崔东升,王景,于卓立,李罡,祝士博,张清扬,邱然锋

• 1:河南科技大学材料科学与工程学院
• 2:龙门实验室

摘要(Abstract)：

钛与铝是轻质高强合金的典型代表，在“空天海化”领域有着广阔的应用场景。钛/铝异种金属构件能充分发挥各自的优异性能，提升经济效益。随着国防与“空天海化”事业的快速发展，钛/铝异种金属连接件也受到了高度的重视，而熔钎焊工艺为钛/铝的可靠连接提供了可行方案。本文较为详细地介绍了钛/铝异种金属熔钎焊工艺的研究进展，重点综述了激光熔钎焊、电弧熔钎焊、电子束熔钎焊3种工艺方法的研究进展，并对其发展进行了展望。

关键词(KeyWords)： 钛合金;铝合金;熔钎焊

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51875177);; 龙门实验室前沿探索课题(LMQYTSKT010);; 河南省科技攻关项目(242102220080,242102220090)

作者(Author): 崔东升,王景,于卓立,李罡,祝士博,张清扬,邱然锋

DOI: 10.13289/j.issn.1009-6264.2024-0014

参考文献(References)：

• [1] Zhang Z H,Liu Q,H Y,et al.Room-temperature compressive deformation behavior of high-strength Ti-15V-3Al-3Cr-3Sn-1Nb-1Zr alloy[J].Journal of Materials Engineering & Performance,2017,26(7):3368-3375.
• [2] Wan L,Lv S,Huang Y,et al.Effect of hot dip aluminising on interfacial microstructure and mechanical properties of Ti/Al joint by TIG arc welding brazing[J].Science and Technology of Welding and Joining,2015,20(2):164-171.
• [3] 马光，孙晓亮.钛基钎料的应用及发展现状[J].钛工业进展，2007(5):1-4.MA Guang,SUN Xiao-liang.The application and development status of titanium based brazing materials[J].Titanium Industry Progress,2007(5):1-4.
• [4] Chen X,Xie R,Lai Z,et al.Ultrasonic-assisted brazing of Al-Ti dissimilar alloy by a filler metal with a large semi-solid temperature range[J].Materials & Design,2016,95:296-305.
• [5] Lv S X,Jing X J,Huang Y X,et al.Investigation on TIG arc welding-brazing of Ti/Al dissimilar alloys with Al based fillers[J].Science and Technology of Welding and Joining,2012,17(7):519-524.
• [6] 张启运，庄鸿寿.钎焊手册[M].第3版.北京：机械工业出版社，2017:315-316.
• [7] 刘德运，沈元勋，李秀朋，等.钛合金与铝合金异种金属钎焊及熔钎焊研究进展[J].焊接，2023(12):50-57.LIU De-yun,SHEN Yuan-xun,LI Xiu-peng,et al.Research progress on brazing and welding-brazing of titanium alloy and aluminum alloy dissimilar metals[J].Welding & Joining,2023(12):50-57.
• [8] 王梓懿.铝/铜熔钎焊工艺及其界面机理研究[D].兰州：兰州理工大学，2018.WANG Zi-yi.Study on the Al/Cu welding-brazing process and its interfacial mechanism[D].Lanzhou:Lanzhou University of Technology,2018.
• [9] 陈国财，胡德安，程东海，等.添加Ni中间层的镁/钛激光熔钎焊工艺及接头性能研究[J].南昌航空大学学报(自然科学版),2021,35(1):63-67.CHEN Guo-cai,HU De-an,CHENG Dong-hai,et al.Study on properties and technology of Mg/Ti laser welding-brazing joint with Ni interlayer[J].Journal of Nanchang Hangkong University·Natural Sciences,2021,35(1):63-67.
• [10] 檀财旺，黄煜华，陈波，等.镁/钛激光熔钎焊界面微观结构与元素热力学行为分析[J].中国激光，2016,43(3):93-101.TAN Cai-wang,HUANG Yu-hua,CHEN Bo,et al.Microstructure and thermodynamic behavior of laser welded-brazed Mg/Ti dissimilar joint[J].Chinese Journal of Lasers,2016,43(3):93-101.
• [11] Xu C.The influence of Al content from filler metals on tungsten inert gas welding-brazing of Mg-Ti[J].Materials Research Express,2019,6(11):116567.
• [12] 刘陆涛，浦娟.Cs对铝/钢激光熔钎焊接头组织及性能的影响[J].焊接，2023(10):13-17.LIU Lu-tao,PU Juan.Effect of Cs on microstructure and properties of Al/steel laser welded-brazed joints[J].Welding & Joining,2023(10):13-17.
• [13] 谭攀，盛陈，邱成果，等.啃削量对铝/钢啃削辅助电弧熔钎焊接头组织与性能的影响[J].焊接学报，2023,44(4):98-104.TAN Pan,SHENG Chen,QIU Cheng-guo,et al.The effect of gnawing amount on the microstructure and properties of aluminum/steel gnawing assisted arc fusion brazing joints[J].Transactions of the China Welding Institution,2023,44(4):98-104.
