氮含量对022Cr25Ni7Mo3N双相不锈钢热加工行为的影响Effect of nitrogen content on hot working behavior of 022Cr25Ni7Mo3N duplex stainless steel
丰涵,宋志刚,何建国,李树健
摘要(Abstract):
通过热拉伸、热压缩试验研究了不同氮含量的022Cr25Ni7Mo3N双相不锈钢的热加工行为和软化机制。结果表明,试验钢高温抗拉强度随N含量增加而提高,该影响关系在较低变形温度区间尤为明显;在1100℃平面压缩达到稳态流变之后,试验钢的流变应力很快再次上升,出现二次硬化现象,N含量提高致使试验钢在更低的应变条件下更快地进入二次硬化阶段;试验钢高温变形过程中的应变主要传导到高温更软的铁素体相中,该相积蓄的较大应变能促进了铁素体的动态再结晶启动;022Cr25Ni7Mo3N双相不锈钢的软化机制主要是铁素体的动态回复和动态连续再结晶。
关键词(KeyWords): 热加工;双相不锈钢;动态再结晶;氮含量
基金项目(Foundation): 国家重点研发计划(2016YFB0300201)
作者(Author): 丰涵,宋志刚,何建国,李树健
DOI: 10.13289/j.issn.1009-6264.2019-0500
参考文献(References):
- [1] Dimitrov V I,Jekov K,Avinc A.Prediction of the solubility of nitrogen in steels obtained by pressurized electroslag remelting process[J].Computational Materials Science,1999,15:400-410.
- [2] Jiang Z H,Li H B,Chen Z P,et al.The nitrogen solubility in molten stainless steel[J].Steel Research International,2005,76(10):740-745.
- [3] Liu G,Li S L,Zhang H L,et al.Characterization of impact deformation behavior of a thermally aged duplex stainless steel by EBSD[J].Acta Metallurgica Sinica (English Letters),2018,31(8):798-806.
- [4] 丰涵,周晓玉,刘虎,等.特超级双相不锈钢的发展现状及趋势[J].钢铁研究学报,2015,27(4):4-8.FENG Han,ZHOU Xiao-yu,LIU Hu,et al.Development and trend of hyper duplex stainless steels[J].Journal of Iron and Steel Research,2015,27(4):4-8.
- [5] Hwang B,Lee T H,Park S J,et al.Correlation of austenite stability and ductile-to-brittle transition behavior of high-nitrogen 18Cr-10Mn austenitic steels[J].Materials Science and Engineering A,2011,528(24):7257-7266.
- [6] 徐文慧.不同含氮量奥氏体不锈钢低温力学性能和组织稳定性的研究[D].镇江:江苏大学,2016.XU Wen-hui.Study on low-temperature mechanical properties and microstructural stability of different nitrogen content of austenitic stainless steel[D].Zhenjiang:Jiangsu University,2016.
- [7] 朱岩.Ni、Mn、N对2507超级双相不锈钢组织和性能的影响[D].哈尔滨:哈尔滨理工大学,2014.ZHU Yan.Effects of Ni,Mn,N on microstructure and properties of 2507 super duplex stainless steel[D].Harbin:Harbin University of Science and Technology,2014.
- [8] 卢盼盼,王爱琴,谢敬佩,等.SAF2507超级双相不锈钢的进展[J].热处理,2015,30(6):9-13.LU Pan-pan,WANG Ai-qin,XIE Jing-pei,et al.Progress of SAF2507 super duplex stainless steel[J].Heat Treatment,2015,30(6):9-13.
- [9] 李树健,宋志刚,郑文杰,等.N对双相不锈钢00Cr25Ni7Mo3N组织、力学性能和耐点蚀性能的影响研究[J].材料导报,2011,25(17):520-522.LI Shu-jian,SONG Zhi-gang,ZHENG Wen-jie,et al.Influence of N on microstructure,mechanical property and pitting corrosion resistance of 00Cr25Ni7Mo3N[J].Materials Review,2011,25(17):520-522.
- [10] 向红亮,黄伟林,刘东,等.N含量对29Cr铸造超级双相不锈钢组织及性能的影响[J].金属学报,2010,46(3):50-56.XIANG Hong-liang,HUANG Wei-lin,LIU Dong,et al.Effects of N content on microstructure and properties of 29Cr casting super duplex stainless steel[J].Acta Metallurgica Sinica,2010,46(3):50-56.
- [11] Chao K L,Liao H Y,Shyue J J,et al.Corrosion behavior of high nitrogen nickel-free Fe-16Cr-Mn-Mo-N stainless steels[J].Metallurgical and Materials Transactions B,2013,45(2):381-391.
