彭建,王永建,钟丽萍,孙勇,彭龙飞

• 1:重庆大学材料科学与工程学院
• 2:国家镁合金材料工程技术研究中心

摘要(Abstract)：

对5052铝合金板材热轧过程进行了三维热力耦合模拟,综合考虑热轧过程中轧制速度、变形温度、道次压下量和摩擦系数等因素对热轧过程中轧件变形区内塑性变形和应力分布的影响,建立了多参数的热力耦合热轧模型。结果表明,在轧件变形区内,因加工硬化与动态软化的综合作用,其流变应力呈典型的动态再结晶特征。在变形区内轧件表面因金属流动剧烈,其等效塑性应变和应变速率远远大于轧件心部,塑性变形显著。轧制速度是轧件温度场分布最重要的影响因素之一,轧制速度越大,轧件的温升就越高;而温度是影响等效应力大小的主要因素,温度升高和应变速率降低都使得流变应力降低。

关键词(KeyWords)： 5052铝合金;热轧;热力耦合;塑性变形;应力场

Abstract:

Keywords:

基金项目(Foundation): 国家科技支撑计划项目(2012BAF09B04);; 国际科技合作专项项目(2011DFR50950);; 重庆市政府科技与人才计划(CSTC2013JCYJC6001)

作者(Author): 彭建,王永建,钟丽萍,孙勇,彭龙飞

DOI: 10.13289/j.issn.1009-6264.2015.03.038

参考文献(References)：

• [1]陈婕.5052铝合金热粗轧建模与轧制力预测研究[D].长沙:湖南大学,2009.CHEN Jie.Study on modeling and rolling force prediction model for hot rough rolling of 5052 aluminum alloy[D].Chagnsha:Hunan University,2009.
• [2]何玉辉.板带多道次热轧过程温度场数值模拟与温降模型研究[D].长沙:中南大学,2010.HE Yu-hui.Research on thermal field numerical simulation and temperature fall model of strip during multi-pass hot rolling process[D].Chagnsha:Central South University,2010.
• [3]Duan X,Sheppard T.Three dimensional thermal mechanical coupled simulation during hot rolling of aluminium alloy 3003[J].International Journal of Mechanical Sciences,2002,44(10):2155-2172.
• [4]Bagheripoor M,Bisadi H.Effects of rolling parameters on temperature distribution in the hot rolling of aluminum strips[J].Applied Thermal Engineering,2011,31(10):1556-1565.
• [5]张少军,周纪华,高永生,等.铝合金热塑性变形流动应力及其数学模型[J].北京科技大学学报,1996,18(3):263-266.ZHANG Shao-jun,ZHOU Ji-hua,GAO Yong-sheng,et al.Mathematical model on flow stress of aluminium alloys in hot plastic deformation[J].Journal of University of Science and Technology Beijing,1996,18(3):263-266.
• [6]王卫卫.5052铝板带热连轧全流程温度计算模型研究[D].长沙:中南大学,2012.WANG Wei-wei.The study on the temperature calculation model of 5052 al plate in hot continuous rolling[J].Changsha:Central South University,2012.
• [7]WANG Chun-xia,YU Fu-xiao,ZHAO Da-zhi,et al.Hot deformation and processing maps of DC cast Al-15%Si alloy[J].Materials Science and Engineering A,2013,577:73-80.
• [8]Jiang F,Zhang H,Ji X,et al.Comparative hot deformation characters of Al-Mn-Mg-RE alloy and Al-Mn-Mg-RE-Ti alloy[J].Materials Science and Engineering A,2014,595:10-17.
• [9]Jin N,Zhang H,Han Y,et al.Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature[J].Materials Characterization,2009,60(6):530-536.
• [10]Kapoor R,Shekhawat S K,Samajdar I.Flow localization in an Al-2.5Mg alloy after severe plastic deformation[J].Materials Science and Engineering A,2014,611:114-122.
• [11]Kavosi J,Saei M,Kazeminezhad M,et al.Modeling of dislocation density and strength on rheoforged A356 alloy during multi-directional forging[J].Computational Materials Science,2014,81:284-289.
• [12]Ungár T,Ribárik G,Zilahi G,et al.Slip systems and dislocation densities in individual grains of polycrystalline aggregates of plastically deformed Co Ti and Co Zr alloys[J].Acta Materialia,2014,71:264-282.
• [13]Yellakara R N,Wang Z A three-dimensional dislocation dynamics study of the effects of grain size and shape on strengthening behavior of FCC Cu[J].Computational Materials Science,2014,87:253-259.
• [14]Rodríguez-martínez Ja,Rodríguez-millán M,Rusinek A,et al.A dislocation-based constitutive description for modeling the behavior of FCC metals within wide ranges of strain rate and temperature[J].Mechanics of Materials,2011,43(12):901-912.

文章评论(Comment)：