江海涛,孙璐,蔡正旭,张成刚

• 1:北京科技大学高效轧制国家工程研究中心
• 2:枣庄通晟实业有限公司

摘要(Abstract)：

采用取向分布函数法分析并研究了冷轧前预处理和冷轧变形量对6082铝合金再结晶的影响。结果表明,6082铝合金的再结晶织构主要由立方织构和旋转立方织构组成。不经过热处理和经过固溶时效处理的试样,随着冷轧变形量的增加,再结晶织构组分明显增加;只经过固溶处理的试样,随着冷轧变形量的增加,再结晶织构组分变化不明显,说明冷轧前固溶处理可以明显弱化再结晶织构。

关键词(KeyWords)： 6082铝合金;预处理;冷轧变形量;再结晶织构

Abstract:

Keywords:

基金项目(Foundation): 国家“十二五”镁合金支撑项目课题三——镁合金板带高效低成本轧制技术开发(2011BAE22B00)

作者(Author): 江海涛,孙璐,蔡正旭,张成刚

DOI: 10.13289/j.issn.1009-6264.2013.08.030

参考文献(References)：

• [1]王孟君,黄电源,姜海涛.汽车用铝合金的研究进展[J].金属热处理,2006,31(9):34-38.WANG Meng-jun,HUANG Dian-yuan,JIANG Hai-tao.Research progress of aluminum alloys for the automotive industry[J].Heat Treatment ofMetals,2006,31(9):34.
• [2]Miller W S,Zhuang L,Bottema J.Recent development in aluminium alloys for the automotive industry[J].Materials Science and Engineering A,2000,280(3):37-49.
• [3]Lapovok R,Timokhina I,McKenzie P W J.Processing and properties of ultrafine-grain aluminium alloy 6111 sheet[J].Mater Process Technol,2008,200(1-3):441-450.
• [4]Raabe D,Sachtleber M.Grain-scale micromechanics of polycrystal surfaces during plastic straining[J].Acta Mater,2003,51:1536-1560.
• [5]Wu P D,Lloyd D J,Bosland A,et al.Analysis of roping in AA6111 automotive sheet[J].Acta Mater,2003,51:1945-1957.
• [6]Φrsund R,Nes E.Effect of particles on recrystallization textures in aluminum manganese alloys[J].Scripta Metallurgica,1988,22(5):665-669.
• [7]陈扬,赵刚,刘春明,等.6111铝合金板材固溶处理后的再结晶织构[J].中国有色金属学报,2006,16(2):333-338.CHENG Yang,ZHAO Gang,LIU Chun-ming,et al.Recrystallization texture in cold rolled sheet of Al alloy 6111 after solution treatment[J].TheChinese Journal of Nonferrous Metals,2006,16(2):333-338.
• [8]Troeger L P,Starke E A Jr.Particle-stimulated nucleation of recrystallization for grain-size control and super plasticity in an Al-Mg-Si-Cu alloy[J].Mater Sci Eng A,2000,293(1-2):19-29.
• [9]Engler O,Hirsch J.Texture control by thermomechanical processing of AA6xxx Al-Mg-Si sheet alloys for automotive applications-a review[J].MaterSci Eng A,2002,336(1-2):249-262.
• [10]陈扬,田妮,赵刚,等.预先热处理对6111铝合金冷轧及再结晶织构的影响[J].中国有色金属学报,2006,16(8):1411-1415.CHENG Yang,TIAN Ni,ZHAO Gang,et al.Effect of pre-heat treatments on cold rolling and recrystallization textures in Al alloy 6111[J].TheChinese Journal of Nonferrous Metals,2006,16(2):333-338.
• [11]陈扬,田妮,赵刚.形变量对6111铝合金再结晶织构的影响[J].轻合金加工技术,2006,34(5):24-27.CHEGN Yang,TIAN Ni,ZHAO Gang,et al.Effects of cold rolling reduction on recrystallization texture of 6111 aluminum alloy[J].Light AlloyFabrication Technology,2006,34(5):24-27.

文章评论(Comment)：