牟赛杰,周香林,巫湘坤,王建国,张济山

• 1:北京科技大学新金属材料国家重点实验室

摘要(Abstract)：

利用非线性有限元软件ANSYS/LS-DYNA对Zr41.2Ti13.8Cu12.5Ni10Be22.5非晶合金颗粒在几种撞击条件下的破碎行为进行了模拟研究,计算了颗粒失效破碎的临界速度,为非晶合金气流粉碎工艺提供参考。结果表明,尺寸20μm的颗粒撞击碳化硅基板与撞击钢基板时所需的破碎速度接近,但前者颗粒只在其接触区域附近发生少量局部破碎,后者颗粒沿撞击轴向断裂。尺寸20μm的颗粒之间碰撞时所需的相对破碎速度约为341 m/s;被撞颗粒尺寸固定时,临界破碎速度随撞击颗粒尺寸增加先增加,在两颗粒尺寸相同时达到最大值,然后再减小;尺寸不同的两个颗粒撞击时小颗粒破碎比大颗粒严重;颗粒之间撞击破碎效果又好于颗粒与基板撞击。

关键词(KeyWords)： 非晶合金颗粒;高速撞击;破碎行为;模拟

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(50871019)

作者(Author): 牟赛杰,周香林,巫湘坤,王建国,张济山

DOI: 10.13289/j.issn.1009-6264.2011.02.028

参考文献(References)：

• [1]蔡艳华,马冬梅,彭汝芳,等.超音速气流粉碎技术应用研究新进展[J].化工进展,2008,27(5):671-674.CAI Yan-hua,MA Dong-mei,PENG Ru-fang,et al.New research progress of supersonic speed airflow grinding technology[J].Chemical Industryand Engineering Progress,2008,27(5):671-674.
• [2]言仿雷.超微气流粉碎技术[J].材料科学与程,2000,18(4):145-149.YAN Fang-lei.Ultramicro air flow Grind technology[J].Materials Science and Engineering,2000,18(4):145-149.
• [3]周香林,张济山,樊建中,等.球磨纳米NiCr/WC复合粉的微观组织[J].材料热处理学报,2006,27(6):21-25.ZHOU Xiang-lin,ZHANG Ji-shan,FAN Jian-zhong,et al.Microstructure of NiCr/WC nanocrystaline coating material prepared by ball-millingtechnology[J].Transactions of Materials and Heat Treatment,2006,27(6):21-25.
• [4]Wang W H,Dong C,Shek C H.Bulk metallic glasses[J].Materials Science and Engineering R,2004,44(2-3):45-89.
• [5]Sanghoon Yoon,Hyung Jun Kim,Changhee Lee.Deposition behavior of bulk amorphous NiTiZrSiSn according to the kinetic and thermal energylevels in the kinetic spraying process[J].Surface and Coatings Technology,2006,200:6022-6029.
• [6]Yoo Y H,Lee S H,Kim J G.Effect of heat treatment on the corrosion resistance of Ni-based and Cu-based amorphous alloy coatings[J].Alloys andCompounds,2008,461:304-311.
• [7]杨云川,李国康.气流磨粉碎机理分析[J].中国粉体技术,2002,8(S):194-196.YANG Yun-chuan,LI Guo-kang.Analysis of gas flow mill crushing principles[J].China Powder Science and Technology,2002,8(S):194-196.
• [8]Cronin D S,Khahn B,Christian K,et al.Implementation and validation of the Johnson-holmquist ceramic material model in LS-Dyna[A].Proceedings of the 4th European LS-Dyna Users Conference[C]//Ulm,Germany,2003:D-I 47-60.
• [9]Brvik T,Hopperstad O S,Berstad T,et al.A computational model of viscoplasticity and ductile damage for impact and penetration[J].EuropeanJournal of Mechanics-A/Solids,2001,20:685-712.
• [10]Hamid Assadi,Frank Gartner,Thorsten Stoltenhoff,et al.Bonding mechanism in cold gas spraying[J].Acta Materialia,2003,51:4379-4394.

文章评论(Comment)：