BRUNATTO,Silvio Francisco,MUZART,Joel Louis Rene

• 1:Department of Mechanical Engineering
• 2: UFPR
• 3: 81531-990
• 4: Curitiba-PR

摘要(Abstract)：

关键词(KeyWords)：

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): BRUNATTO,Silvio Francisco,MUZART,Joel Louis Rene

参考文献(References)：

• 1. Johnson D.L., Sanderson W.B., Knowlton J.M., Kemer E.L. and Chen M.Y. Advances in Plasma Sintering of Alumina. Sci. Sintering, 1988, 20 (2/3): 109-113.
• 2. Page R.A., Spooner S., Sanderson W.B. and Johnson D.L. Pore Evolution During Glow Discharge Sintering of Alumina. J. Am. Ceram. Soc., 1988,71 (12): 1125-1129.
• 3. Bengisu M. and Inal O.T. J. . Sintering of MgO and MgO-TiC Ceramics by Plasma, Microwave and Conventional Heating. Mater. Sci., 1994, 29: 5475-5480.
• 4. Su H. and Johnson D.L. J. Sintering of Alumina in Microwave-Induced Oxigen Plasma. Am. Ceram. Soc., 1996, 79 (12): 3199-3210.
• 5. Tandian N.P. and Pfender E. Heat Transfer in RF Plasma Sintering: Modeling and Experiments. Plasma Chem. Plasma Proc., 1997,17 (3): 353-370.
• 6. Park Y.S. and McNallan M.J. Chemical Reactions in Mullite Matrix SiC Whisker Reinforced Composites in RF Plasma. J. Mater. Sci., 1997, 32: 523-528.
• 7. Groza J.R., Risbud S.H. and Yamazaki K. J. Mater. Res., 1992,7 (10): 2643-.
• 8. Mishra R.S., Schneider J.A., Shackelford J.F. and Mukherjee A.K. Nanostruct. Mater., 1995,5 (5): 525.
• 9. Ye L.L., Liu Z.G., Raviprasad K., Quan M.X., Umemoto M. and Hu Z.Q. Mater. Sci. Eng. A, 1998, 241: 290-.
• 10. Takeuchi T., B6tourn6 E., Tabuchi M., Kageyama H., Kobayashi Y., Coats, A. Morrison F., Sinclair D.C. and West A.R. J. Mater. Sci. 1999, 34: 917-.
• 11. Takeuchi T., Tabuchi M. and Kageyama H. J. Am. Ceram. Soc., 1999, 82 (4): 939-.
• 12. Murakami T., Komatsu M., Kitahara A., Kawahara M., Takahashi Y. and Ono Y. Intermetallics, 1999, 7: 731-.
• 13. Matsumoto A., Katoh K. and Andoh K. . Research and Development of Novel Materials by Plasma Discharge Sintering Process. Corr. Eng., 1995, 44: 751-766.
• 14. Muzart J.L.R., Batista V.J., Franco C.V. and Klein A.N. Plasma Sintering of AISI 316L Stainless Steel: The influence of the Processing Cycle on the Sample Density. Adv. Powder Metall. Particul. Mater., 1997, 3: 77-84.
• 15. Batista V.J., Binder R., Klein A.N. and Muzart J.L.R. Sintering Iron Using an Abnormal Glow Discharge. Int. J. Powder Metall., 1998, 34 (8): 55-62.
• 16. Batista V.J., Mafra M., Muzart J.L.R., Klein A.N. and Back N. Mater. Sci. Forum 1999,299 (3): 249-.
• 17. Chapman B. In: Glow Discharge Processes: Sputtering and Plasma Etching, Wiley, New York, 1980.
• 18. von Engel A. In: Ionized Gases, AIP Press, Woodbury, NY 1994.
• 19. Benda M., Vlcek J., Cibulka V. and Musil J. . Plasma Nitriding Combined With a Hollow Cathode Discharge Sputtering at High Pressures. J. Vac. Sci. Technol. A, 1997,15 (5): 2636-2643.
• 20. Terakado K., Urao R. and Ohmori M. Simultaneous Plasma Treatment for Carburising and Carbonitriding using Hollow Cathode Discharge. Metall. Mater. Trans. A, 1996, 27A: 401-405.
• 21. Simon C, Heuraux S., Michel H., Bougdira J. and Fabry M. Materials Effect of Titanium and Titanium Alloys on Hollow Cathode Discharge Characteristics. J. Phys. D: Appl. Phys., 1991, 24: 672-676.
• 22. Simon C., Heuraux S., Michel H., Belmahi M., Petal B. and Remy M. Influence of the Phase Transformation of a Metal on Hollow Cathode Discharge Characteristics. Materials Science and Engineering A, 1991,139: 29-32.
• 23. Maliska, A. M., et alii. Influence of Oxygen in a Plasma Nitriding Process. Journal of Materials Science, 1997, 32: 6375-6382.
• 24. Amemiya, H., Ogawa K. Characteristics of a Hollow-Cathode Discharge Containing Negative Ions. J. Phys. D: Appl. Phys., 1997, 30: 879-888.
• 25. Ricard, A. Reactive Plasmas. 1st ed., Paris, Franca, Soci6t6 Francaise du Vide, 1996.
• 26. Fontana, L. C. "Estudo da Deposicao de Filmes de Ti e TiN e Desenvolvimento do Sistema Modificado Triodo Magnetron-Sputtering", Ph.D.Thesis, CPGEM, UFSC, Florian6polis - SC - Brazil, 1997 (in Portuguese).

文章评论(Comment)：