刘洁,李睿,范光伟,李国平,崔卫则,王一鸣

• 1:太原科技大学材料科学与工程学院
• 2:晋西车轴股份有限公司
• 3:太原钢铁(集团)有限公司技术中心

摘要(Abstract)：

采用Gleeble 3800热力模拟机对超级双相不锈钢SAF2507焊接热影响区组织进行模拟,研究了不同热输入条件下焊接热影响区显微组织和合金元素含量的变化,通过电化学循环伏安法评价了该组织的耐蚀性。研究结果表明,热输入由0.807 k J/mm增加至2.552 k J/mm时,模拟热影响区上奥氏体以晶内奥氏体、晶界奥氏体和魏氏奥氏体3种形貌析出,含量由40%增加到52%。各个热输入时奥氏体的PRE值均大于铁素体的PRE值,因此奥氏体含量的增加使热影响区组织的点蚀电位从1030 m V提高至1082 m V。但是继续增加热输入至2.965 k J/mm时,在两相交界处观察到有粒状的χ相析出。虽然该组织上奥氏体含量仍有增加,但是χ相的析出却导致组织的点蚀电位降至1065 m V。

关键词(KeyWords)： 超级双相不锈钢;热模拟;相比例;析出相;耐蚀性

Abstract:

Keywords:

基金项目(Foundation): 国家高技术研究发展计划(2015AA034301);; 山西省基础研究重点项目(2014011002-3);; 国家科技支撑计划(2012BAE04B01);; 校博士科研启动项目(20132008)