• [14] 张佳琪，刘云祺，何绍雄，等.超声振动钢/铝对接接头激光-MIG复合熔钎焊工艺研究[J].中国激光，2022,49(16):106-114.ZHANG Jia-qi,LIU Yun-qi,HE Shao-xiong,et al.Ultrasonic vibration steel/aluminum butt joints by laser-MIG hybrid fusion-brazing welding[J].Chinese Journal of Lasers,2022,49(16):106-114.
• [15] 丛伟，韩世伟，罗展，等.焊接电流对铝合金和不锈钢电弧熔钎焊接头性能的影响[J].热加工工艺，2022,51(23):19-23.CONG Wei,HAN Shi-wei,LUO Zhan,et al.Effect of welding current on properties of aluminum alloy and stainless steel arc welding brazing joints[J].Hot Working Technology,2022,51(23):19-23.
• [16] Wang Z,Shen J,Hu S,et al.Investigation of welding crack in laser welding-brazing welded TC4/6061 and TC4/2024 dissimilar butt joints[J].Journal of Manufacturing Processes,2020,60:54-60.
• [17] 王佳杰，宋晓国，武鹏博，等.铝/钛异种金属激光/激光-CMT复合熔钎焊工艺及其组织与力学性能[J].焊接学报，2023,44(2):54-60.WANG Jia-jie,SONG Xiao-guo,WU Peng-bo,et al.Process,microstructure and properties of Al/Ti dissimilar metals with laser/laser-CMT hybrid welding-brazing[J].Transactions of the China Welding Institution,2023,44(2):54-60.
• [18] 李永梅，陈利华，王延龙，等.热输入对钛铝异种合金激光自熔钎焊接头组织与力学性能的影响[J].热加工工艺，2023,52(9):47-50.LI Yong-mei,CHEN Li-hua,WANG Yan-long,et al.Effect of heat input on microstructure and mechanical properties of laser self fluxing brazed Ti/Al dissimilar alloy joints[J].Hot Working Technology,2023,52(9):47-50.
• [19] 兰天，董鹏，肖荣诗.铝/钛异种合金激光深熔钎焊试验分析[J].焊接学报，2010,31(8):109-112.LAN Tian,DONG Peng,XIAO Rong-shi.Analysis of laser deep penetration brazing of aluminum and titanium alloys[J].Transactions of the China Welding Institution,2010,31(8):109-112.
• [20] 汪认，阚晓阳，赵勇，等.钛/铝异种合金激光熔钎焊接头组织与性能[J].江苏科技大学学报(自然科学版),2017,31(2):153-157.WANG Ren,KAN Xiao-yang,ZHAO Yong,et al.Microstructure and properties of laser welding-brazing joint of Ti/Al dissimilar alloys[J].Journal of Jiangsu University of Science and Technology (Natural Science Edition),2017,31(2):153-157.
• [21] 陈树海，李俐群，陈彦宾.光斑形式对Ti/Al异种合金激光熔钎焊特性的影响[J].焊接学报，2008,29(6):49-52.CHEN Shu-hai,LI Li-qun,CHEN Yan-bin.Welding characteristics of Al/Ti dissimilar alloys by laser welding-brazing with different spot[J].Transactions of the China Welding Institution,2008,29(6):49-52.
• [22] 陈树海，李俐群，陈彦宾.矩形光斑钛/铝异种合金激光熔钎焊[J].中国激光，2008,35(12):2036-2041.CHEN Shu-hai,LI Li-qun,CHEN Yan-bin.Laser welding-brazing of Ti/Al dissimilar alloys joint with rectangle spot[J].Chinese Journal of Lasers,2008,35(12):2036-2041.
• [23] 陈树海，李俐群，陶汪，等.电流辅助钛/铝异种合金激光熔钎焊的特性[J].中国有色金属学报，2009,19(11):1942-1947.CHEN Shu-hai,LI Li-qun,TAO Wang,et al.Laser welding-brazing characteristics of Ti/Al dissimilar alloy with assistant current[J].The Chinese Journal of Nonferrous Metals,2009,19(11):1942-1947.
• [24] Zhou J,Zhou D,Liu J.Effect of oscillating laser beam on the interface and mechanical properties of Ti/Al fusion welding joint[J].Journal of Materials Research and Technology,2022,19:1993-2007.
• [25] Zhang J,Zhao J,Hu K,et al.Improving intermetallic compounds inhomogeneity of Ti/Al butt joints by dual laser-beam bilateral synchronous welding-brazing[J].Optics & Laser Technology,2022,146:107533.
