信彦辉,李全安

• 1:河南科技大学材料科学与工程学院
• 2:有色金属共性技术河南省协同创新中心

摘要(Abstract)：

采用Gleeble-1500D型热模拟试验机,在变形温度为623~773 K、应变速率为0.002~1 s~(-1)、最大变形程度为50%条件下,研究Mg-7Gd-2.5Nd-0.5Zr耐热镁合金的热压缩变形行为。分析合金在不同变形条件下流变应力的变化规律,并观察合金变形过程中显微组织的变化,建立具有双曲正弦关系的流变应力本构方程。结果表明:该合金的流变应力随变形温度的升高而减小,随应变速率的增大而增大;而且合金在773 K热压缩变形时发生完全动态再结晶,整个组织呈现为均匀细小的等轴晶,有细小颗粒状第二相在动态再结晶的晶界分布;计算出了合金的热变形激活能为235.958 k J/mol;合金适合的热加工温度为723~773 K。

关键词(KeyWords)： 耐热镁合金;变形激活能;热压缩变形

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51171059,51571084);; 河南省重点科技攻关项目(152102210072)

作者(Author): 信彦辉,李全安

DOI: 10.13289/j.issn.1009-6264.2017-0368

参考文献(References)：

• [1]屈伟平,高崧.镁合金的特点及应用现状[J].金属世界,2011(2):10-14.QU Wei-ping,GAO Song.Characteristics of magnesium alloy and its applying current situation[J].Metal World,2011(2):10-14.
• [2]丁文江,吴玉娟,彭立明,等.高性能镁合金研究及应用的新进展[J].中国材料进展,2010,29(8):37-45.DING Wen-jiang,WU Yu-juan,PENG Li-ming,et al.Research and application development of advanced magnesium alloys[J].Materials China,2010,29(8):37-45.
• [3]Mordike B L,Ebert T.Magnesium:properties-applications-potential[J].Materials Science&Engineering A,2001,302(1):37-45.
• [4]丁文江.镁合金科学与技术[M].北京:科学出版社,2007:124-133.
• [5]陈振华.耐热镁合金[M].北京:化学工业出版社,2007:508-533.
• [6]陈振华.变形镁合金[M].北京:化学工业出版社,2005:1-15.
• [7]Zhou H,Wang Q D,Ye B,et al.Hot deformation and processing maps of as-extruded Mg-9.8Gd-2.7Y-0.4Zr Mg alloy[J].Materials Science&Engineering A,2013,576(6):101-107.
• [8]肖宏超,刘楚明,徐璐,等.Mg-10Gd-4.8Y-0.6Zr镁合金热变形行为与加工图[J].中国有色金属学报,2013(2):303-310.XIAO Hong-chao,LIU Chu-ming,XU Lu,et al.Hot deformation behavior and processing map of Mg-10Gd-4.8Y-0.6Zr magnesium alloy[J].Chinese Journal of Nonferrous Metals,2013(2):303-310.
• [9]熊创贤,张新明,陈健美,等.Mg-Gd-Y-Mn耐热镁合金的压缩变形行为研究[J].材料热处理学报,2007,28(3):47-53.XIONG Chuang-xian,ZHANG Xin-ming,CHEN Jian-mei,et al.Deformation behavior of Mg-Gd-Y-Mn heat resistant magnesium alloy during hot compression[J].Transactions of Materials and Heat Treatment,2007,28(3):47-53.
• [10]覃银江,潘清林,何运斌,等.ZK60镁合金高温流变本构模型[J].中南大学学报(自然科学版),2010,41(5):1774-1781.QIN Yin-jiang,PAN Qing-lin,HE Yun-bin,et al.High temperature rheological constitutive model of ZK60 magnesium alloy[J].Journal of Central South University(Natural Science Edition),2010,41(5):1774-1781.
• [11]Mcqueen H J,Ryan N D.Constitutive analysis in hot working[J].Materials Science&Engineering A,2002,322(1/2):43-63.
• [12]Qin Y J,Pan Q L,He Y B,et al.Modeling of flow stress for magnesium alloy during hot deformation[J].Materials Science&Engineering A,2010,527(10):2790-2797.
• [13]Poirier J P.晶体的高温塑性变形[M].关德林,译.大连:大连理工大学出版社,1989:24-34.
• [14]Zener C,Hollomon J H.Effect of strain rate upon plastic flow of steel[J].Journal of Applied Physics,1944,15(1):22-32.
• [15]Xia X S,Zhang K,Li X G,et al.Microstructure and texture of coarse-grained Mg-Gd-Y-Nd-Zr alloy after hot compression[J].Materials&Design,2013,44:521-527.
• [16]Xiao H C,Tang B,Liu C M,et al.Dynamic precipitation in a Mg-Gd-Y-Zr alloy during hot compression[J].Materials Science&Engineering A,2015,645:241-247.

文章评论(Comment)：