王泽民,刘庆冬,刘文庆

• 1:上海大学微结构研究重点实验室

摘要(Abstract)：

把Nb-Mo-V微合金钢在1200℃固溶0.5h后淬火,在450~650℃回火4h,用透射电镜(TEM)和三维原子探针(3DAP)分析回火组织演变和碳化物的析出特征。结果表明,随回火温度增加,高能马氏体向低能铁素体转变过程中伴随着数量和大小不同的碳化物析出,其中600℃回火样品中C-Nb-Mo-V团簇的数量密度最大,对应二次硬化的硬度峰值。在碳化物形成过程中,Nb和V比Mo优先形成碳化物。

关键词(KeyWords)： 三维原子探针;微合金钢;碳化物;回火

Abstract:

Keywords:

基金项目(Foundation): 上海市纳米专项项目(0552nm049);; 上海市重点学科资助项目(T0101)

作者(Author): 王泽民,刘庆冬,刘文庆

参考文献(References)：

• [1]Hong S G,Kang K B,Park C G.Strain induced precipitation of NbC in Nb and Nb-Ti microalloyed HSLA steels[J].Scripta Materialia,2002,46(2):163-168.
• [2]Dutta B,Valdes E,Sellars C M.Mechanism and kinetics of strain induced precipitation of Nb(C,N)in austenite[J].Acta Metal Mater,l992,40(4):653-662.
• [3]Liu W J,Jonas J J.Nucleation kinetics of Ti carbonitride in microalloyed austenite[J].Metall Trans A,1989,20:689-697.
• [4]Poths R M,Higginson R L,Palmiere E J.Complex precipitation behavior in a microalloyed plate steel[J].Scripta Materialia,2001,44(1):147-151.
• [5]Dhua S K,Mukerjee D,Sarma D S.Influence of tempering on the mirostructure and mechanical properties of HSLA-100 steel plates[J].Metall Mater TransA,2001,32:2259-2270.
• [6]Isheim D,Kolli R P,Fine M E,et al.An atom-probe tomograpic study of the temporal evolution of the nanostructure of Fe-Cu based high-strenguh low-carbon steels[J].Scripta Materialia,2006,55(1):35-40.
• [7]刘文庆,刘庆冬,李聪,等.三维原子探针对为合金钢中GP区的观测[J].江苏大学学报(自然科学版),2008,29(2):131-133.LIU Wen-qing,LIU Qing-dong,LI Cong,et al.Three dimensional atom probe observation of GP zone in micro-alloyed steel[J].Journal of Jiangsu University(Natural Science Edition),2008,29(2):131-133.
• [8]胡光立,谢希文.钢的热处理原理与工艺[M].西安:西北工业大学出版社,1996:88.
• [9]Miller M K.Atom Probe Tomography:Analysis at the Atomic Level[M].New York:Kluwer Academic/Plenum Publishers,2000:157.

文章评论(Comment)：