耿京京,于浩,范勇斐

• 1:北京科技大学材料加工与控制工程系

摘要(Abstract)：

为研究常化温度对热轧无取向硅钢组织与织构的影响,采用光学显微镜、背电子散射衍射技术研究了不同常化温度对其影响。结果表明,实验硅钢板在700～850℃温度下常化时,随常化温度的升高,晶粒尺寸增大,有利组分α织构增强,不利组分γ织构降低。对比研究了800℃和850℃常化热轧板CSL晶界分布图与取向差分布图,在本文研究条件下,Goss织构易在Σ=3,9的CSL晶界及晶粒取向差为30°～55°处形成。

关键词(KeyWords)： 常化;无取向硅钢;晶粒尺寸;织构;CSL晶界;取向差

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 耿京京,于浩,范勇斐

DOI: 10.13289/j.issn.1009-6264.2013.s1.021

参考文献(References)：

• [1]Prem Kumar R,Samajdar I,Viswanathan N N,et al.Relative effect(s)of texture and grain size on magnetic properties in a low silicon non-grainoriented electrical steel[J].Journal of Magnetism and Magnetic Materials,2003,264(1):75-85.
• [2]张正贵,祝晓波,刘沿东,等.无取向硅钢热轧板织构[J].钢铁,2007,42(6):74-77.ZHANG Zheng-gui,ZHU Xiao-bo,LIU Yan,et al.Study on texture of non-oriented hot-rolled electrical steel[J].Iron and Steel,2007,42(6):74-77.
• [3]何忠志.电工钢[M].北京:冶金工业出版社,1996:286-288.
• [4]董浩,赵宇,喻晓军,等.常化温度对冷轧无取向硅钢薄带磁性能和织构的影响[J].钢铁研究学报,2008,20(5):45-51.DONG Hao,ZHAO Yu,YU Xiao-jun,et al.Effect of normalizing temperature on magnetic properties and texture of thin non-oriented electrical steelsheets[J].Journal of Iron and Steel Research,2008,20(5):45-51
• [5]Chang S K.Texture change from primary to secondary recrystallization by hot-band normalizing in grain-oriented silicon steels[J].Materials Scienceand Engineering,2007,452-453:93-98.
• [6]Rubens Takanohashi,Fernando Jose,Gomes Landgraf.Effect of hot-band grain size and intermediate annealing on magnetic properties and texture ofnon-oriented silicon steels[J].Journal of Magnetism and Magnetic Materials,2006,304(2):608e610.
• [7]毛卫民,赵新兵.金属的再结晶与晶粒长大[M].北京:冶金工业出版社,1994:279-291.

文章评论(Comment)：