Kyozo Arimoto,Fumiaki Ikuta,Takashi Horino,Shigeyuki Tamura,Michiharu Narazaki,Yoshio Mikita

• 1:Arimotech Ltd.
• 2: Osaka
• 3: Japan
• 4:Neturen Co. Ltd.

摘要(Abstract)：

关键词(KeyWords)：

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): Kyozo Arimoto,Fumiaki Ikuta,Takashi Horino,Shigeyuki Tamura,Michiharu Narazaki,Yoshio Mikita

参考文献(References)：

• 1Totten G E,Bates C E and Clinton N A.Handbook of Quenchants and Quenching Technology.1993,Materials Park:ASM International,441-494.
• 2Narazaki M,Totten G E and Webster G E.Hardening by Reheating and Quenching.In Totten G E,Howes M and Inoue T,Eds.Handbook pf Residual Stress and Deformation of Steel.2001,Materials Park:ASM International,248-295.
• 3Arimoto K,Li G,Arvind A,and Wu W T.The Modeling of Heat Treating Process.In Wallis R A and Walton H W,Eds.Proceedings of the18th Heat Treating Conference.Rosemont:ASM International,1998,23-30.
• 4Arimoto K.,Lambert D,Lee K,Wu W T and Narazaki M.Prediction of Quench Cracking by Computer Simulation.Midea S J and Paffmann G D Eds.Proceedings of the19th Heat Treating Conference,Cincinnati:ASM International,1999,435-440.
• 5Scott H.Origin of Quenching Cracks.Scientific Papers of the Bureau of Standards,1925,513,Sep.:399-444.
• 6Heyn E.Internal Strains in Cold-Wrought Metals,and Some Troubles Caused Thereby.J.Inst.Metal.,1914,12:3-37.
• 7Buhler H and Scheil E.Combined Effect of Thermal and Transformation Stresses in Quenched Steel.Arch.Eisenhutten.,1933,6(7):283-288.(in German)
• 8Sachs G The Determination of Residual Stresses in Rods and Tubes.Z.Metallkunde,1927,19(9):352-357.(in German)
• 9Nishikiori K and Iwaki T.Origin of Quench Cracks in Tungsten Steels and Their Prevention.Tetsu-to-Hagane,1936,22(10):786-791.(in Japanese)
• 10Udy M C and Barnett M K.A Laboratory Study of Quench Cracking in Cast Alloy Steels.Trans.ASM,1947,38:471-487.
• 11Wells C,Sawyer C F,Broverman I and Mehl R F.A Quench Cracking Susceptibility Test for Hollow Cylinders.Trans.ASM,1950,42:206-232.
• 12Spretnak J W and Busby C C.Pre-Bore Quench for Hollow Cylinders.Trans.ASM,1950,42:270-282.
• 13Chapman R D and Jominy W E.A Test for Measuring Quench Crack Sensitivity of Engineering Alloy Steels.Metal Progress,1953,Sep.:67-72.
• 14Isomura R and Sato H.On Quench-Cracking Phenomena as Viewed from the Aspect of Quenching Stresses.J.Japan Inst.Metals,1961,25(5):360-364.(in Japanese)
• 15Melloy G F.Development of an Improved Forged Hardened-Steel Roll Composition.Iron and Steel Engineer,1965,May:117-126.
• 16Shimoda S.Quench Cracking.Netsu-shori,1965,5(3):166-174.(in Japanese)
• 17Toshioka T,Fukagawa M and Saiga Y.Computation of Internal Stress for Steel Bar during and after Quenching.Tetsu-to-Hagane,1971,57(14):2230-2242.(in Japanese)
• 18Kunitake T and Sugisawa S.The Quench-Cracking Susceptibility of Steel.The Sumitomo Search,1971,5,May:16-25.
• 19Mikita Y,Kawano Y,Nakabayashi I,Mori T and Sakamaki K.Shape Effects of the Test Piece on Quench Crack Susceptibility.Bull.Facl.Eng.Univ.Tokushima,1988,33:39-49.(in Japanese)
