李青春,常国威,李仁兴,陈湘茹,翟启杰

• 1:上海大学材料科学与工程学院
• 2:辽宁工业大学材料与化学工程学院
• 3:上海大学材料科学与工程学院
• 4:辽宁工业大学材料与化学工程学院

摘要(Abstract)：

采用高压脉冲电源对球墨铸铁进行了固态石墨化退火处理,研究了脉冲电流退火处理下保温温度和升温速度对渗碳体石墨化过程的影响。结果表明:在适当的处理时间、足够高的温度下,即在30s内温度达到1100℃时渗碳体可实现快速石墨化。脉冲电流退火处理下碳原子的快速扩散和石墨的快速长大是渗碳体快速石墨化的主要原因。

关键词(KeyWords)： 脉冲电流;球墨铸铁;石墨化

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 李青春,常国威,李仁兴,陈湘茹,翟启杰

参考文献(References)：

• [1]Hummel R E.Electromigration and related failure mechanisms in integrated circuit interconnects[J].International Materials Reviews,1994,39(3):97-111.
• [2]Conrad H.Electroplasticity in metals and ceramics[J].Materials Science and Engineering A,2000,287:276-287.
• [3]TANG Guo-yi,ZHANG Jin,YAN Yun-jie,et al.The engineering application of the electroplastic effect in the cold-drawing of stainless steel wire[J].Journal of Materials Processing Technology,2003,137:96-99.
• [4]ZHOU Yi-zhou,XIAO Su-hong,GUO Jing-dong.Recrystallized microstructure in cold worked brass produced by electropulsing treatment[J].MaterialsLetters,2004,58:1948-1951.
• [5]Xiao S H,Guo J D,Wu S D,et al.Recrystallization in fatigued copper single crystals under electropulsing[J].Scripta Materialia,2002,46:1-6.
• [6]董晓华,侯东芳,李尧.直流脉冲电流对7475铝合金超塑性变形中位错运动的影响[J].机械工程材料,2005,29:17-20.DONG Xiao-hua,HOU Dong-fang,LI Yao.The effect of direct pulses on the movement of dislocations inside 7475 aluminum alloy undergoing superplasticdeformation[J].Materials for Mechanical Engineering,2005,29:17-20.
• [7]LIU Zhi-yi,XU Xiao-chang,CUI Jian-zhong.Effect of electric current pulse on grain growth in superplastic deformation of 2091 Al-Li alloy[J].TransNonferrous Met Soc China,2003,13:743-749.
• [8]刘宗昌,任慧平,宋义全.金属固态相变教程[M].北京:冶金工业出版社,2003:38.
• [9]Barnak J P,Sprecher A F,Conrad H.Colony(grain)size reduction in eutectic Pb-Sn castings by electropulsing[J].Scripta Metallurgica et Materialia,1995,32:879-884.
• [10]Zhang W,Sui M L,Zhou Y Z,et al.Evolution of microstructures in materials induced by electropulsing[J].Micron,2003,34:189-198.
• [11]ZHOU Yi-zhou,XIAO Su-hong,GUO Jing-dong.Recrystallized microstructure in cold worked brass produced by electropulsing treatment[J].MaterialsLetters,2004,58:1948-1951.

文章评论(Comment)：