李志超,陈银莉,左茂方,米振莉

• 1:北京科技大学冶金工程研究院
• 2:山钢集团淄博张钢有限公司

摘要(Abstract)：

利用EBSD技术对CGO硅钢热轧、中间退火、脱碳退火及二次再结晶退火组织及织构进行分析,研究了CGO硅钢各阶段加工制备过程中高斯{110}<001>晶粒的形状、尺寸及分布特点,分析了高斯取向晶粒在各工序过程中的遗传继承性特点。结果表明,CGO硅钢热轧板的次表层存在Goss取向晶粒,历经一次冷轧及中间退火后Goss取向晶粒基本消失,一次再结晶之后Goss织构仍不是主要织构,主要织构为{111}<110>和{111}<112>,说明Goss取向晶粒在二次再结晶退火前数量及尺寸上并不占优势,二次再结晶过程中Goss取向晶粒异常长大形成锋锐Goss织构。{111}<110>和{111}<112>织构组分的强度在一次冷轧中不断增加,{111}<112>织构组分的强度在二次冷轧后达到最大而{111}<110>织构组分是在初次再结晶后变强。

关键词(KeyWords)： CGO硅钢;EBSD;织构遗传;单个取向分析

Abstract:

Keywords:

基金项目(Foundation): 北京科技大学中央高校基本科研业务费(FRF-TP-12-139A)

作者(Author): 李志超,陈银莉,左茂方,米振莉

DOI: 10.13289/j.issn.1009-6264.2014.10.024

参考文献(References)：

• [1]何忠治.电工钢[M].北京:冶金工业出版社,1996.
• [2]May J E,Turnbull D.Secondary recrystallization in silicon iron[J].Transactions of the Metallurgical Society of AIME,1958,212(12):769-781.
• [3]Hayakawa Y,Kurosawa M.Orientation relationship between primary and secondary recrystallized texture in electrical steel[J].Acta Materialia,2002,50(18):4527-4535.
• [4]Hayakawa Y,Szpunar J A.The role of grain boundary character distribution in secondary recrystallization of electrical steels[J].Acta Mater,1997,45(3):1285-1295.
• [5]Lin P,Palumbo G,Harase J,et al.Coincidence site lattice(CSL)grain boundaries and Goss texture development in Fe-3%Si alloy[J].Acta Materialia,1996,44(12):4677-4683.
• [6]Hayakawa Y,Muraki M,Szpunar J A.The changes of grain boundary character distribution during the secondary recrystallization of electrical steel[J].Acta Mater,1998,46(3):1063-1073.
• [7]李志超,杨平,崔凤娥,等.取向硅钢二次再结晶行为分析[J].电子显微学报,2010,29(1):709-715.LI Zhi-chao,YANG Ping,Cui Feng-e,et al.Analysis on the secondary recrystallization in grain oriented silicon steel[J].Journal of Chinese Electron Microscopy Society,2010,29(1):709-715.
• [8]Harase J,Shimizu R,Dingley D J.Texture evolution in the presence of precipitates in Fe-3%Si alloy[J].Acta Materialia,1991,39(5):763-770.
• [9]Yoshitomi Y,Iwayama K,Nagashima T.Coincidence grain boundary and role of inhibitor for secondary recrystallization in Fe-3%Si alloy[J].Acta Metall Materialia,1993,41(5):1577-1585.
• [10]Harase J,Shimizu R.Texture evolution by grain growth in the presence of MnS and AlN precipitates in Fe-3%Si alloy[J].Acta Metall Materialia,1990,38(8):1395-1403.
• [11]Hayakawa Y,Szpunar J A.A new model of Goss texture development during secondary recrystallization of electrical steel[J].Acta Mater,1997,45(11):4713-4720.
• [12]米振莉,周园园,李志超,等.热变形温度对3%SiCGO硅钢组织和织构的影响[J].材料热处理学报,2014,35(5):143-147.MI Zhen-li,ZHOU Yuan-yuan,LI Zhi-chao,et al.Influence of thermal deformation temperature on microstructure and texture of 3%Si CGO silicon steel[J].Transactions of Materials and Heat Treatment,2014,35(5):143-147.

文章评论(Comment)：