• 20Mikita Y,Nakabayashi I and Sakamaki K.How Quench Conditions Affect Cracking in Tapered Cylinders.Heat Treating,1989,Dec.:21-24.
• 21Narazaki M,Fuchizawa S and Kogawara M.Effects of Surface Roughness and Surface Texture on Quench Cracking of Steel.Netsu-shori,1993,33(1):56-63.(in Japanese)
• 22Owaku S.Criterion of Quench Cracking-Its Sources and Prevention.Netsu-shori,1990,30(2):63-67.(in Japanese)
• 23Arimoto K,Lambert D and Wu W T.Finite Element Analysis of Internal Stresses in Quenched Steel Cylinders.Midea S J and Paffmann G D Eds.Proceedings of the19th Heat Treating Conference,Cincinnati:ASM International,1999,425-434.
• 24Denis S,Gautier E,Simon A and Beck G.Stress-Phase Transformation Interactions-Basic Principles,Modelling,and Calculation of Internal Stresses.Mats.Sci.Tech.,1985,1:805-814.
• 25Rammerstorfer F G,Fischer D F,Mitter W,Bathe K J and Snyder M D.On Thermo-Elastic-Plastic Analysis of Heat-Treatment Processes Including Creep and Phase Changes.Computer and Structures,1981,13:771-779.
• 26Narazaki M,Kogawara M,Shirayori A and Fuchizawa S.Accuracy of Evaluation Methods for Heat Transfer Coefficients in Quenching.In Wallis R A and Walton H W,Eds.Proceedings of the18th Heat Treating Conference.Rosemont:ASM International,1998,509-517.
• 27The British Iron and Steel Research Association.Physical Constants of Some Commercial Steels at Elevated Temperatures.1953,London:Butterworths Scientific Publications.
• 28Kunitake T and Ohtani H.Calculating the Continuous Cooling Transformation Characteristics of Steel from Its Chemical Composition.The Sumitomo Search,1969,2,Nov.:18-21.
• 29Koistinen D P and Marburger R E.A General Equation Prescribing the Extent of the Austenite-Martensite Transformation in Pure Iron-Carbon Alloys and Plain Carbon Steels.Acta Met.,1959,7:59-60.
• 30lijima K.The Effect of Austenitizing Condition on Hardenability and on Mechanical Properties of Hardened Carbon Steel.J.Japan Inst.Metals,1962,26(7):412-416.(in Japanese)
• 31lijima K.The Effects of Austenitizing Temperature,Carbon Content and Subzero Treatment on the Mechanical Properties of Hardened Steels.J.Japan Inst.Metals,1965,
• 29(12):1227-1233.(in Japanese)
• 32Grange R A and Stewart H M.The Temperature Range of Martensite Formation.Trans.AIME,1946,167:467-501.
• 33Harris W J and Cohen M.Stabilization of the Austenite-Martensite Transformation.Trans.AIME,1949,180:447-470.
• 34Max-Planck-Institute for Iron Research.Atlas to Heat Treatment of Steel.Vol.1,1954,Dusseldorf:Verlag Stahleisen mbH.(in German)
• 35Fujisawa M.Residual Stresses of Quenching of Steel Cylinders(2nd Report).J.Japan Inst.Metals,1954,18(9):513-516.(in Japanese)
• 36Inoue T,Haraguchi K and Kimura S.Stress Analysis during Quenching and Tempering.J.Soc.Mat.Sci.Japan,1976,25(273):521-526.(in Japanese)
• 37Inoue K,Sugimoto M,Horikawa T,Maeda H,Minakawa N,Moriai A,Kamiyama T and Ikuta F.Neutron Diffraction Study of Residual Stress in the Induction Hardened S45C Round Bar.In Akiniwa Y,Kimur H and Tanaka K,Eds.Proceedings of International Conference on Advanced Technology in Experimental Mechanics2003,Nagoya:JSME-MMD,2003,Paper No.OS04W0182.

文章评论(Comment)：