戴晓元,夏长清,华熳煜,彭小敏

• 1:长沙理工大学汽车与机械工程学院
• 2:中南大学材料科学与工程学院

摘要(Abstract)：

采用金相显微镜和透射电子显微镜研究了含钪Al-Zn-Mg-Cu-Zr系铝合金组织的再结晶,测试了不同温度下退火1h合金的硬度。结果表明:含0.20%Sc的7xxx系铝合金(冷变形量50%)的再结晶起始温度为475℃,再结晶终了温度为525℃。合金在均匀化以及热加工过程中析出细小、弥散的二次A l3(Sc,Zr)粒子钉扎位错、亚晶界和晶界,使回复过程中的位错运动受阻,保持基体内较高的位错的密度,阻碍加热时位错重新排列呈亚晶界以及更进一步发展成大角度晶界的过程;阻碍了再结晶核心长大过程,阻碍大角度晶界的迁移,从而提高再结晶温度。

关键词(KeyWords)： Sc;二次Al3(Sc,Zr)粒子;再结晶

Abstract:

Keywords:

基金项目(Foundation): 湖南省教育厅资助项目(08C093);; 国家重点基础研究发展规划项目(2005CB623706)

作者(Author): 戴晓元,夏长清,华熳煜,彭小敏

DOI: 10.13289/j.issn.1009-6264.2010.01.021

参考文献(References)：

• [1]Imamura T.Current status and trend of applicable material technology for aerospace structure[J].Journal of Japan of Light Metals,1999,49(7):302-309.
• [2]Lengfeld P.Microstructure and mechanical behavior of spray deposited Zn modified 7xxx series Al alloys[J].International Journal of RapidSolidfication,1995,8(4):237-265.
• [3]Norman A F,Hyde K,Costello F.Examination of the effect of Sc on 2000 and 7000 series aluminum alloy castings:for improvements in fusionwelding[J].Materials Science and Engineering A,2003,354:188-198.
• [4]戴晓元,夏长清,马科,等.Sc对Al-Zn-Mg-Cu-Zr合金铸态组织和力学性能的影响[J].中国有色金属学报,2007,17(8):1324-1329.DAI Xiao-yuan,XIA Chang-qing,MA Ke,et al.Effect of Sc on as-cast microstructures and mechanical properties of Al-Zn-Mg-Cu-Zr alloys[J].The Chinese Journal of Nonferrous Metals,2007,17(8):1324-1329.
• [5]Senkov O N,Miracle D B,Milman Y V,et al.Low temperature mechanical properties of scandium-modified Al-Zn-Mg-Cu alloys[J].MaterialsScience Forum,2002,396-402:664-670.
• [6]Milman Y V,Sirko A I,Lotsko D V,et al.Microstructure and mechanical properties of cast and wrought Al-Zn-Mg-Cu alloys modified with Zr andSc[J].Materials Science Forum,2002,396-402,1127-1132.
• [7]YIN Zhi-min,JIANG Feng,PAN Qing-lin,et al.Microstructures and mechanical properties of Al-Mg and Al-Zn-Mg based alloys containing minorscandium and zirconium[J].Transactions of Nonferrous Metals Society of China,2003,13(3):515-520.
• [8]李海,杨迎新,郑子樵,等.少量Sc对7055铝合金组织与性能的影响[J].材料科学与工艺,2006,14(1):46-49.LI Hai,YANG Ying-xin,ZHENG Zi-qiao,et al.Effect of minor addition of scandium on microstructures and mechanical properties of 7055aluminum alloy[J].Materials Science and Technology,2006,14(1):46-49.
• [9]Miura Y,Shioyama O,Hara D.Recrystallization of Al-3Mg and Al-3Mg-0.2Sc alloys[J].Materials Science Forum,1996:217-222:505-510.
• [10]Dougherty L M,Robertson I M,Vetrano J S.Direct observation of the behavior of grain boundaries during continuous dynamic recrystallization in anAl-4Mg-0.3Sc alloy[J].Acta Materialia,2003,51:4367-4378.
• [11]YUKun,LI Wen-xian,LI Song-rui,et al.Mechanical properties and microstructure of aluminum alloy2618 with Al3(Sc,Zr)phase[J].MaterialsScience and Engineering A,2004,368:88-93.
• [12]Vladivoj Ocenasek,Margarita Slamova.Resistance to recrystallization due to Sc and Zr addition to Al-Mg alloys[J].Materials Characterization,2001,47:157-162.
• [13]赵卫涛,阎德胜,戎利建.变形Al-Mg-Sc-Zr合金退火组织的TEM观察[J].金属学报,2005,41(11):1150-1154.ZHAO Wei-tao,YAN De-sheng,RONG Li-jian.TEMobservation of annealing microstructure of deformed Al-Mg-Sc-Zr alloy[J].Acta MetallurgicaSinica,2005,41(11):1150-1154.
• [14]潘青林,尹志民,高拥政,等.Al-Mg-Sc合金的再结晶[J].中国有色金属学报,1998,8(3):427-430.PAN Qing-lin,YIN Zhi-min,GAO Yong-zheng,et al.Recrystallization of Al-Mg-Sc alloy[J].The Chinese Journal of Nonferrous Metal,1998,8(3):427-430.
• [15]曹明盛.物理冶金基础[M].北京:冶金工业出版社,1985.
• [16]毛卫民,赵新兵.金属的再结晶与晶粒长大[M].北京:冶金工业出版社,1994.
• [17]卡恩R W,哈森P,克雷默E J.材料科学与技术丛书(第15卷)[M].雷廷权,译.北京:科学出版社,1999.

文章评论(Comment)：