杨书廷,杨伟光,尹艳红,杨金鑫,岳红云

• 1:河南师范大学化学与环境科学学院
• 2:河南师范大学化学与环境科学学院
• 3:河南师范大学化学与环境科学学院
• 4:河南师范大学化学与环境科学学院

摘要(Abstract)：

采用改进的多元醇还原法以乙二醇为反应介质、聚乙烯吡咯烷酮(PVP)为保护剂、水合肼为还原剂,制备出了AB5型La-Ni-Pt纳米合金催化剂。同时采用了液相微波高温高压热处理对样品进行合金化处理。并采用XRD、TEM、SEM研究了其对样品的晶相结构和微观形貌的影响。测量结果表明,与传统的高温固相热处理相比,液相微波热处理能在较低的温度400-600℃和较短的时间120s使样品合金化,同时并没有引起样品的晶粒和颗粒的明显长大。将微波热处理过的样品和未经微波热处理过的样品作为PEMFC阳极催化材料,进行电池性能比较,测试结果表明了经过微波热处理的样品其电催化性能得到较大的提高。

关键词(KeyWords)： La-Ni-Pt纳米合金;微波热处理;阳极催化剂

Abstract:

Keywords:

基金项目(Foundation): 河南省重大科技攻关项目(0524250021,0324210007)

作者(Author): 杨书廷,杨伟光,尹艳红,杨金鑫,岳红云

参考文献(References)：

• [1]Han J N,Park G G,Yoon Y G,et al.A new evaluation method of anode/cathode used for polymer electrolyte membrane fuel cell[J].Int J Hydrogen Energy,2003,28(6):609-613.
• [2]Scholta J,Rohland B,Trapp V,et al.Investigations on novel low-cost graphite composite bipolar plates[J].J Power Sources,1999,84(2):231-234.
• [3]Chu D,Jiang R Z.Comparative studies of polymer electrolyte membrane fuel cell stack and single cell[J].J Power Sources,1999,80(1):226-234.
• [4]Kumar A,Reddy R G.Effect of channel dimensions and shape in the flow-field distributor on performance of polymer electrolyte membrane fuel cells[J].JPower Sources,2003,113(1):11-18.
• [5]Liu P,Logadottir A,Norskov J K.Modeling the electro-oxidation of CO and H2/CO on Pt,Ru,PtRu and Pt3Sn[J].Electrochim Acta,2003,48(25-26):3731-3742.
• [6]Chou K C,Li Q,Lin Q,et al.Kinetics of absorption and desorption of hydrogen in alloy Powder[J].Int J Hydrogen Energy,2005,30(3):301-309.
• [7]袁华堂,高学平,申泮文,等.我国金属氢化物化学研究[J].化学通报,1999,11:7-13.YUAN Hua-tang,GAO Xue-ping,SHEN Pan-wen,et al.Study on metal hydride chemistry in China[J].Huaxue Tongbao,1999,11:7-13.
• [8]杨书廷,曹朝霞,张焰峰.质子交换膜燃料电池新型纳米稀土催化剂的制备与性质[J].无机材料学报,2004,19(4):921-925.YANG Shu-ting,CAO Zhao-xia,ZHANG Yan-feng.Preparation and characteristic of new type nano rare earth electrocatalyst for PEMFC[J].Journal ofInorganic Materials,2004,19(4):921-925.
• [9]Su M Z,Liu S F,Qian X L,Lin J H.An alternative approach to the finely crystalline powder of rare earth-transition metal alloys[J].J Alloys Compds,1997,249:229-233.
• [10]Iyuke S E,Mohamad A B,Kadhum A A H,et al.Improved membrane and electrode assemblies for proton exchange membrane fuel cells[J].J Power Sources,2003,114(2):195-202.
• [11]Perry W L,Cooke D W,Katz J D.On the possibility of a significant temperature gradient in supported metal catalysts subjected to microwave heating[J].CatalLett,1997,47:1-4.
• [12]Palchik O,Kerner R,Zhu Z,Gedanken A.Preparation of Cu2-xTe and HgTe by using microwave heating[J].J Sol Stat Chem,2000,154:530-534.
• [13]Chiu K Y,Cheng F T,Man H C.A preliminary study of cladding steel with NiTi by microwave-assisted brazing[J].Mater Sci Eng A,2005,407:273-281.
• [14]刘庆业,蒋治良,蒙冕武.钯纳米微粒的微波高压液相合成及共振散射光谱研究[J].分析检测技术与仪器,2001,7(4):199-203.LIU Qing-ye,JIANG Zhi-liang,MENG Mian-wu.Microwave high-pressure synthesis of Pd nanoparticle and its spectral properties[J].Analysis and TestingTechnology and Instruments,2001,7(4):199-203.

文章评论(Comment)：