刘大海,宗崇文,黎俊初,曾龙飞

• 1:南昌航空大学航空制造工程学院

摘要(Abstract)：

为减弱或消除搅拌摩擦焊工艺(FSW)对时效成形的不利影响,改善2A12铝合金FSW构件的时效成形后的综合性能,通过设计不同的预热处理和时效成形组合工艺,试验研究热处理对2A12铝合金FSW构件时效成形组织和性能的影响。结果表明,在其他条件相同的情况下,预热处理(退火+固溶处理)可有效改善FSW构件的时效成形性。与单一时效成形过程相比,退火+固溶+时效成形组合工艺下,焊接构件的回弹率降低,抗拉强度和焊缝硬度显著提高,且预热处理的存在使得焊缝区域组织得到一定程度的细化和均匀化。经退火+固溶+时效成形的焊件,回弹率可达17.98%;抗拉强度可达394 MPa,为母材的89.5%。

关键词(KeyWords)： 铝合金;时效成形;搅拌摩擦焊(FSW);退火处理;固溶处理

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51375220);; 江西省自然科学基金(20142BAB216023)

作者(Author): 刘大海,宗崇文,黎俊初,曾龙飞

DOI: 10.13289/j.issn.1009-6264.2015.06.015

参考文献(References)：

• [1]Heinz A,Haszler A,Keidel C,et al.Recent development in aluminum alloys for aerospace applications[J].Materials Science and Engineering A,2000,280(1):102-107.
• [2]Williams J C,Starke E A.Progress in structural materials for aerospace systems[J].Acta Materialia,2003,51(19):5775-5799.
• [3]曾元松,黄遐.大型整体壁板成形技术[J].航空学报,2008,29(3):721-727.ZENG Yuan-song,HUANG Xia.Forming technologies of large integral panel[J].Acta Aeronautica et Astronautica Sinica,2008,29(3):721-727.
• [4]王俊彪,刘中凯,张贤杰.大型机翼整体壁板时效成形技术[J].航空学报,2008,29(3):728-733.WANG Jun-biao,LIU Zhong-kai,ZHANG Xian-jie.Age forming of large scale integral aircraft wing panel[J].Aeronautica et Astronautica Sinica,2008,29(3):728-733.
• [5]Holman M C.Autoclave age forming large aluminum aircraft panels[J].Journal of Mechanical Working Technology,1989,20:477-488.
• [6]Adachi T,Kimura S,Nagayama T,et al.Age forming technology for aircraft wing skin[J].Materials Form,2004,28:202-207.
• [7]Eberl F,Gardiner S,Campanile G,et al.Ageformable panels for commercial aircraft[J].Proceedings of the Institution of Mechanical Engineers,Part G:Journal of Aerospace Engineering,2008,222(6):873-886.
• [8]Brewer H M,Holman M C.Method of tool development:USA,5168169[P].1992.
• [9]Zhan L H,Lin J G,Dean T A.A review of the development of creep age forming:Experimentation,modeling and applications[J].International Journal of Machine Tools and Manufacture,2011,51(1):1-17.
• [10]Watcham K.Airbus A380 takes creep age-forming to new heights[J].Materials World,2004,12(2):10-11.
• [11]韩志仁,张凌云,祁桂根.飞机大型蒙皮制造技术现状分析[C]//大型飞机关键技术高层论坛暨中国航空学会2007年学术年会论文集,2007.
• [12]黎俊初,周德生,刘大海,等.2A12铝合金筋板件T型搅拌摩擦焊工艺及焊后热处理[J].材料科学与工艺,2011,19(2):80-85.LI Jun-chu,ZHOU De-sheng,LIU Da-hai,et al.Friction stir welding and successive heat treatment of T-shaped rib-web parts of 2A12 aluminum alloy[J].Materials Science and Technology,2011,19(2):80-85.
• [13]黎俊初,黎文欢,刘大海,等.2A12铝合金FSW板材时效成形性研究[J].材料热处理学报,2012,33(8):100-104LI Jun-chu,LI Wen-huan,LIU Da-hai,et al.Creep age forming formability of friction stir welded 2A12 aluminum alloy panels[J].Transactions of Materials and Heat Treatment,2012,33(8):100-104.
• [14]刘大海,黎俊初,熊洪淼,等.2A12铝合金筋板件搅拌摩擦焊工艺及焊后时效成形[J].材料热处理学报,2013,34(2):126-132.LIU Da-hai,LI Jun-chu,XIONG Hong-miao,et al.Friction stir welding of 2A12 aluminum rib-web parts and creep age forming after welding[J].Transactions of Materials and Heat Treatment,2013,34(2):126-132.
• [15]王姗姗.2A23铝合金时效成形工艺及组织性能研究[D].哈尔滨:哈尔滨工业大学,2010.
• [16]Jeshvaghani R A,Emami M,Shahverdi H R,et al.Effects of time and temperature on the creep forming of 7075 aluminum alloy:Springback and mechanical properties[J].Materials Science and Engineering A,2011,528:8795-8799.
• [17]Lin Y C,Xia Y C,Jiang Y Q,et al.Precipitation hardening of 2024-T3 aluminum alloy during creep aging[J].Materials Science and Engineering A,2013,565:420-429

文章评论(Comment)：