吕胡缘,胡励,时来鑫,周涛,杨明波

• 1:重庆理工大学材料科学与工程学院
• 2:重庆理工大学重庆市模具技术重点实验室

摘要(Abstract)：

静态再结晶是材料变形后通过热处理来改变组织状态的重要现象。本文重点综述总结了金属静态再结晶行为的数值模拟研究,首先简要介绍了计算材料科学中常用的元胞自动机(Cellular automata,CA)模拟方法,然后分别对元胞自动机模拟的动力学模型和物理模型发展进行详细综述,并分析总结了近年来元胞自动机在金属及其合金静态再结晶行为研究中的应用现状。最后,就金属静态再结晶行为的元胞自动机模拟研究提出相关建议。

关键词(KeyWords)： 静态再结晶行为;微观组织模拟;元胞自动机法;再结晶模型

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51805064,51701034,51822509);; 重庆市教委科学技术研究项目(KJQN201801137KJ1600922);; 重庆市基础研究与前沿探索项目(cstc2017jcyjAX0062,cstc2018jcyjAX0035,cstc2017jcyjAX0381)

作者(Author): 吕胡缘,胡励,时来鑫,周涛,杨明波

DOI: 10.13289/j.issn.1009-6264.2020-0303

参考文献(References)：

• [1] Jin Y,Lin B,Bernacki M,et al.Annealing twin development during recrystallization and grain growth in pure nickel[J].Materials Science and Engineering A,2014,597:295-303.
• [2] Haase C,Kuhbach M,Barralesmora L A,et al.Recrystallization behavior of a high-manganese steel:Experiments and simulations[J].Acta Materialia,2015,100:155-168.
• [3] Burke J E,Turnbull D.Recrystallization and grain growth[J].Progress in Metal Physics,1952,3:220-292.
• [4] Wang K,Wu M,Yan Z,et al.Microstructure evolution and static recrystallization during hot rolling and annealing of an equiaxed-structure TC21 titanium alloy[J].Journal of Alloys and Compounds,2018,752:14-22.
• [5] Xin Y,Zhou H,Yu H,et al.Controlling the recrystallization behavior of a Mg-3Al-1Zn alloy containing extension twins[J].Materials Science and Engineering A,2015,622:178-183.
• [6] Su J,Kabir A S H,Sanjari M,et al.Correlation of static recrystallization and texture weakening of AZ31 magnesium alloy sheets subjected to high speed rolling[J].Materials Science and Engineering,2016,674:343-360.
• [7] Doherty R D,Hughes D A,Humphreys F J,et al.Current issues in recrystallization:A review[J].Materials Science and Engineering A,1997,238(2):219-274.
• [8] Jensen,Juul D.Modelling of microstructure development during recrystallization[J].Scripta Metallurgica et Materialia,1992,27(11):1551-1556.
• [9] Lin Y C,Chen M.Study of microstructural evolution during static recrystallization in a low alloy steel[J].Journal of Materials Science,2009,44(3):835-842.
• [10] 陈学文,郭未昀,周旭东.轧辊用Cr5钢静态再结晶行为及元胞自动机模拟[J].材料热处理学报,2018,39(6):124-132.CHEN Xu-wen,GUO Wei-yun,ZHOU Xu-dong.Static recrystallization behavior and cellular automaton simulation of Cr5 steel for roller[J].Transactions of Materials and Heat Treatment,2018,39(6):124-132.
• [11] Chen J,Wang W H,Sun G X,et al.Overview on numerical simulation of solidification microstructure[J].Journal of Iron and Steel Research International,2001,13(3):62-67.
• [12] Radhakrishnan B,Sarma G B,Zacharia T.Modeling the kinetics and microstructural evolution during static recrystallization—Monte Carlo simulation of recrystallization[J].Acta Materialia,1998,46(12):4415-4433.
• [13] Luton M J,Peczak P.Monte Carlo modeling of dynamic recrystallization:recent developments[J].Materials Science Forum,1993,113-115:67-80.
• [14] 刘芳慧,高明.相场法模拟Zn-Al二元合金凝固过程中的枝晶生长[J].材料导报,2015(12):149-152.LIU Fang-hui,GAO Ming.Numerical simulation of dendrite growth of Zn-Al binary alloy during solidification process using phase-field method[J].Materials Review,2015(12):149-152.
