艺对3种不同Cr系冷作模具钢热处理变形的影响[J].材料热处理学报，2024,45(8):154-163.MAO Hong,WU Hong-qing,TU Yu-jie,et al.Effect of heat treatment process on heat treatment deformation of three different Cr series cold working die steels[J].Transactions of Materials and Heat Treatment,2024,45(8):154-163.
• [59] 左鹏鹏，何雪松，吴晓春，等.三维原子探针表征淬回火Cr-Mo-V-Ni中合金钢的元素分布[J].材料导报，2017,31(22):85-89.ZUO Peng-peng,HE Xue-song,WU Xiao-chun,et al.Elements distributions in quenched and tempered Cr-Mo-V-Ni medium-alloy steel characterized by three dimension atom probe[J].Materials Review,2017,31(22):85-89.
• [60] Xu Y T,Li W,Du H,et al.Tailoring the metastable reversed austenite from metastable Mn-rich carbides[J].Acta Materialia,2021,214:116986.
• [61] 张进峰，吴晓春，闵娜，等.热作模具钢低温回火短程碳扩散行为[J].材料热处理学报，2025,46(11):133-140.ZHANG Jin-feng,WU Xiao-chun,MIN Na,et al.Short range diffusion behaviors of carbon atoms during low-temperature tempering of hot work die steel[J].Transactions of Materials and Heat Treatment,2025,46(11):133-140.
• [62] 高兴成，吴博雅，吴晓春.4Cr5Mo2V热作模具钢的CCT曲线及碳化物沿晶析出温度测定[J].金属热处理，2024,49(9):72-79.GAO Xing-cheng,WU Bo-ya,WU Xiao-chun.Measurement of CCT curves and carbide intergranular precipitation temperature of 4Cr5Mo2V die casting die steel[J].Heat Treatment of Metals,2024,49(9):72-79.
• [63] 邵严，吴晓春.几种新型热作模具钢的性能对比研究[J].上海金属，2011,33(2):1-4.SHAO Yan,WU Xiao-chun.Propertities comparison for different kinds of new hot working die steels[J].Shanghai Metals,2011,33(2):1-4.
• [64] Xu J,Dong X M,Feng Z X,et al.Hot deformation behaviour and optimization of process parameters for an as-cast Cu-20Ni-20Mn alloy[J].Journal of Materials Research and Technology,2023,26:9346-9355.
• [65] Braudaway D W.Precision resistors:A review of material characteristics,resistor design,and construction practices[J].IEEE Transactions on Instrumentation and Measurement,1999,48(5):878-883.
• [66] 全国仪表功能材料标准化技术委员会.精密电阻合金电阻温度系数测试方法：GB/T 6148—2005[S].北京：中国标准出版社，2005.Technical Committee 419 on Instrument Functional Materials of Standardization Administration of China.Test method for temperature-resistance coefficient of precision resistance alloy:GB/T 6148—2005[S].Beijing:Standards Press of China,2005.
• [67] Sato T.On some properties of the Cu-Mn alloy system[J].Journal of the Physical Society of Japan,1950,5(5):287-292.
• [68] Zhu S Y,Yang Q K,Gan K F,et al.A strong ferritic high-resistivity multicomponent alloy with tunable ordered coherent multicomponent nanoprecipitates[J].Acta Materialia,2022,238:118209.
• [69] Zhu S Y,Yan D S,Zhang Y,et al.Strong and ductile Resinvar alloys with temperature-and time-independent resistivity[J].Nature Communications,2024,15:7199.

文章评论(Comment)：