范映伟

• 1:中国航发北京航空材料研究院航空材料检测与评价北京市重点实验室材料检测与评价航空科技重点实验室中国航空发动机集团材料检测与评价重点实验室

摘要(Abstract)：

综述了近年来颗粒增强、连续纤维增强和石墨烯增强金属基复合材料微观损伤行为的研究进展,分析了上述3类金属基复合材料在不同载荷条件下发生损伤的模式及其微观机理,并对目前金属基复合材料微观损伤行为的研究中存在的问题进行了分析,对未来的研究方向进行了展望。

关键词(KeyWords)： 金属基复合材料(MMC);损伤行为;微观机制

Abstract:

Keywords:

基金项目(Foundation): 国家重点研发计划项目(2017YFA0403704)

作者(Author): 范映伟

DOI: 10.13289/j.issn.1009-6264.2020-0116

参考文献(References)：

• [1] Chawla N,Chawla K K.Metal Matrix Composites[M].New York:Springer,2013.
• [2] Withers P J,Preuss M.Fatigue and damage in structural materials studied by X-ray tomography[J].Annual Review of Materials Research,2012,42:81-103.
• [3] 张胜利,宋克兴,国秀花,等.TiB2颗粒混杂对TiB2/Cu复合材料微观组织和性能的影响[J].材料热处理学报,2018,39 (8):7-13.ZHANG Sheng-li,SONG Ke-xing,GUO Xiu-hua,et al.Effect of mixing TiB2 particles on microstructure and properties of TiB2/Cu Composites[J].Transactions of Materials and Heat Treatment,2018,39(8):7-13.
• [4] 苏晓风,陈浩然,王利民.金属基复合材料细观损伤机制与宏观性质关系的研究[J].复合材料学报,1999,16 (2):1-8.SU Xiao-feng,CHEN Hao-ran,WANG Li-min.Relations of the mesoscopic damage mechanisms with the macroscopic properties of metal matrix composites[J].Acta Materiae Compositae Sinica,1999,16(2):1-8.
• [5] 李晶,杨耀东,孙书.基于不同固溶温度下的铝基复合材料组织与性能[J].失效分析与预防,2018,13 (1):1-4.LI Jing,YANG Yao-dong,SUN Shu.Microstructrure and properties of aluminum matrix composite based on different solution temperature[J].Failure Analysis and Prevention,2018,13(1):1-4.
• [6] Hu L,Wang E.Fabrication and mechanical properties of SiCw:ZK51A magnesium matrix composite by two-step squeeze casting[J].Materials Scicence and Engineering A,2000,278:267-271.
• [7] Williams J J,Flom Z,Amell A A,et al.Damage evolution in SiC particle reinforced Al alloy matrix composites by X-ray synchrotron tomography[J].Acta Materialia,2010,58 (18):6194-6205.
• [8] 刘一雄,郑振兴,朱德智,等.热处理对SiCp/7075Al复合材料组织和性能的影响[J].材料热处理学报,2018,39 (9):1-6.LIU Yi-xiong,ZHENG Zhen-xing,ZHU De-zhi,et al.Effects of heat treatment on microstructure and mechanical properties of SiCp/7075Al composites[J].Transaction of Materials and Heat Treatment,2018,39(9):1-6.
• [9] 王武杰,洪雨,吴玉程.SiC粒径比及体积比对SiCp/Al-5Si-2.5Mg复合材料组织及性能影响[J].材料热处理学报,2018,39 (7):7-14.WANG Wu-jie,HONG Yu,WU Yu-cheng.Effect of SiC particle size ratio and volume fraction ratio on microstructure and properties of SiCp/Al-5Si-2.5Mg composites[J].Transactions of Materials and Heat Treatment,2018,39(7):7-14.
• [10] 权高峰,柴东朗,宋余九,等.增强体种类及含量对金属基复合材料力学性能的影响[J].复合材料学报,1999,16(2):63-67.QUAN Gao-feng,CHAI Dong-lang,SONG Yu-jiu,et al.Effects of category and content of reinforcements on mechanical properties of metal matrix composites[J].Acta Materiae Compositae Sinica,1999,16(2):63-67.
• [11] 周建波,袁文革,崔春翔.原位复合纳米颗粒增强金属基复合材料的强韧化机理[J].材料导报,2005,19(6):170-185.ZHOU Jian-bo,YUAN Wen-ge,CUI Chun-xiang.Strengthening and toughening mechanism of metal matrix composites reinforced by in situ formed nanometer particles[J].Materials Review,2005,19(6):170-185.
• [12] Sateesh N H,Kumar G C M,Krishna P.Influence of Ni-P Coated SiC and laser scan speed on the microstructure and mechanical properties of IN625 metal matrix composites[J].Lasers in Manufacturing and Materials Processing,2015,2:187-198.
• [13] Komai K,Minoshima K.Tensile and fatigue fracture behavior and water-environment effects in a SiC-whisker/7075-aluminum composite[J].Composites Science and Technology,1993,46:59-66.
• [14] Chawla N,Andres C,Jones J W,et al.Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080 Al/SiCp composite[J].Metallurgical and Materials Transactions A,1998,29:2843-2854.
• [15] Pandey A B,Chawla N.The fracture toughness and fatigue behavior of DRA[J].JOM,1999,51 (11):69-72.
• [16] Lee S-H,Choi Y-G,Kim S-T.Initiation and growth behavior of small surface fatigue cracks on SiC particle-reinforced aluminum composites[J].Advanced Composite Materials,2010,19:317-330.
• [17] Chawla K K,Chawla N.Kirk-Othmer Encyclopedia[M].New York:John-Wiley and Sons,2004.
