李学通,范忠起,王敏婷,杜凤山

• 1:燕山大学国家冷轧板带装备及工艺工程技术研究中心

摘要(Abstract)：

以Cr5MoV钢屑为基体制备具有不同致密度的疏松材料,利用Gleeble-3500和TC-7000现代化测试仪器对Cr5钢疏松材料的变形抗力、热导率、热熔和热扩散系数进行了实测分析,并获得了其本构关系及热物性参数数据。结果表明:致密度越大材料的热容和导热率就越高,而热扩散系数则降低;随着温度的升高,热容参数也随着升高;而导热率和热扩散系数则下降。

关键词(KeyWords)： 疏松铁基合金;热物性参数;致密度;实验分析

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51075352);; 河北省自然科学基金(E2012203028,E2011203090);; 燕山大学青年基金(13LGA002)

作者(Author): 李学通,范忠起,王敏婷,杜凤山

DOI: 10.13289/j.issn.1009-6264.2014.07.015

参考文献(References)：

• [1]黄华贵.大型轧辊高温成形缺陷控制及数值仿真研究[D].秦皇岛:燕山大学,2006.
• [2]Yasser M,Mehdi M.Analytical investigation of heat transfer enhancement in a channel partially filled with a porous material under local thermal nonequilibrium condition[J].International Journal of Thermal Sciences,2011,50(12):2386-2401.
• [3]张沛.大型零件铸锻成形过程数值模拟及集成系统开发[D].秦皇岛:燕山大学,2009.
• [4]康大韬,叶国斌.大型锻件材料及热处理[M].北京:龙门书局,1998:1-5.
• [5]任运来,张建国,杨晓禹,等.大型锻件锻造新中心压实法及工艺参数研究[J].机械工程学报,2011,47(16):61-66.REN Yun-lai,ZHANG Jian-guo,YANG Xiao-yu,et al.Research on new JTS method and its process parameters[J].Journal of Mechanical Engineering,2011,47(16):61-66.
• [6]黄华贵,杜凤山,许志强.大锻件内部疏松缺陷锻造压实过程FEM分析[J].工程力学,2011,28(9):245-250.HUANG Hua-gui,DU Feng-shan,XU Zhi-qiang.FEM analyses on compaction of porosity defects inside heavy forgings during hot forging process[J].Engineering Mechanics,2011,28(9):245-250.
• [7]耿小亮,张克实,郭运强,等.非均质材料微成形过程的晶体塑性模拟[J].材料科学与工艺,2010,18(3):297-301.GENG Xiao-liang,ZHANG Ke-shi,GUO Yun-qiang,et al.Crystal plasticity simulation study on the micro-forming of heterogeneous materials[J].Materials Science&Technology,2010,18(3):297-301.
• [8]Ivan V,Jennings H M,Andrade JoséE,et al.A novel and general form of effective stress in a partially saturated porous material:The influence of microstructure[J].Mechanics of Materials,2011,43(1):25-35.
• [9]Russo SLo,Mazzoldi P,Scotoni I,et al.Effect of nitrogen-ion implantation on the unlubricated sliding wear of steel[J].Appl Phys Lett,1979,34:627-629.
• [10]张文华,王学泽.等静压金属铍材热常数测试[J].稀有金属,2003,27(1):219-220.ZHANG Wen-hua,WANG Xue-ze.Testing of thermal constant of isostatic pressed metal beryllium material[J].Chinese Journal of Rare Metals,2003,27(1):219-220.

文章评论(Comment)：