- [12] Jang M H,Moon J,Lee T H,et al.Effect of nitrogen partitioning on yield strength in nitrogen-alloyed duplex stainless steel during annealing[J].Metallurgical and Materials Transactions A,2014,45(4):1653-1658.
- [13] Triwiyanto A,Hussain P,Ismail M C.Behavior of carbon and nitrogen after low temperature thermochemical treatment on austenitic and duplex stainless steel[J].Applied Mechanics and Materials,2011,110-116:621-626.
- [14] 郎宇平,康喜范.超级高氮奥氏体不锈钢的耐腐蚀性能及氮的影响[J].钢铁研究学报,2001,13(1):30-35.LANG Yu-ping,KANG Xi-fan.Corrosion resistance of high nitrogen superaustenitic stainless steel and influence of nitrogen[J].Journal of Iron and Steel Research,2001,13(1):30-35.
- [15] 方远方.SAF2906双相不锈钢σ相析出规律与变形规律研究[D].北京:北京科技大学,2016.FANG Yuan-fang.Study on the σ-phase precipitation and deformation of SAF2906 duplex stainless steel[D].Beijing:University of Science and Technology Beijing,2016.
- [16] 王晓峰,陈伟庆,郑宏光.冷却速率对00Cr25Ni7Mo4N超级双相不锈钢析出相的影响[J].钢铁,2009,44(1):66-69.WANG Xiao-feng,CHEN Wei-qing,ZHENG Hong-guang.Influence of cooling rate on precipitated phase of super duplex stainless steel[J].Iron and Steel,2009,44(1):66-69.
- [17] 李静媛,杨智辉.超级双相不锈钢00Cr32Ni7Mo3.5N的热塑性及高温组织演变[J].锻压技术,2013,38(6):128-134.LI Jing-yuan,YANG Zhi-hui.Thermo-plasticity and high-temperature microstructure evolution of hyper duplex stainless steel 00Cr32Ni7Mo3.5N[J].Forging and Stamping Technology,2013,38(6):128-134.
- [18] 沈国雄,徐见平,吴汉民,等.022Cr25Ni7Mo4N的热穿孔和冷加工工艺[J].钢铁研究学报,2016,28(5):73-79.SHEN Guo-xiong,XU Jian-ping,WU Han-min,et al.Processes of hot piercing and cold working for 022Cr25Ni7Mo4N[J].Journal of Iron and Steel Research,2016,28(5):73-79.
- [19] 郭晓军.攀长钢公司超级双相不锈钢管材试制[J].特钢技术,2009,15(4):15-17,46.GUO Xiao-jun.Trial production of super duplex stainless steel tube S32750 in Changcheng Steel Company[J].Special Steel Technology,2009,15(4):15-17,46.
- [20] 俞树荣,孟恺,李淑欣.空气和腐蚀环境下双相不锈钢SAF2507的疲劳性能[J].材料工程,2015,43(1):77-81.YU Shu-rong,MENG Kai,LI Shu-xin.Fatigue properties of duplex stainless steel SAF2507 under air and corrosive environments[J].Journal of Materials Engineering,2015,43(1):77-81.
- [21] Momeni A,Dehghani K,Poletti M C.Law of mixture used to model the flow behavior of a duplex stainless steel at high temperatures[J].Materials Chemistry and Physics,2013,139(2/3):747-755.
- [22] Song Z G,Wu J,Lin X J,et al.Microstructure evolution and dynamic softening mechanism of 00Cr22Ni5Mo3N DSS during hot compression[J].Journal of Iron and Steel Research International,2011,18(7):60-68.
- [23] Moreno I,Almagro J F,Llovet X.Determination of nitrogen in duplex stainless steels by EPMA[J].Microchimica Acta,2002,139(1/4):105-110.
- [24] Momeni A,Kazemi S,Bahrani A.Hot deformation behavior of microstructural constituents in a duplex stainless steel during high-temperature straining[J].International Journal of Minerals,Metallurgy and Materials,2013,20(10):953-960.
- [25] Song Z G,Zheng W J,Feng H,et al.Hot ductility of DSS and its microstructure observation during hot deformation[J].Journal of Iron and Steel Research International,2013,20(8):83-86.
- [26] 贾如雷.超级双相不锈钢热变形行为及热加工工艺参数优化[D].上海:上海交通大学,2014.JIA Ru-lei.Study on the hot deformation behavior and hot working process optimization of super duplex stainless steel[D].Shanghai:Shanghai Jiao Tong University,2014.
- [27] 赵科巍.2205双相不锈钢的高温变形过程及其机理研究[D].兰州:兰州理工大学,2010.ZHAO Ke-wei.Study on hot deformation behavior of 00Cr22Ni5Mo3N duplex stainless steel[D].Lanzhou:Lanzhou University of Technology,2010.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||