挤压态镁合金板材复合变形过程中的孪晶组织演变规律Evolution of twin structure in the process of compound deformation of as-extruded magnesium alloy sheet
王忠堂,张宏亮,王明浩,李艳娟,杨君宝
摘要(Abstract):
采用扫描电镜(SEM)研究了挤压态镁合金压痕—压平复合变形过程中动态再结晶及孪晶组织演变规律。结果表明:在镁合金压痕—压平复合变形过程中,随着复合变形系数和变形温度的增加,AZ31镁合金的孪晶数量逐渐增多,动态再结晶程度增大,晶粒细化效果明显。动态再结晶的主要形核之处是原始晶粒的晶界处,动态再结晶新晶粒产生于原始晶粒的晶界处,且形状为典型的项链状结构,孪晶界也是动态再结晶的有利形核位置。在压痕-压平复合变形过程中,较低的变形温度和较大的变形程度有利于孪晶组织的形成,且孪晶组织容易出现在大晶粒内部。
关键词(KeyWords): AZ31镁合金;压痕—压平复合变形;动态再结晶;孪晶组织
基金项目(Foundation): 国家自然科学基金(51575366);; 辽宁省教育厅资助项目(LG201701)
作者(Author): 王忠堂,张宏亮,王明浩,李艳娟,杨君宝
DOI: 10.13289/j.issn.1009-6264.2019-0354
参考文献(References):
- [1] Yang Q,Ghosh A K.Production of ultrafine-grain microstructure in Mg alloy by alternate biaxial reverse corrugation[J].Acta Materialia,2006,54(19):5147-5158.
- [2] Wang W K,Zhang W C,Chen W Z,et al.Effect of initial texture on the bending behavior,microstructure and texture evolution of ZK60 magnesium alloy during the bending process[J].Journal of Alloys and Compounds,2018,737:505-514.
- [3] Hassani F Z,Ketabchi M,Hassani M T.Effect of twins and non-basal planes activated by equal channel angular rolling process on properties of AZ31 magnesium alloy[J].Journal of Materials Science,2011,46:7689-7695.
- [4] Yu Z W,Tang A T,He J J,et al.Effect of high content of manganese on microstructure,texture and mechanical properties of magnesium alloy[J].Materials Characterization,2018,136:310-317.
- [5] Cheng W L,Wang L F,Zhang H,et al.Enhanced stretch formability of AZ31 magnesium alloy thin sheet by precrossed twinning lamellas induced static recrystallizations[J].Journal of Materials Processing Technology,2018,254:302-309.
- [6] Barnett M,Setty M,Siska F.Estimating critical stresses required for twin growth in a magnesium alloy[J].Metallurgical and Materials Transactions A,2013,44(7):2962-2969.
- [7] Wong T W,Hadadzadeh A,Wells M A.High temperature deformation behavior of extruded AZ31B magnesium alloy[J].Journal of Materials Processing Technology,2018,251:360-368.
- [8] Onuki Y,Hara K,Utsunomiya H,et al.High-speed rolling of AZ31 magnesium alloy having different initial textures[J].Journal of Materials Engineering and Performance,2018,24(2):972-985.
- [9] Adrien C,Liu P,Liu Q.An experiment and numerical study of texture change and twinning-induced hardening during tensile deformation of an AZ31 magnesium alloy rolled plate[J].Materials Science and Engineering A,2013,561(20):167-173.
- [10] Liu D,Liu Z Y,Wang E D.Evolution of twins and texture and its effects on mechanical properties of AZ31 magnesium alloy sheets under different rolling process parameters[J].Transactions of Nonferrous Metals Society of China,2015,25(11):3585-3594.
- [11] Tripathi A.Microstructure and texture evolution in AZ31 magnesium alloy during caliber rolling at different temperatures[J].Journal of Magnesium and Alloys,2017,5(3):340-347.
- [12] 张士宏,宋广胜,徐勇,等.施密特因子在镁合金微观变形机制研究中的应用[J].精密成形工程,2014,6(6):1-6.ZHANG Shi-hong,SONG Guang-sheng,XU Yong,et al.Application of schmid factor in Mg alloy deformation micro-mechanism investigation[J].Journal of Netshape Forming Engineering,2014,6(6):1-6.
- [13] 张钰婷,宋广胜,郝志菲,等.基于施密特因子计算分析拉伸孪晶对镁合金变形的影响[J].特种铸造及有色合金,2017,37(10):1146-1150.ZHANG Yu-ting,SONG guang-sheng,HAO Zhi-fei,et al.et al.Effect of extension twin on plastic deformation of Mg alloy based on schmid factor calculation[J].Special Casting and Nonferrous Alloys,2017,37(10):1146-1150.
- [14] Kudo S,Yokoyama S,Shimoyama K,et al.Effect of dimple patterning conditions of periodical straining rolling on microstructures and mechanical properties of AZ31 sheets[J].Materials Science and Engineering A,2017,680:75-84.
- [15] 丁雪征,刘天模,陈建,等.孪晶界对 AZ31 镁合金静态再结晶的影响[J].中国有色金属学报,2013,23(1):1-8.DING Xue-zheng,LIU Tian-mo,CHEN Jian et al.Effect of twin boundary on static recrystallization of AZ31 magnesium alloy[J].The Chinese Journal of Nonferrous Metals,2013,23(1):1-8.
- [16] 兖利鹏,李全安,陈晓亚.剧烈塑性变形工艺加工超细晶镁合金的强化机理[J].材料热处理学报,2019,40(3):20-26.YAN Li-peng,LI Quan-an,CHEN Xiao-ya.Strengthening mechanism of ultrafine grained magnesium alloy processed by severe plastic deformation[J].Transactions of Materials and Heat Treatment,2019,40(3):20-26.
- [17] 兖利鹏,李全安,陈晓亚.剧烈塑性变形工艺加工镁合金的研究进展[J].材料热处理学报,2018,39(11):1-9.YAN Li-peng,LI Quan-an,CHEN Xiao-ya.Research of severe plastic deformation on magnesium alloys[J].Transactions of Materials and Heat Treatment,2018,39(11):1-9.
- [18] 何杰军,吴鲁淑.挤压态AZ31镁合金变形组织演变机制[J].材料热处理学报,2017,38(1):43-49.HE Jie-jun,WU Lu-shu.Microstructure evolution mechanism of extruded AZ31 magnesium alloy during deformation[J].Transactions of Materials and Heat Treatment,2017,38(1):43-49.
- [19] 周慧子,肖寒,曾文文,等.AZ31镁合金型材塑性变形行为与力学性能[J].材料热处理学报,2017,38(5):36-41.ZHOU Hui-zi,XIAO Han,ZENG Wen-wen,et al.Plastic deformation behavior and mechanical properties of AZ31 magnesium alloy profiles[J].Transactions of Materials and Heat Treatment,2017,38(5):36-41.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||