陈小红,刘平,田保红,张毅,贾淑果,任凤章,井晓天

• 1:西安理工大学材料科学与工程学院
• 2:上海理工大学电功能材料研究所
• 3:河南科技大学材料科学与工程学院

摘要(Abstract)：

研究了合金元素Zr对Cu-15Cr原位复合材料微观组织、力学性能、导电性能及热稳定性的影响规律。用SEM和TEM分别观察了材料的微观组织演变和析出相形貌,测试了不同应变下材料的抗拉强度和导电率,测定了材料的抗软化温度。结果表明:Zr促进Cr的析出,保持了微合金化Cu-15Cr复合材料的导电性;添加少量Zr可使Cu-15Cr-0.1Zr的抗拉强度提高约15%;Zr的加入使复合材料的抗软化温度提高了50℃左右。

关键词(KeyWords)： 原位复合材料;微观组织;强度;电导率;热稳定性

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(50571035);; 国家高新技术研究发展计划(863计划)资助项目(2006AA03Z528)

作者(Author): 陈小红,刘平,田保红,张毅,贾淑果,任凤章,井晓天

参考文献(References)：

• [1]Bevk J,Harbison J P,Bell J L.Anomalousincrease instrength of insituformed Cu-Nb multi-filamentary composite[J].Journal of Applied Physics,1978,49(12):6031-6038.
• [2]葛继平,陈美玲,刘书华.形变Cu-20vol%Fe原位复合材料研究[J].材料热处理学报,2003,24(4):22-28.GEJi-ping,CHENMei-lin,LIUShu-hua.Investigationof a deformation processed Cu-20%Feinsitucomposite[J].Transa Meter Heat Treat,2003,24(4):27-36.
• [3]Snoeck E,Lecouturier F,Thilly L,et al.Microstructural studies of in situ producedfilamentary Cu-Nb wires[J].Scripta Materialia,1998,38(11):1643-1648.
• [4]Hong SI,Hill MA.Microstructure and conductivityof Cu-Nb microcompositesfabricated bythe bundlingand drawing process[J].Scripta Materialia,2001,44(10):2509-2515.
• [5]Zhang D L,Mihara K,Suzuki HG,et al.Effect of the anount of cold working and aging on the ductility of a Cu-15%Cr-0.2%Ti in-situ composite[J].Materials Science and Engineering A,1999,266(6):99-108.
• [6]高海燕,王俊,疏达,等.Cu-Fe-Ag原位复合材料的组织和性能[J].复合材料学报,2006,23(6):121-125.GAO Hai-yan,WANGJun,SHUDa,et al.Microstructure and properties of Cu-Fe-Agin-situ composites[J].Acta Materiae Compositae Sinica,2006,23(6):120-126.
• [7]Suzuki HG,Ma J,Mihara K,et al.Effect of alloyingelements on Cu-15Crin-situ mechanical propertiesincomposites[J].Trans Nonferrous Met Soc China,2004,14(2):284-290.
• [8]Spitzig WA.Strengtheningin heavily deformation processed Cu-20%Nb[J].Acta Metall Mater,1991,39(6):1085-1090.
• [9]Funkenbusch P D,Courtney TH.Microstructural strengtheningincold workedinsitu Cu-14.8vol%Fe composites[J].Scripta Metall,1981,15(12):1349-1354.
• [10]Spitzig WA,Pelton AR,Laabs F C.Characterization of the strength and microstructure of heavily cold worked Cu-Nb composites[J].Acta Metall,1987,35(10):2427-2442.
• [11]Verhoeven J D,Downing HL,Chumbly LS,et al.The resistivity and microstructure of heavily drawn Cu-Nb alloys[J].Journal of Applied Physics,1989,65(3):1293-1301.
• [12]Lee KL,Whitehouse AF,Hong SI.Creep behavior of copper-chromiumin-situ composite[J].Metall Mater Trans A,2004,35(2):695-705.

文章评论(Comment)：