孙昊,任慧平,金自力,王海燕,计云萍,王玉峰,李德刚,田荣彬

• 1:内蒙古科技大学材料与冶金学院
• 2:包头钢铁集团公司薄板坯连铸连轧厂

摘要(Abstract)：

采用紧凑式热带生产工艺(CSP)热轧板为原料生产冷轧钢板,对该热轧板及其冷轧钢板生成过程中各段进行了扫描电镜和金相显微镜的观察,研究了材料组织的演变,并对冷硬板及其退火后冷轧板做了化学相分析。结果表明:CSP热轧板组织中有少量的珠光体和夹杂物,随后的冷轧及退火过程对珠光体和夹杂物的影响较小,退火后的冷轧板最终组织呈分布均匀的长饼状铁素体晶粒。化学相分析表明,冷轧后退火过程中Fe3C的析出量有增加和聚集粗化的现象发生。

关键词(KeyWords)： 冷轧;退火;铁素体;珠光体;夹杂物

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助(50761005)

作者(Author): 孙昊,任慧平,金自力,王海燕,计云萍,王玉峰,李德刚,田荣彬

参考文献(References)：

• [1]康永林,傅杰,柳得橹,等.薄板坯连铸连轧钢的组织与性能控制[M].北京:冶金工业出版社,2006.
• [2]田乃媛.薄板坯连铸连轧[M].第2版.北京:冶金工业出版社,2004.
• [3]Reip C P,Shanmugam S,Misra R D K.High strength microalloyed CMn(V-Nb-Ti)and CMn(V-Nb)pipeline steels processed through CSP thin-slabtechnology:Microstructure,precipitation and mechanical properties[J].Materials Science and Engineering A,2006,424(1-2):307-317.
• [4]Sun Ying,Li Jun,Zhao Yu,et al.Influence of heat treatment on magnetic properties of non-oriented electrical steel prepared by CSP process simulated[J].Journal of Iron and Steel Research(International),2007,14(5):216-219.
• [5]Yu Hao,Kang Yong-lin,Dong Hong-bo.Comparison and analysis of dislocation density,morphology and evolution in microstructure of low-carbon steelproduced using different technologies[J].Journal of University of Science and Technology Beijing,2006,13(5):406-410.
• [6]Bai Ming-zhuo,Liu De-lu,Lou Yan-zhi,et al.Effects of Ti addition on low carbon hot strips produced by CSP process[J].Journal of University of Scienceand Technology Beijing,2006,13(3):230-234.
• [7]王新华.采用薄板坯连铸生产高表面质量冷轧钢板的可行性分析[J].钢铁,2004,39(12):18-25.Wang Xin-hua.Possibility of producing high quality cold rolled coils with thin slab casting production route[J].Iron and Steel,2004,39(12):18-25.
• [8]董梅,吴文林,徐光元,等.应用CSP热轧卷生产的冷轧与镀锌产品常见缺陷分析[J].钢铁,2006,41(7):65-68.DONG Mei,WU Wen-lin,XU Guang-yuan,et al.Defect analysis of cold rolled and hot dip galvanized products produced from CSP coils[J].Iron and Steel,2006,41(7):65-68.
• [9]LIU De-lu,FU Jie,Kang Yong-lin,et al.Oxide and sulfide dispersive precipitation and effects on microstructure and properties of low carbon steels[J].Journal of Materials Science&Technology,2002,18(1):7-9.
• [10]Kang Yong-lin,Yu Hao,Fu Jie,et al.Morphology and precipitation kinetics of AlN in hot strip of low carbon steel produced by compact strip production[J].Materials Science and Engineering A,2003,351(1-2):265-271.

文章评论(Comment)：