• [18] Boselli J,Pitcher P D,Gregson P J,et al.Numerical modelling of particle distribution effects on fatigue in Al-SiCp composites[J].Materials Science and Engineering A,2001,300:113-124.
• [19] Ayyar A,Chawla N.Microstructure-based modeling of crack growth in particle reinforced composites[J].Composites Science and Technology,2006,66:1980-1994.
• [20] Chapman N C,Silva J,Williams J J,et al.Charaterisation of thermal cycling induced cavitation in particle reinforced metal matrix composites by three-dimensional (3D) X-ray synchrotron tomography[J].Materials Science and Technology,2015,31 (5):573-578.
• [21] Dlouhy A,Merk N,Eggeler G.A microstructural study of creep in short fibre reinforced aluminium alloys[J].Acta Metallurgica et Materialia,1993,41 (11):3245-3256.
• [22] Dlouhy A,Eggeler G,Merk N.A micromechanical model for creep in short fibre reinforced aluminium alloys[J].Acta Metallurgica et Materialia,1995,43 (2):535-550.
• [23] Kurumlu D,Payton E J,Young M L,et al.High-temperature strength and damage evolution in short fiber reinforced aluminum alloys studied by miniature creep testing and synchrotron microtomography[J].Acta Materialia,2012,60:67-78.
• [24] Whitehouse A F,Winand H M A,Clyne T W.The Effect of processing route and reinforcement geometry on isothermal creep behaviour of particulate and short fibre MMCs[J].Materials Science and Engineering A,1998,242:57-69.
• [25] Biner S B.An analysis of grain boundary sliding and grain boundary cavitation in discontinuously reinforced composites[J].Acta Materialia,1996,44 (5):1813-1829.
• [26] Naseem K,Yang Y,Luo X,et al.SEM in situ study on the mechanical behaviour of SiCf/Ti composite subjected to axial tensile load[J].Materials Science and Engineering A,2011,528 (13/14):4507-4515.
• [27] Yang J M,Jeng S M,Yang C J.Fracture mechanisms of fiber-reinforced titanium alloy matrix composites part I:Interfacial behavior[J].Materials Science and Engineering A,1991,138:155-167.
• [28] Jeng S M,Yang J-M,Yang C J.Fracture mechanisms of fiber-reinforced titanium alloy matrix composites part II:Tensile behavior[J].Materials Science and Engineering A,1991,138:169-180.
• [29] 田亮,王振军,周金秋,等.基于细观力学有限元法的碳纤维增强铝合金复合材料横向拉伸行为研究[J].失效分析与预防,2018,13 (2):83-88.TIAN Liang,WANG Zheng-jun,ZHOU Jin-qiu,et al.Research on transverse mechanical and fracture behavior of carbon fiber reinforced aluminum alloy composites based on micromechancial FEM[J].Failure Analysis and Prevention,2018,13(2):83-88.
• [30] 李佩桓,张勇,王涛,等.连续SiC纤维增强金属基复合材料研究进展[J].材料工程,2016,44 (8):121-129.LI Pei-huan,ZHANG Yong,WANG Tao,et al.Research progress on continuous SiC fiber reinforced metal matrix composite[J].Journal of Materials Engineering 2016,44(8):121-129.
• [31] Warrier S G,Majumdar B S,Miracle D B.Interface effects on crack deflection and bridging during fatigue crack growth of titanium matrix composites[J].Acta Materialia,1997,45 (12):4969-4980.
• [32] Zhang W,Gu M,Chen J,et al.Tensile and fatigue response of alumina-fiber-reinforced aluminum matrix composite[J].Materials Science and Engineering A,2003,341:9-17.
• [33] Tanaka Y,Kagawa Y,Liu Y-F,et al.Interface damage mechanism during high temperature fatigue test in SiC fiber-reinforced Ti alloy matrix composite[J].Materials Science and Engineering A,2001,314:110-117.
• [34] Bettge D,Günther B,Wedell W,et al.Mechanical behavior and fatigue damage of a titanium matrix composite reinforced with continuous SiC fibers[J].Materials Science and Engineering A,2007,452-453:536-544.
• [35] Withers P J,Lopez-Crespo P,Kyrieleis A,et al.Evolution of crack-bridging and crack-tip driving force during the growth of a fatigue crack in a Ti/SiC composite[J].Proceedings of the Royal Society A,2012,468:2722-2743.
• [36] Hung Y C,Bennett J A,Garcia-Pastor F A,et al.Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ[J].Acta Materialia,2009,57 (2):590-599.
