韩玮,孟宪明,赵杰,张俊宝

• 1:大连理工大学材料科学与工程学院
• 2:宝山钢铁股份有限公司研究院前沿技术研究所

摘要(Abstract)：

采用光学显微镜、电子探针、三点弯曲试验和冷喷涂单边涂层弹性模量理论模型等方法,研究了真空热处理对冷喷涂304不锈钢涂层弹性模量的影响。结果表明:在热处理过程中,304不锈钢涂层内部的金属原子发生扩散、局部粒子界面发生融合,使粒子间结合力和涂层力学性能得以改善;同时涂层中的氧元素也发生扩散形成团聚体,分布于粒子边界处,使得涂层的弹性模量降低。热处理温度低于500℃时,304不锈钢涂层的弹性模量和等效抗弯刚度变化不大,与冷喷态涂层相当;当热处理温度超过500℃后,304不锈钢涂层的弹性模量和等效抗弯刚度随着热处理温度的升高迅速降低;在热处理温度相同的情况下,304不锈钢涂层的弹性模量和等效抗弯刚度随着热处理时间的增加而降低。

关键词(KeyWords)： 冷喷涂304不锈钢涂层;弹性模量;真空热处理;三点弯曲

Abstract:

Keywords:

基金项目(Foundation): 中央高校基本科研业务费专项资金(DUT10JS06)

作者(Author): 韩玮,孟宪明,赵杰,张俊宝

DOI: 10.13289/j.issn.1009-6264.2011.08.028

参考文献(References)：

• [1]李长久.中国冷喷涂研究进展[J].中国表面工程,2009,22(4):5-14.Li Chang-jiu.The state-of-art of research and development on cold spraying in China[J].China Surface Engineering,2009,22(4):5-14.
• [2]Alkimov A P,Kosarev V F,Papyrin A N.A method of cold gas dynamic deposition[J].Doklady Akademii Nauk SSSR,1990,315(4-6):1062-1065.
• [3]Gilmore D L,Dykhuizen R C,Neiser R A,et al.Particle velocity and deposition efficiency in the cold spray process[J].Journal of Thermal SprayTechnology,1999,8(4):576-582.
• [4]Kim H J,Lee C H,Hwang S Y.Super hard nano WC-12%Co coating by cold spray deposition[J].Materials Science and Engineering A,2005,391:243-248.
• [5]Li C J,Li W Y,Wang Y Y.Formation of metastable phases in cold-sprayed soft metallic deposit[J].Surface and Coatings Technology,2005,198(1-3):469-473.
• [6]Li C J,Li W Y.Deposition characteristics of titanium coating in cold spraying[J].Surface and Coatings Technology,2003,167(2-3):278-283.
• [7]Ajdelsztajn L,Zuniga A,Jodoin B,et al.Cold gas dynamic spraying of a high temperature Al alloy[J].Surface and Coatings Technology,2006,201(6):2109-2116.
• [8]Lima R S,Karthikeyan J,Kay C M,et al.Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings[J].Thin Solid Films,2002,416(1-2):129-135.
• [9]Kim H J,Lee C H,Hwang S Y.Fabrication of WC-Co coatings by cold spray deposition[J].Surface and Coatings Technology,2005,191(2-3):335-340.
• [10]程应科,张建军,徐连勇.涂层弹性模量的测量方法[J].中国科技论文在线,2008,3(4):293-298.Cheng Ying-ke,Zhang Jian-jun,Xu Lian-yong.Investigation on measuring the elastic modulus of coatings[J].Sciencepaper Online,2008,3(4):293-298.
• [11]Stoltenhoff T,Borchers C,Grtner F,et al.Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings[J].Surfaceand Coatings Technology,2006,200(16-17):4947-4960.
• [12]Grtner F,Stoltenhoff T,Voyer J,et al.Mechanical properties of cold-sprayed and thermally sprayed coatings[J].Surface and CoatingsTechnology,2006,200(24):6770-6782.
• [13]袁晓光,刘彦学,王怡嵩,等.镁合金表面冷喷涂铝合金的界面扩散行为[J].焊接学报,2007,28(11):9-12.Yuan Xiao-guang,Liu Yan-xue,Wang Yi-song,et al.Influence of heat treatment on interfacial diffusion of Al alloy cold spraying coating onmagnesium alloy[J].Transactions of the China Welding Institution,2007,28(11):9-12.
• [14]王佳杰,王志平,霍树斌,等.超音速冷喷涂铜涂层特性分析[J].焊接学报,2007,28(4):77-80.Wang Jia-jie,Wang Zhi-ping,Huo Shu-bin,et al.Properties of Cu coating in supersonic cold gas dynamic spraying[J].Transactions of the ChinaWelding Institution,2007,28(4):77-80.
• [15]Spencer K,Zhang M X.The use of kinetic metallization to form intermetallic reinforced composite coatings by post-spray heat treatment[J].Surfaceand Coatings Technology,2009,203(20-21):3019-3025.
• [16]Assadi H,Grtner F,Stoltenhoff T,et al.Bonding mechanism in cold gas spraying[J].Acta Materialia,2003,51(15):4379-4394.

文章评论(Comment)：