• [15] Li Y,Kim J.Phase-field simulations of crystal growth with adaptive mesh refinement[J].International Journal of Heat and Mass Transfer,2012,55(25/26):7926-7932.
• [16] 关小军,申孝民,王丽君,等一种ELC-BH钢板退火组织演变的Monte Carlo模拟[J].材料热处理学报,2011,32(6):162-166.GUAN Xiao-jun,SHEN Xiao-ming,WANG Li-jun,et al.Evolution of annealing microstructure of an ELC-BH steel sheet simulated by a Monte Carlo model[J].Transactions of Materials and Heat Treatment,2011,32(6):162-166.
• [17] Wang W,Helbert A,Brisset F,et al.Monte Carlo simulation of primary recrystallization and annealing twinning[J].Acta Materialia,2014,81:457-468.
• [18] Radhakrishnan B,Sarma G B,Zacharia T,et al.Monte Carlo simulation of deformation substructure evolution during recrystallization[J].Scripta Materialia,1998,39(12):1639-1645.
• [19] Miodownik M.A review of microstructural computer models used to simulate grain growth and recrystallisation in aluminium alloys[J].Journal of Light Metals,2002,2(3):125-135.
• [20] Yin H,Felicelli S D.A cellular automaton model for dendrite growth in magnesium alloy AZ91[J].Modelling and Simulation in Materials Science and Engineering,2009,17(7):075011-075015.
• [21] He Y,Ding H,Liu L,et al.Computer simulation of 2D grain growth using a cellular automata model based on the lowest energy principle[J].Materials Science and Engineering A,2006,429(1):236-246.
• [22] Aspray W,Burks A,Allison D K.Papers of John von Neumann on Computing and Computer Theory[M].Mit Press Cambridge Ma,1986.
• [23] Hesselbarth H W,Gobel I R.Simulation of recrystallization by cellular automata[J].Acta Metallurgica et Materialia,1991,39(9):2135-2143.
• [24] Weinberg M C,Iii D P B,Shneidman V A.Crystallization kinetics and the JMAK equation[J].Journal of Non Crystalline Solids,1997,219:0-99.
• [25] Goetz R L,Seetharaman V.Static recrystallization kinetics with homogeneous and heterogeneous nucleation using a cellular automata model[J].Metallurgical and Materials Transactions A,1998,29(9):2307-2321.
• [26] Davies C H J.The effect of neighbourhood on the kinetics of a cellular automaton recrystallisation model[J].Scripta Metallurgica Et Materialia,1995,33(7):1139-1143.
• [27] John Humphreys.Recrystallization and Related Annealing Phenomena[M].Elsevier Ltd,2004.
• [28] Kugler G,Turk R.Study of the influence of initial microstructure topology on the kinetics of static recrystallization using a cellular automata model[J].Computational Materials Science,2006,37(3):284-291.
• [29] Zheng C W,Xian N M,Li D Z,et al.Mesoscopic modeling of austenite static recrystallization in a low carbon steel using a coupled simulation method[J].Computational Materials Science,2008,45(2):568-575.
• [30] Davies C H,Hong L.The cellular automaton simulation of static recrystallization in cold-rolled AA1050[J].Scripta Materialia,1999,40(10):1145-1150.
• [31] Rollett A D,Raabe D.A hybrid model for mesoscopic simulation of recrystallization[J].Computational Materials Science,2001,21(1):69-78.
• [32] He Y,Ding H,Ding H,et al.Computer simulation of 2D grain growth using a cellular automata model based on the lowest energy principle[J].Materials Science and Engineering A,2006:236-246.
• [33] Lan Y J,Li D,Li Y,et al.A mesoscale cellular automaton model for curvature-driven grain growth[J].Metallurgical and Materials Transactions B,2006,37(1):119-129.