作者(Author): 刘洁,李睿,范光伟,李国平,崔卫则,王一鸣

DOI: 10.13289/j.issn.1009-6264.2015.10.013

参考文献(References)：

• [1]Wan J,Ran Q,Li J,et al.A new resource-saving,low chromium and low nickel duplex stainless steel 15Cr-x Al-2Ni-y Mn[J].Materials&Design,2014,53:43-50.
• [2]宾远红,李培芬,李志铮,等.不同固溶温度对双相不锈钢σ相析出及冲击韧性的影响[J].材料热处理学报,2013,34(8):136-141.BIN Yuan-hong,LI Pei-fen,LI Zhi-zheng,et al.Precipitation ofσ-phase and its effect on impact toughness of a duplex stainless steel solution-treated at different temperatures[J].Transactions of Materials and Heat Treatment,2013,34(8):136-141.
• [3]黄伟林,向红亮,陈彤,等.时效时间对2906超级双相不锈钢组织及性能的影响[J].材料热处理学报,2013,34(12):120-124.HUANG Wei-lin,XIANG Hong-liang,CHEN Tong,et al.Effects of aging time on microstructure and properties of 2906 super duplex stainless steel[J].Transactions of Materials and Heat Treatment,2013,34(12):120-124.
• [4]Luo H,Dong C F,Xiao K,et al.Characterization of passive film on 2205 duplex stainless steel in sodium thiosulphate solution[J].Applied Surface Science,2011,258(1):631-639.
• [5]Ebrahimi N,Momeni M,Moayed M H,et al.Correlation between critical pitting temperature and degree of sensitisation on alloy 2205 duplex stainless steel[J].Corrosion Science,2011,53(2):637-644.
• [6]向红亮,黄伟林,刘东,等.铸造SAF2906不锈钢在人工海水中的电化学阻抗谱[J].材料热处理学报,2013,34(1):81-85.XIANG Hong-liang,HUANG Wei-lin,LIU Dong,et al.EIS characteristics of cast SAF2906 stainless steel in artificial brine solution[J].Transactions of Materials and Heat Treatment,2013,34(1):81-85.
• [7]Muthupandi V,Bala Srinivasan P,Seshadri S K,et al.Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds[J].Materials Science and Engineering A,2003,358(1):9-16.
• [8]Yong T S,Shin H S,Lee H W.Effects of heat input on pitting corrosion in super duplex stainless steel weld metals[J].Metals and Materials International,2012,18(6):1037-1040.
• [9]Jiang Y,Tan H,Wang Z,et al.Influence of Creq/Nieq on pitting corrosion resistance and mechanical properties of UNS S32304 duplex stainless steel welded joints[J].Corrosion Science,2013:252-259.
• [10]Yousefieh M,Shamanian M,Saatchi A.Influence of heat input in pulsed current GTAW process on microstructure and corrosion resistance of duplex stainless steel welds[J].Journal of Iron and Steel Research,International,2011,18(9):65-69.
• [11]Kim S T,Lee I S,Kim J S,et al.Investigation of the localized corrosion associated with phase transformation of tube-to-tube sheet welds of hyper duplex stainless steel in acidified chloride environments[J].Corrosion Science,2012,64:164-173.
• [12]Liou H Y,Hsieh R I,Tsai W T.Microstructure and pitting corrosion in simulated heat-affected zones of duplex stainless steels[J].Materials Chemistry and Physics,2002,74(1):33-42.
• [13]Liou H Y,Hsieh R I,Tsai W T.Microstructure and stress corrosion cracking in simulated heat-affected zones of duplex stainless steels[J].Corrosion Science,2002,44(12):2841-2856.
• [14]Hsieh R I,Liou H Y,Pan Y T.Effects of cooling time and alloying elements on the microstructure of the gleeble-simulated heat-affected zone of 22%Cr duplex stainless steels[J].Journal of Materials Engineering and Performance,2001,10(5):526-536.
• [15]Chen L,Tan H,Wang Z,et al.Influence of cooling rate on microstructure evolution and pitting corrosion resistance in the simulated heat-affected zone of 2304 duplex stainless steels[J].Corrosion Science,2012,58:168-174.
• [16]Yang Y,Yan B,Li J,et al.The effect of large heat input on the microstructure and corrosion behaviour of simulated heat affected zone in 2205 duplex stainless steel[J].Corrosion Science,2011,53(11):3756-3763.
• [17]Garzón C M,Serna C A,Brandi S D,et al.The relationship between atomic partitioning and corrosion resistance in the weld-heat affected zone microstructures of UNS S32304 duplex stainless steel[J].Journal of Materials Science,2007,42(21):9021-9029.
• [18]Kivineva E,Zhou Z,Hannerz N E.Grain growth with simulated weld cycles as studied on structural QT steel,on duplex stainless steel and on Ti 6 Al4 V[J].International Journal for the Joining of Materials(Denmark),2001,13(4):91-96.
• [19]ASTM E562-08.Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count[S].2008.
• [20]ASTM G61-86(2009).Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-,Nickel-,or Cobalt-Based Alloys[S].2009.
• [21]Hertzman S,Brolund B,Ferreira P J.An experimental and theoretical study of heat-affected zone austenite reformation in three duplex stainless steels.Metallurgical and Materials Transactions A,1997,28(2):277-285.
• [22]Liao J.Nitride precipitation in weld HAZs of a duplex stainless steel[J].ISIJ International,2001,41(5):460-467.
• [23]Chen T H,Yang J R.Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel[J].Materials Science and Engineering A,2002,338(1):166-181.
• [24]Calliari I,Pellizzari M,Zanellato M,et al.The phase stability in Cr-Ni and Cr-Mn duplex stainless steels[J].Journal of Materials Science,2011,46(21):6916-6924.
• [25]Yang Y,Wang Z,Tan H,et al.Effect of a brief post-weld heat treatment on the microstructure evolution and pitting corrosion of laser beam welded UNS S31803 duplex stainless steel[J].Corrosion Science,2012,65:472-480.
• [26]Cervo R,Ferro P,Tiziani A,et al.Annealing temperature effects on super duplex stainless steel UNS S32750 welded joints.Ⅱ:pitting corrosion resistance evaluation[J].Journal of Materials Science,2010,45(16):4378-4389.

文章评论(Comment)：