白培康,李玉新,刘斌

• 1:中北大学材料科学与工程学院

摘要(Abstract)：

采用激光烧结成形技术研究了不同工艺参数对Fe-16%Ni金属粉末选区激光烧结成型件微观结构和致密性的影响。结果表明,随着脉冲宽度、扫描速度和铺粉厚度的增加,烧结后试样的密度先增加然后减少,随着扫描间距的增加,烧结后试样的密度减小。当脉冲宽度0.7 ms,扫描速度1000 mm/min,铺粉厚度0.15 mm,扫描间距0.15 mm时,烧结成型件成型质量较好。

关键词(KeyWords)： 选择性激光烧结;致密性;微观结构;Fe-16%Ni金属粉末

Abstract:

Keywords:

基金项目(Foundation): 教育部新世纪优秀人才支持项目国家自然科学基金(50975264);; 山西省青年科学基金(2010021022-2)

作者(Author): 白培康,李玉新,刘斌

DOI: 10.13289/j.issn.1009-6264.2011.06.002

参考文献(References)：

• [1]Guo Dong,Li Long-tu,Cai Kai,Rapid prototyping of piezoelectric ceramics via selective laser sintering and gelcasting[J].Journal of the AmericanCeramic Society,2004,87:17-22.
• [2]费群星,张雁,谭永生,等.镍-青铜合金激光熔覆成形工艺研究[J].材料热处理学报,2008,29(1):141-145.FEI Qun-xing,ZHANG Yan,TAN Yong-sheng,et al.Investigation of laser rapid forming of nickel-bronze alloy components[J].Transactions ofMaterials and Heat Treatment,2008,29(1):141-145.
• [3]Lu L,Fuh J Y H,Chen Z D.In situ formation of TiC composite using selective laser melting[J].Mater Res Bull,2000,35(9):1555-1561.
• [4]Abe F,Costa Santors E,Kitamura Y.Influence of forming conditions on the titanium model in rapid prototyping with the selective laser melting process[C]//Proceedings of the Institution of Mechanical Engineers,Part C:Journal of Mechanical Engineering Science,2004,218(7):711-719.
• [5]Krutha J P,Froyenb L,Van Vaerenbergha J.Selective laser melting of iron-based powder[J].Journal of Materials Processing Technology,2004,149(1-3):616-622.
• [6]Kozo O,Masanori S.Flexible manufacturing of metallic products by selective laser melting of powder[J].International Journal of Machine Tools&Manufacture,2006,46(11):1188-1193.
• [7]吴伟辉,杨永强.选择性激光熔化快速成形系统的关键技术[J].机械工程学报,2007,43(8):175-180.WU Wei-hui,YANG Yong-qiang.Key techniques of selective laser melting rapid prototyping system[J].Chinese Journal of Mechanical Engineering,2007,43(8):175-180.
• [8]付立定,史玉升.316L不锈钢粉末选择性激光熔化快速成形的工艺研究[J].应用激光,2008,28:108-111.FU Li-ding,SHI Yu-sheng.The process research of 316L stainless steel in selective laser melting[J].Applied Laser,2008,28:108-111.

文章评论(Comment)：