• [26] 刘爱国，郭效盟.铝/钢异种金属电弧熔钎焊研究现状[J].焊接，2023(11):53-61.LIU Ai-guo,GUO Xiao-meng.Research status of arc welding-brazing of aluminum/steel[J].Welding & Joining,2023(11):53-61.
• [27] 徐文虎，杨瑾，肖明，等.铝/铜异种金属熔钎焊研究现状[J].上海工程技术大学学报，2021,35(3):215-228.XU Wen-hu,YANG Jin,XIAO ming,et al.Research status of dissimilar welding-brazing of aluminum to copper[J].Journal of Shanghai University of Engineering Science,2021,35(3):215-228.
• [28] 吕世雄，敬小军，黄永宪，等.钛/铝异种合金电弧熔钎焊接头界面特征及力学性能[J].焊接学报，2012,33(6):23-26.Lü Shi-xiong,JING Xiao-jun,HUANG Yong-xian,et al.Interface characteristic and property of Ti/Al dissimilar alloys joint with arc welding-brazing[J].Transactions of the China Welding Institution,2012,33(6):23-26.
• [29] 马志鹏，于心泷，孟庆武.钛/铝异种合金电弧熔钎焊接接头的组织与断裂行为[J].中国有色金属学报，2015,25(11):3067-3076.MA Zhi-peng,YU Xin-long,MENG Qing-wu.Microstructure and fracture behavior of arc welding-brazing joints between titanium and aluminum dissimilar alloys[J].The Chinese Journal of Nonferrous Metals,2015,25(11):3067-3076.
• [30] 苗玉刚，王腾，周玥，等.铝/钛异种金属旁路分流MIG电弧熔钎焊特性[J].焊接学报，2015,36(1):47-50.MIAO Yu-gang,WANG Teng,ZHOU Yue,et al.Characteristics and mechanical properties of bypass-current welding-brazing dissimilar Al/Ti joints[J].Transactions of the China Welding Institution,2015,36(1):47-50.
• [31] 吕世雄，崔庆龙，黄永宪，等.Ti/Al异种合金电弧熔钎焊接头界面断裂行为分析[J].焊接学报，2013,34(6):33-36.Lü Shi-xiong,CUI Qing-long,HUANG Yong-xian,et al.Analysis of interface fracture behavior of arc fusion-brazed joint between titanium and aluminum dissimilar alloys[J].Transactions of the China Welding Institution,2013,34(6):33-36.
• [32] 崔庆龙.预镀层钛合金与铝合金电弧熔钎焊接头界面组织及力学性能分析[J].焊接学报，2016,37(10):125-128.CUI Qing-long.Microstructure and mechanical properties of TIG weldedbrazed joint of pre-coating titanium and aluminum alloy[J].Transactions of the China Welding Institution,2016,37(10):125-128.
• [33] Zhang Y,Huang J,Ye Z,et al.Influence of welding parameters on the IMCs and the mechanical properties of Ti/Al butt joints welded by MIG/TIG double-sided arc welding-brazing[J].Journal of Alloys and Compounds,2018,747:764-771.
• [34] 张鑫，吕涛，李书齐，等.Al73-Si10-Ni9-Ag8粉末填充材料对TC4钛合金/2A14铝合金电弧熔钎焊接头性能的影响[J].轻合金加工技术，2020,48(5):64-68.ZHANG Xin,Lü Tao,LI Shu-qi,et al.Effect of Al73-Si10-Ni9-Ag8 powder filling material on the performance of TC4 Ti alloy/2A14 Al alloy arc fusion brazing joints[J].Light Alloy Fabrication Technology,2020,48(5):64-68.
• [35] 宋琳玲，魏守征，李志勇，等.钛/铝双面冷弧MIG组合熔钎焊接头组织和性能[J].焊接学报，2021,42(2):63-68.SONG Lin-ling,WEI Shou-zheng,LI Zhi-yong,et al.Structure and properties of titanium/aluminum double-sided cold arc MIG combined fusion brazing joint[J].Transactions of the China Welding Institution,2021,42(2):63-68.
• [36] 张萍，刘德波.工艺参数对钛与铝异种金属熔钎焊铺展行为及接头力学性能的影响[J].轻合金加工技术，2018,46(1):67-72.ZHANG Ping,LIU De-bo.Influence of process parameters on the spreading behavior of melt-brazing and the mechanical properties of welding joint of the titanium and aluminum dissimilar metal[J].Light Alloy Fabrication Technology,2018,46(1):67-72.
