高飞,于德健,刘振宇,王国栋

• 1:东北大学轧制技术及连轧自动化国家重点实验室

摘要(Abstract)：

通过光学显微镜、X射线衍射及背散射电子衍射技术,研究了精轧温度,即高温精轧和低温精轧,对含Nb、B的超纯Cr17铁素体不锈钢薄板成形性及表面皱折的影响。结果表明:低温精轧有利于得到细小及均匀的冷轧退火组织。低温精轧有利于改善冷轧退火板织构的均匀性,促使冷轧退火板得到均匀、规则的γ纤维再结晶织构并形成更少的取向晶粒簇。因此,低温精轧是显著改善冷轧退火板成形性能及抗皱折性的有效工艺。

关键词(KeyWords)： 铁素体不锈钢;精轧温度;成形性能;表面皱折

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金和宝钢联合资质项目(50734002);; 国家自然科学基金青年基金(51004035)

作者(Author): 高飞,于德健,刘振宇,王国栋

DOI: 10.13289/j.issn.1009-6264.2011.08.018

参考文献(References)：

• [1]Yazawa Y,Ozaki Y,Kato Y.Development of ferritic stainless steel sheets with excellent deep drawability by｛111｝recrystallization texture control[J].JSAE Review,2003,24(4):483-488.
• [2]Liu H T,Liu Z Y,Wang G D.Texture development and formability of strip cast 17%Cr ferritic stainless steel[J].ISIJ International,2009,49(6):890-896.
• [3]Huh M Y,Lee J H,Park S H,et al.Effect of through-thickness macro and micro-texture gradients on ridging of 17%Cr ferritic stainless steel sheet[J].Steel Research International,2005,76(11):797-806.
• [4]刘海涛,张驰,郑淮北,等.热带退火对00Cr17Ti薄板成形性能的影响[J].钢铁,2009,44(4):68-71.LIU H T,ZHANG C,ZHENG H B,et al.Effect of annealing of hot-rolled band on the formability of 00Cr17Ti cold-rolled and annealed sheet[J].Ironand Steel,2009,44(4):68-71.
• [5]Barnett M R,Jonas J J.Influence of ferrite rolling temperature on microstructure and texture in deformed low C and IF steels[J].ISIJ International,1997,37(7):697-705.
• [6]Kang H G,Huh M Y,Park S H,et al.Effect of lubrication during hot on the evolution of through-thickness textures in 18%Cr ferritic stainless steelsheet[J].Steel Research International,2008,79(6):489-496.
• [7]刘海涛.Cr17铁素体不锈钢的组织、织构及成形性能研究[D].沈阳:东北大学,2009.
• [8]Barnett M R,Jonas J J.Influence of ferrite rolling temperature on grain size and texture in annealed low C and IF steels[J].ISIJ International,1997,37(7):706-714.
• [9]Huh M Y,Engler O.Effect of intermediate annealing on texture,formability and ridging of 17%Cr ferritic stainless steel sheet[J].Materials Scienceand Engineering A,2001,308(1-2):74-87.
• [10]Huh M Y,Cho Y S,Kim J S,et al.Effect of lubrication on the evolution of through-thickness texture gradients in cold rolled and recrystallized lowcarbon steel[J],Zeitschrift fur Metallkunde,1999,90(2):124-131.
• [11]Hutchinson W B,Recrystallization textures in iron resulting from nucleation at grain boundaries[J].Acta Metall,1989,37(4):1047-1056.
• [12]Tse Y Y,Liu G L,Duggan B J,Deformation banding and nucleation of recrystallization in IF steel[J].Scripta Mater,2000,42(1):25-30.
• [13]赵骧,史江,伊藤邦夫,等.高纯超低碳深冲钢板的固溶碳含量对再结晶γ织构的影响[J].金属学报,1995,31(6):B262-B265.ZHAO X,Ito K,Yoshinada N,et al.Influence of dissolved carbon content on recrystallizationγtexture in ultra-low carbon deep drawing steel with highpurity[J].Acta Metallrugica Sinica,1995,31(6):B262-B265.
• [14]武磊,刘雅政,程晓杰,等.退火温度制度对CSP流程冷轧深冲板性能和织构的影响[J],钢铁研究学报,2009,21(12):37-42.WU L,LIU Y Z,CHEN X J,et al.Influences of temperature system on cold rolled deep-drawing sheet produced by CSP process[J],Journal of Ironand Steel Research,2009,21(12):37-42.
• [15]于凤云,王轶农,蒋奇武.深冲IF钢再结晶｛111｝纤维织构形成机制探讨[J],材料科学与工艺,2008,16(5):724-727.YU F Y,WANG Y N,JIANG Q W.Formation mechanism of｛111｝recrystallization texture in IF steel[J],Materials Science and Technology,2008,16(5):724-727.
• [16]Shin H J,An J K,Park S H,et al.The effect of texture on ridging of ferritic stainless steel[J].Acta Materialia,2003,51(16):4693-4706.
• [17]Park S H,Kim K Y,Lee Y D,et al.Evolution of microstructure and texture associated with ridging in ferritic stainless steels[J].ISIJ International,2002,42(1):100-105.

文章评论(Comment)：