杨奇,刘会群,檀雯,石卫民,郭建华,尹胜利,王鼎春

• 1:宝钛集团有限公司
• 2:中南大学材料科学与工程学院

摘要(Abstract)：

用XRD、TEM及硬度测试等方法研究了Ti7Nb10Mo合金在时效过程中的硬化行为。结果表明:随时效温度和时间的变化,合金展现出不同的硬化效应,300~450℃温度下时效,合金硬度出现双峰时效现象,且呈上升趋势,500~650℃温度下时效,合金的硬度达到峰值后一直下降,这主要是由于在固溶态β+少量ω相基体中不断析出α和α″相,且在时效过程中ω相不断析出及分解。

关键词(KeyWords)： β类钛合金;固溶时效;时效硬化

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 杨奇,刘会群,檀雯,石卫民,郭建华,尹胜利,王鼎春

DOI: 10.13289/j.issn.1009-6264.2017-0416

参考文献(References)：

• [1]黄伯云,李成功.中国材料工程大典第4卷有色金属材料工程(上)[M].北京:化学工业出版社,2005.
• [2]王金友,葛志明,周彦邦.航空用钛合金[M].上海:上海科学技术出版社,1985.
• [3]Li Y,Yang C,Zhao H,et al.New developments of Ti-based alloys for biomedical applications[J].Materials,2014,7(3):1709.
• [4]Assis S L,Costa I.Electrochemical evaluation of Ti-13Nb-13Zr,Ti-6Al-4V and Ti-6Al-7Nb alloys for biomedical application by long-term immersion tests[J].Materials&Corrosion,2015,58(5):329-333.
• [5]Lin D J,Lin J H,Ju C P,et al.Structure and properties of Ti-7.5Mo-x Fe alloys[J].Biomaterials,2002,23(8):1723-30.
• [6]Ninomi M,Kuroda D,Fukunaga K,et al.Corrosion wear fracture of newβtype biomedical titanium alloys[J].Materials Science and Engineering A,1999,263:193-199.
• [7]Nnamchi P S,Obayi C S,Todd I,et al.Mechanical and electrochemical characterisation of new Ti-Mo-Nb-Zr alloys for biomedical applications[J].Journal of the Mechanical Behavior of Biomedical Materials,2016,60:68-77.
• [8]Wang P,Feng Y,Liu F,et al.Microstructure and mechanical properties of Ti-Zr-Cr biomedical alloys[J].Materials Science&Engineering C Materials for Biological Applications,2015,51(11):148.
• [9]许艳飞,王章,肖逸锋,等.低温轧制对生物医用Ti-25Nb-10Ta-1Zr-0.2Fe合金组织和性能的影响[J].材料热处理学报,2017,38(8):14-20.XU Yan-fei,WANG Zhang,XIAO Yi-feng,et al.Effects of low temperature rolling on microstructure and mechanical properties of biomedical Ti-25Nb-10Ta-1Zr-0.2Fe alloy[J].Transactions of Materials and Heat Treatment,2017,38(8):14-20.
• [10]Akahori T,Niinomi M,Noda A,et al.Effect of aging treatment on mechanical properties of Ti-29Nb-13Ta-4.6Zr alloy for biomedical applications[J].Journal of the Japan Institute of Metals,2006,70:295-303.
• [11]Wan W F,Liu H Q,Jiang Y,et al.Microstructure characterization and property tailoring of a biomedical Ti-19Nb-1.5Mo-4Zr-8Sn alloy[J].Materials Science&Engineering A,2015,637:130-138.
• [12]Mantani Y,Tajima M.Phase transformation of quenchedα″martensite by aging in Ti-Nb alloys[J].Materials Science and Engineering A,2006,438-440:315-319.
• [13]常辉,曾卫东,罗媛媛,等.近β型钛合金Ti-B19时效过程中的相变及显微组织[J].稀有金属材料与工程,2006,(10):1589-1592.CANG Hui,ZENG Wei-dong,LUO Yuan-yuan,et al.Phase Transformation and microstructure evolution in nearβTi-B19 titanium alloy during aging treatment[J].Rare Metal Materials and Engineering,2006,(10):1589-1592.
• [14]Morinaga M,Kato M,Kamimura T,et al.Theoretical design ofβ-type titanium alloys[C]∥Titanium 1992’,Science and Technology,Proc.7th Int.Conf.on Titanium,San Diego,CA,USA,1992:276-283.
• [15]Karre R,Niranjan M K,Dey S R.First principles theoretical investigations of low Young's modulus beta Ti-Nb and Ti-Nb-Zr alloys compositions for biomedical applications[J].Materials Science&Engineering C,2015,50:52-58.

文章评论(Comment)：