• [37] 王亚荣，张勇智，许超，等.基于电子束热源的钒合金/不锈钢连接技术研究[J].机械工程学报，2014,50(10):58-64.WANG Ya-rong,ZHANG Yong-zhi,XU Chao,et al.Research on welding processes of vanadium alloy/stainless steel based on electron beam[J].Journal of Mechanical Engineering,2014,50(10):58-64.
• [38] 常艳君.铝合金、钛合金电子束焊接接头组织、性能和焊接性能研究[D].内蒙古：内蒙古工业大学，2005.CHANG Yan-jun.Study on the microstructure,properties,and welding performance of electron beam welded joints aluminum and titanium alloys[D].Inner Mongolia:Inner Mongolia University of Technology,2005.
• [39] 王亚荣，滕文华，余洋，等.铝/钛异种金属的电子束熔钎焊[J].机械工程学报，2012,48(20):91-95.WANG Ya-rong,TENG Wen-hua,YU Yang,et al.Electron beam welding-brazing of Ti/Al dissimilar metals[J].Journal of Mechanical Engineering,2012,48(20):91-95.
• [40] 王廷，李洪剑，蒋思远，等.铝/钛异种金属填丝电子束熔钎焊接头组织与性能[J].焊接学报，2017,38(8):1-4.WANG Ting,LI Hong-jian,JIANG Si-yuan,et al.Microstructure and mechanical properties of EBW-brazed titanium to aluminum joint using AlSi5 filler wire[J].Transactions of the China Welding Institution,2017,38(8):1-4.
• [41] Han K,Wang T,Jiang S,et al.Effect of gap clearance on microstructure and mechanical properties of electron beam welding-brazing Ti/Al butt joint with Al-Mg filler wire[J].Journal of Materials Engineering and Performance,2023:1-11.
• [42] 李洪剑.基于空间电子束热源的TA2纯钛/2024铝合金熔钎焊工艺及机理研究[D].哈尔滨：哈尔滨工业大学，2016.LI Hong-jian.Process and mechanism research of welding-brazed TA2 pure titanium to 2024 alumimum alloy joint based on space electron beam heat source[D].Harbin:Harbin Institute of Technology,2016.
• [43] 曲树平，王晓军，许海鹰，等.铝钛异种合金电子束焊接接头缺陷分析[J].电焊机，2019,49(1):97-102.QU Shu-pin,WANG Xiao-jun,XU Hai-ying,et al.Defect analysis of aluminum-titanium dissimilar alloy electron beam welded joint[J].Electric Welding Machine,2019,49(1):97-102.
• [44] 丛家慧，徐永臻，王磊，等.超声冲击对TC4钛合金激光焊接接头疲劳性能的影响[J].稀有金属，2022,46(11):1414-1421.CONG Jia-hui,XU Yong-zhen,WANG Lei,et al.Ultrasonic impact treatment on fatigue properties of laser welded joints of TC4 titanium alloy[J].Chinese Journal of Rare Metals,2022,46(11):1414-1421.
• [45] 张超，张虎，周云，等.激光冲击强化对TC11钛合金焊接接头层深残余应力的影响[J].焊管，2023,46(9):21-24.ZHANG Chao,ZHANG Hu,ZHOU Yun,et al.Effect of laser shock strengthening on deep residual stress in welded joints of TC11 titanium alloy[J].Welded Pipe and Tube,2023,46(9):21-24.
• [46] 许明方，陈玉华，邓怀波，等.超声辅助CMT电弧增材制造TC4钛合金微观组织和力学性能研究[J].精密成形工程，2019,11(5):142-148.XU Ming-fang,CHEN Yu-hua,DENG Huai-bo,et al.Microstructure and mechanical properties of TC4 titanium alloy made by UVA-CMT WAAM[J].Journal of Netshape Forming Engineering,2019,11(5):142-148.
• [47] 檀财旺，张泽水，李昊岳，等.激光毛化对铝/钛激光熔钎焊界面组织及性能的影响[J].电焊机，2022,52(6):78-86.TAN Cai-wang,ZHANG Ze-shui,LI Hao-yue,et al.Effect of laser surface texturing on interfacial microstructure and mechanical properties of laser welded-barzed Al/Ti joint[J].Electric Welding Machine,2022,52(6):78-86.
• [48] 魏守征，李亚江.钛/铝异种轻金属熔焊缺陷及解决工艺[J].焊接技术，2014,43(4):59-63.WEI Shou-zheng,LI Ya-jiang.Welding defects and improving technologies during fusion welding of Ti/Al dissimilar lightweight alloys[J].Welding Technology,2014,43(4):59-63.

文章评论(Comment)：