• [34] Mukhopadhyay P,Loeck M,Gottstein G,et al.A cellular operator model for the simulation of static recrystallization[J].Acta Materialia,2007,55(2):551-564.
• [35] Raabe,Dierk.Introduction of a scalable three-dimensional cellular automaton with a probabilistic switching rule for the discrete mesoscale simulation of recrystallization phenomena[J].Philosophical Magazine A,1999,79(10):2339-2358.
• [36] Marx V,Reher F R,Gottstein G,et al.Simulation of primary recrystallization using a modified three-dimensional cellular automaton[J].Acta Materialia,1999,47(4):1219-1230.
• [37] Janssens K G.Random grid,three-dimensional,space-time coupled cellular automata for the simulation of recrystallization and grain growth[J].Modelling and Simulation in Materials Science and Engineering,2003,11(2):157-171.
• [38] Aretz H,Luce R,Wolske M,et al.Integration of physically based models into FEM and application in simulation of metal forming processes[J].Modelling and Simulation in Materials Science and Engineering,2000,8(6):881-891.
• [39] 陈飞.热锻非连续变形过程微观组织演变的元胞自动机模拟[D].上海:上海交通大学,2012.CHEN Fei.Cellular automaton simulation of microstructure evolution in discontinuous deformation process of hot forging[D].Shanghai:Shanghai Jiao Tong University,2012.
• [40] Zhang F,Liu D,Yang Y,et al.Study of factors affecting simulation of static recrystallization of Ni-based superalloy through cellular automaton model[J].Procedia Engineering,2017,207:2131-2136.
• [41] Zhang Y Q,Jiang S,Hu L,et al.Investigation of primary static recrystallization in a NiTiFe shape memory alloy subjected to cold canning compression using the coupling crystal plasticity finite element method with cellular automaton[J].Modelling and Simulation in Materials Science and Engineering,2017,25(7):075008.
• [42] Lin Y C,Liu Y X,Chen M S,et al.Study of static recrystallization behavior in hot deformed Ni-based superalloy using cellular automaton model[J].Materials and Design,2016,99:107-114.
• [43] 徐倩虹,张驰,张立文,等.Nimonic 80A高温合金静态再结晶行为元胞自动机模拟[J].塑性工程学报,2018,25(6):242-249.XU Qian-hong,ZHANG Chi,ZHANG Li-wen,et al.Cellular automaton simulation of static recrystallization behavior of Nimonic 80A superalloy[J].Journal of Plasticity Engineering,2018,25(6):242-249.
• [44] ukasz ?ach,Jaros?aw Nowak,Svyetlichnyy D.The evolution of the microstructure in AISI 304L stainless steel during the flat rolling-modeling by frontal cellular automata and verification[J].Journal of Materials Processing Technology,2018,255:488-499.
• [45] ach ?ukasz,Svyetlichnyy D S.Evolution of microstructure during the shape rolling modeled by Cellular Automata[J].Key Engineering Materials,2012,504-506:187-192.
• [46] Han F,Tang B,Kou H,et al.Cellular automata modeling of static recrystallization based on the curvature driven subgrain growth mechanism[J].Journal of Materials Science,2013,48:7142-7152.
• [47] Haase C,Barrales-Mora L A.Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys[J].Acta Materialia,2018,150:88-103.
• [48] Sitko M,Chao Q,Wang J,et al.A parallel version of the cellular automata static recrystallization model dedicated for high performance computing platforms development and verification[J].Computational Materials Science,2020,172:109283.

文章评论(Comment)：