杨凯,黄洁雯,樊新民,熊党生

• 1:南京理工大学材料科学与工程学院

摘要(Abstract)：

利用阴极等离子电解沉积技术(CPED)在Ti6Al4V表面制备了Al2O3/Mo S2减磨耐蚀复合涂层。利用XRD、SEM、EDS等检测手段分析了复合涂层的形貌、物相及元素分布。结果表明,涂层表面呈多孔状,厚度为100μm,由α-Al2O3、γ-Al2O3与Mo S23相组成。涂层与基体结合强度达35 N。与Ti6Al4V相比,该涂层的摩擦系数降低了1/3,腐蚀电位显著提高,腐蚀电流密度下降,有效减缓了基体的腐蚀速率。

关键词(KeyWords)： 阴极等离子电解沉积;氧化铝;二硫化钼;复合涂层;摩擦学性能;耐蚀性

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金青年基金(51401108)

作者(Author): 杨凯,黄洁雯,樊新民,熊党生

DOI: 10.13289/j.issn.1009-6264.2016.02.028

参考文献(References)：

• [1]Xu P,Lin C X,Zhou C Y.Wear and corrosion resistance of laser cladding AISI 304 stainless steel/Al2O3composite coatings[J].Surface and Coatings Technology,2014,238(15):9-14.
• [2]Tiwari S K,Sahu R K,Pramanick A K,et al.Development of conversion coating on mild steel prior to sol gel nanostructured Al2O3coating for enhancement of corrosion resistance[J].Surface and Coatings Technology,2011,205(21/22):4960-4967.
• [3]王志义,管相杰.电泳沉积氧化铝陶瓷涂层的制备及耐腐蚀性能[J].电镀与涂饰,2007,26(9):1-4.WANG Zhi-yi,GUAN Xiang-jie.Preparation and corrosion resistance of electrophoretically-deposited Al2O3ceramic coating[J].Electroplating and Finishing,2007,26(9):1-4.
• [4]毛杰,邓春明,邝子奇,等.超音速等离子喷涂Al2O3涂层制备及工艺优化[J].材料热处理学报,2015,36(1):143-146.MAO Jie,DENG Chun-ming,KUANG Zi-qi,et al.Preparation and process optimization of Al2O3coatings deposited by supersonic plasma spraying technique[J].Transactions of Materials and Heat Treatment,2015,36(1):143-146.
• [5]赵广宏,何业东.镀液成分对等离子电沉积镍镀层的影响[J].材料热处理学报,2012,33(9):95-100.ZHAO Guang-hong,HE Ye-dong.Effects of composition in plating solution on Ni coatings prepared by plasma electrodeposition[J].Transactions of Materials and Heat Treatment,2012,33(9):95-100.
• [6]赵广宏,何业东.脉冲参数对等离子电沉积镍镀层结构和性能的影响[J].材料热处理学报,2012,33(8):115-120.ZHAO Guang-hong,HE Ye-dong.Influences of pulse parameters on microstructure and properties of Ni-coatings prepared by plasma electrodeposition[J].Transactions of Materials and Heat Treatment,2012,33(8):115-120.
• [7]杨建明,马超,陈劲松,等.乙醇环境下阴极等离子体电解沉积镍[J].有色金属工程,2014,4(3):41-44.YANG Jian-ming,MA Chao,CHEN Jin-song,et al.Deposition of Ni coating by cathodic plasm electrolysis in ethanol environment[J].Nonferous Materals Engineering,2014,4(3):41-44.
• [8]Zong C Y,Li H D,Li C.Cathodic plasma electrolysis in 1-propanol solutions for preparation of submicron diamond particles[J].Electrochimica Acta,2013,105:612-617.
• [9]Wu J,Xue W B,Wang B.Characterization of carburized layer on T8 steel fabricated by cathodic plasma electrolysis[J].Surface&Coatings Technology,2014,245:9-15.
• [10]Aliofkhazraei M,Sabour Rouhaghdam A.Fabrication of Ti C/WC ultra hard nanocomposite layers by plasma electrolysis and study of its characteristics[J].Surface&Coatings Technology,2010,205(s1):51-56.
