彭桃,张麦仓,王岩,方爽,王淑云,王义胜

• 1:北京科技大学材料科学与工程学院
• 2:中国航空工业集团公司北京航空材料研究院
• 3:中国南方航空工业(集团)有限公司

摘要(Abstract)：

采用ANSYS数值模拟法和显微压痕法对经淬火处理的2A02铝合金叶片锻件的残余应力分布进行分析。结果表明:经过500℃、2 h固溶处理后立即常温水冷的2A02铝合金叶片表面的应力分布为:叶片表面为残余压应力,近叶头部分淬火残余应力数值最小,随着到叶根部分距离的减小,淬火残余应力数值变大。还通过ANSYS数值模拟方法对2A02铝合金叶片的模压冷变形过程进行模拟以计算处理后的残余应力。叶片经过模压冷变形处理后,沿厚度方向的淬火残余应力显著降低,当压下量为厚度的2%时,残余应力的消减效果最佳。

关键词(KeyWords)： 2A02铝合金;叶片;淬火残余应力;模压冷变形

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 彭桃,张麦仓,王岩,方爽,王淑云,王义胜

DOI: 10.13289/j.issn.1009-6264.2015.09.040

参考文献(References)：

• [1]李永春.2A02铝合金铸锭氧化膜缺陷生成原因及预防[J].轻合金加工技术,2005,33(7):20-22.LI Yong-chun.Reasons of causing alumina diaphragm defects in 2A02 aluminium alloy ingot and concerned preventive[J].Light Alloy Fabrication Technology,2005,33(7):20-22.
• [2]刘兵,彭超群,王日初,等.大飞机用铝合金的研究现状及展望[J].中国有色金属学报,2010,20(9):1705-1715.LIU Bing,PENG Chao-qun,WANG Ri-chu,et al.Recent development and prospects for giant plane aluminum alloys[J].Chinese Journal of Nonferrous Metals,2010,20(9):1705-1715.
• [3]赵旭光,郭生栋.基于Ansys实现残余应力模拟的一种简化方法及其改进[C]//第七届全国现代结构工程学术研讨会论文集,天津,2007:1315-1319.ZHAO Xu-guang,GUO Sheng-dong.Simplified method for simulating residual stress based on Ansys and improvement thereof[C]//The Proceedings of the 7th Chinese Conference on Modern Structural Engineering,Tianjin,2007:1315-1319.
• [4]胡永会,吴运新,陈磊,等.X射线法测量淬火铝合金厚板表面残余应力[J].中国材料进展,2011,30(2):51-55.HU Yong-hui,WU Yun-xin,CHEN Lei,et al.Experimental measurement of surface residual stresses of quenched aluminum alloy thick plate by X-Zay method[J].Materials China,2011,30(2):51-55.
• [5]郭俊康,吴运新,胡永会.X射线衍射法在测量铝合金厚板表面残余应力中的应用[J].轻合金加工技术,2010,4:31-34.GUO Jun-kang,WU Yun-xin,HU Yong-hui.Application of X-ray measurement of near surface residual stress in aluminum alloy thick plate[J].Light Alloy Fabrication Technology,2010,4:31-34.
• [6]Carlsson S,Larsson P.On the determination of residual stress and strain fields by sharp indentation testing:Part I:theoretical and numerical analysis[J].Acta Materialia,2001,49(12):2179-2191.
• [7]Carlsson S,Larsson P.On the determination of residual stress and strain fields by sharp indentation testing:Part II:experimental investigation[J].Acta Materialia,2001,49(12):2193-2191.
• [8]Tabor D.The Hardness of Metals[M].Oxford:Clarendon Press,1951.
• [9]Johnson K L.Contact Mechanics[M].Cambridge:Cambridge University Press,1987.
• [10]Johnson K L.The correlation of indentation experiments[J].Journal of the Mechanics and Physics of Solids,1970,18(2):115-126.
• [11]朱才朝,罗家元,李大峰,等.基于流变应力特性的铝合金淬火残余应力数值模拟及试验研究[J].机械工程学报,2010,46(22):41-46.ZHU Cai-chao,LUO Jia-yuan,LI Da-feng,et al.Numerical simulation and experimental investigation of the aluminum alloy quenching-induced residual stress by considering the flow stress characteristic[J].Journal of Mechanical Engineering,2010,46(22):41-46.
• [12]林高用,郑小燕,冯迪,等.铝合金厚板淬火残余应力的研究进展[J].材料导报,2008(6):70-74.LIN Gao-yong,ZHENG Xiao-yan,FENG Di,et al.Research development of quenching-induced residual stress of aluminum thick plates[J].Materials Review,2008(6):70-74.
• [13]李大峰,丁华锋,刘立斌,等.7075铝合金板淬火残余应力模拟及实验研究[J].机械研究与应用,2012(3):92-95.LI Da-feng,DING Hua-feng,LIU Li-bin,et al.Numerical simulation and experimental study of quenching-induced residual stress in 7075 aluminum alloy plates[J].Mechanical Research&Application,2012(3):92-95.
• [14]Larsson P.Investigation of sharp contact at rigid-plastic conditions[J].International Journal of Mechanical Sciences,2001,43(4):895-920.
• [15]Larsson P.On the mechanical behavior at sharp indentation of materials with compressive residual stresses[J].Materials&Design,2011,32(3):1427-1434.
• [16]Larsson P,Blanchard P.On the correlation between residual stresses and global indentation quantities:Numerical results for general biaxial stress fields[J].Materials&Design,2012,37:435-442.
• [17]代伟.模压法消减7A85铝合金接头模锻件淬火残余应力研究[D].湖南:中南大学,2013.DAI Wei.The reduction of quenching residual stress for 7A85 aluminum alloy joint die forging by mold compression[D].Hunan:Central South University,2013.
• [18]Karabin M E,Barlat F,Schultz R W.Numerical and experimental study of the cold expansion process in 7085 plate using a modified split sleeve[J].Journal of Materials Processing Technology,2007,189(1):45-57.
• [19]张勇.振动消除应力技术的应用[J].热加工工艺,2003(4):23-24.ZHANG Yong.The application of technology for vibration stress relief[J].Hot Working Technology,2003(4):23-24.
• [20]杨久强.高强度变形铝合金残余应力的消除[J].锻压技术,1995,20(2):22-32.YANG Jiu-qiang.Residual stress relieving of high-strength wrought aluminium alloy[J].Forging&Stamping Technology,1995,20(2):22-32.

文章评论(Comment)：