• [37] Xu Z R,Chawla K K,Wolfenden A,et al.Stiffness loss and density decrease due to thermal cycling in an alumina fiber/magnesium alloy composite[J].Materials Science and Engineering A,1995,203:75-80.
• [38] Jeng S M,Yang J-M.Creep behavior and damage mechanisms of SiC-fiber-reinforced titanium matrix composite[J].Materials Science and Engineering A,1993,171:65-75.
• [39] Geim A K,Novoselov K S.The Rise of Graphene[J].Nature Materials,2007,6:183-191.
• [40] Kumar H G P,Xavior M A.Graphene reinforced metal matrix composite (GRMMC):A review[J].Procedia Engineering,2014,97:1033-1040.
• [41] 吴海峰,李建超,张学习,等.石墨烯/铝复合材料挤压过程组织演变[J].材料热处理学报,2018,39 (4):14-19.WU Hai-feng,LI Jian-chao,ZHANG Xue-xi,et al.Microstructural evolution of graphene/6061 Al composites during hot extrusion[J].Transactions of Materials and Heat Treatment,2018,39(4):14-19.
• [42] 李勇,赵亚茹,李焕,等.石墨烯增强金属基复合材料的研究进展[J].材料导报,2016,30 (6):71-76.LI Yong,ZHAO Ya-ru,LI Huan,et al.Research progress of metal matrix composites hybridized with graphene as reinforcement[J].Materials Review,2016,30(6):7-14.
• [43] Zhao C.Enhanced strength in reduced graphene oxide/nickel composites prepared by molecular-level mixing for structural applications[J].Applied Physics A,2014,118 (2):409-416.
• [44] Fadavi Boostani A,Tahamtan S,Jiang Z Y,et al.Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles[J].Composites Part A:Applied Science and Manufacturing,2015,68:155-163.
• [45] Rashad M,Pan F,Hu H,et al.Enhanced tensile properties of magnesium composites reinforced with graphene nanoplatelets[J].Materials Science and Engineering A,2015,630:36-44.
• [46] Dorri Moghadam A,Omrani E,Menezes P L,et al.Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene-A review[J].Composites Part B:Engineering,2015,77:402-420.
• [47] Tjong S C.Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets[J].Materials Science and Engineering,2013,74 (10):281-350.
• [48] Wang J,Li Z,Fan G,et al.Reinforcement with graphene nanosheets in aluminum matrix composites[J].Scripta Materialia,2012,66 (8):594-597.
• [49] Shin S E,Choi H J,Shin J H,et al.Strengthening behavior of few-layered graphene/aluminum composites[J].Carbon,2015,82:143-151.
• [50] Kim Y,Lee J,Yeom M S,et al.Strengthening effect of single-atomic-layer graphene in metal-graphene nanolayered composites[J].Nature Communications,2013,4:2114.
• [51] Lin D,Richard Liu C,Cheng G J.Single-layer graphene oxide reinforced metal matrix composites by laser sintering:Microstructure and mechanical property enhancement[J].Acta Materialia,2014,80:183-193.
• [52] Das A,Harimkar S P.Effect of graphene nanoplate and silicon carbide nanoparticle reinforcement on mechanical and tribological properties of spark plasma sintered magnesium matrix composites[J].Journal of Materials Science and Technology,2014,30(11):1059-1070.
• [53] Zhai W,Shi X,Wang M,et al.Grain refinement:A mechanism for graphene nanoplatelets to reduce friction and wear of Ni3Al matrix self-lubricating composites[J].Wear,2014,310 (1/2):33-40.
• [54] Zhai W,Shi X,Yao J,et al.Investigation of mechanical and tribological behaviors of multilayer graphene reinforced Ni3Al matrix composites[J].Composites Part B:Engineering,2015,70:149-155.
• [55] Ibrahim A M M,Shi X,Zhang A,et al.Tribological characteristics of NiAl matrix composites with 1.5 wt% graphene at elevated temperatures:An experimental and theoretical study[J].Tribology Transactions,2015,58(6):1076-1083.
• [56] Xu Z,Zhang Q,Shi X,et al.Tribological properties of TiAl matrix self-lubricating composites containing multilayer graphene and Ti3SiC2at high temperatures[J].Tribology Transactions,2015,58(6):1131-1141.
• [57] Zhai W,Shi X,Wang M,et al.Effect of graphene nanoplate addition on the tribological performance of Ni3Al matrix composites[J].Journal of Composite Materials,2013,48(30):3727-3733.

文章评论(Comment)：