• [11]Paulmier T,Bell J M,Fredericks P M.Development of a novel cathodic plasma/electrolytic deposition technique part 1:Production of titanium dioxide coatings[J].Surface&Coatings Technology,2007,201:8761-8770.
• [12]Liu C J,Zhao Y C,Chen Y S,et al.Surface modification of magnesium alloy via cathodic plasma electrolysis and its influence on corrosion resistance and cytocompatibility[J].Materials Letters,2014,132:15-18.
• [13]韩伟,何业东,薛润东,等.离子体电解阴极沉积Y2O3陶瓷涂层[J].材料热处理学报,2005,26(4):83-86.HAN Wei,HE Ye-dong,XUE Run-dong,et al.Y2O3coatings deposited by cathodic plasma electrolysis[J].Transactions of Materials and Heat Treatment,2005,26(4):83-87.
• [14]薛文斌,金乾,杜建成,等.不锈钢表面阴极微弧电沉积氧化铝薄膜的性能[J].材料研究学报,2012,26(1):21-25.XUE Wen-bin,JIN Qian,DU Jian-cheng,et al.Preparation and characterization of alumina coating on stainless steel by a cathodic microarc electrodeposition[J].Chinese Jouranl of Materials Reserch,2012,26(1):21-25.
• [15]Xue W B,JIN Q,Zhu Q Z.High temperature oxidation behavior of titanium coated by cathodic microarc electrodeposition[J].Transactions of Materials and Heat Treatment,2010,31(9):124-132.
• [16]Bahadori E,Javadpour S,Shariat M H,et al.Preparation and properties of ceramic Al2O3coating as TBCs on MCr Aly layer appliedon Inconel alloy by cathodic plasma electrolytic deposition[J].Surface&Coatings Technology,2013,228:611-614.
• [17]陈海涛,易同斌,张隆平,等.钛合金表面阴极微弧电沉积Al2O3-Si C复合涂层[J].材料导报,2012,26(11):90-93.CHEN Hai-tao,YI Tong-bin,ZHANG Long-ping,et al.Deposition of Al2O3-Si C coating on titanium alloy by cathodic micro-arc electrodeposition process[J].Materials Review,2012,26(11):90-93.
• [18]周帅,何业东,王德仁,等.阴极等离子电解沉积Al2O3-YAG复合涂层及其抗高温氧化性能[J].材料热处理学报,2013,34(12):171-175.ZHOU Shuai,HE Ye-dong,WANG De-ren,et al.Al2O3-YAG composite coating deposited by cathodic plasma electrolysis and its high-temperature oxidation resistance[J].Transactions of Materials and Heat Treatment,2013,34(12):171-175.
• [19]李维学,张凯,戴剑锋,等.TA2钛合金表面Al2O3/石墨自润滑沉积层的制备及其摩擦学性能研究[J].航空材料学报,2013,33(3):46-52.LI Wei-xue,ZHANG Kai,DAI Jian-feng,et al.Preparation and tribological properties of self-lubricating Al2O3/graphite composite coating on TA2titanium[J].Jouural of Aeronautical Materials,2013,33(3):46-52.
• [20]李夕金,程国安,薛文斌,等.Ti Al合金表面阴极微弧制备的Al2O3膜结构与性能[J].粉末冶金材料科学与程,2009,14(2):115-118.LI Xi-jin,CEHNG Guo-an,XUE Wen-bin,et al.Structure and properties of Al2O3coating fabricated by cathodic microarc deposition on Ti Al alloy[J].Materials Science and Engineering of Powder Metallurgy,2009,14(2):115-118.
• [21]孔德军,周朝政.划痕法表征TD处理制备VC涂层界面结合强度[J].航空学报,2012,33(2):362-368.KONG De-jun,ZHOU Chao-zheng.Token of interfacial bonding strength for VC coating prepared by TD process with scratching[J].Acta Aeronautica Et Astronautica Sinica,2012,33(2):362-368.

文章评论(Comment)：