陈艳芳,谢敬佩,苌清华,马窦琴

• 1:河南科技大学材料科学与工程学院
• 2:有色金属共性技术河南省协同创新中心

摘要(Abstract)：

钼粉是制备钼及钼合金制品的原材料,钼粉的质量对钼制品有着重要的影响。而钼粉的质量与钼粉的制备技术息息相关。本文在查阅大量文献的基础上综述了钼粉制备技术的研究进展。主要介绍了传统钼粉、纳米钼粉、高纯钼粉及球形钼粉的应用领域、制备现状及存在的问题。

关键词(KeyWords)： 钼粉;制备技术;研究进展

Abstract:

Keywords:

基金项目(Foundation): 河南省科技厅重点攻关项目(182102210047);河南省科技厅重点攻关项目(192102210008)

作者(Author): 陈艳芳,谢敬佩,苌清华,马窦琴

DOI: 10.13289/j.issn.1009-6264.2020-0034

参考文献(References)：

• [1] Chen G Q,Liu J P,Shu X,et al.Study on microstructure and performance of molybdenum joint welded by electron beam[J].Vacuum,2016,154:1-5.
• [2] Scapin M,Peroni L,Carra F.Investigation and mechanical modeling of pure molybdenum at high strain-rate and temperature[J].Journal of Dynamic Behavior Materials,2016,2:460-475.
• [3] Zhou Y C,Gao Y M,Wei S Z,et al.Preparation and properties of high-strength molybdenum alloy sheets doped with Al2O3 particles[J].Rare Metals,2018,37(12):1046-1054.
• [4] Duan B H,Zhang Z,Wang D Z,et al.Microwave sintering of Mo nanopowder and its densification behavior[J].Transactions of Nonferrous Metals Society of China,2019,29:1705-1713.
• [5] Tran R,Xu Z H,Zhou N X,et al.Computational study of metallic dopant segregation and embrittlement at molybdenum grain boundaries[J].Acta Materialia,2016,117:91-99.
• [6] 张琦飞,王爱琴,谢敬佩,等.纯钼双道次热变形行为[J].材料热处理学报,2019,40(10):65-71.ZHANG Qi-fei,WANG Ai-qin,XIE Jing-pei,et al.Double-pass hot deformation behavior of pure molybdenum[J].Transactions of Materials and Heat Treatment,2019,40(10):65-71.
• [7] Lee B K,Oh J M,Shon I J,et al.Influence of oxygen concentration on mechanical properties of molybdenum powder during sintering[J].Journal of Nanoscience and Nanotechnology,2014,14:9029-9032.
• [8] Lee B K,Oh J M,Choi G S,et al.Preparation of ultra-high purity cylindrical Mo ingot by electron beam drip melting[J].Materials Transactions,2013,54:238-241.
• [9] Chaudhuri A,Sarkar A,Suwas S.Investigation of stress-strain response,microstructure and texture of hot deformed pure molybdenum[J].International Journal of Refractory Metals and Hard Materials,2018,73:168-182.
• [10] Chen C,Wang S,Jia Y L,et al.The effect of texture and microstructure on the properties of Mo bars[J].Materials Science and Engineering A,2014,601:131-138.
• [11] Meng B,Wan M,Wu X D,et al.Constitutive modeling for high-temperature tensile deformation behavior of pure molybdenum considering strain effects[J].Journal of Refractory Metals and Hard Materials,2014,45:41-47.
• [12] Chen C,Wang S,Jia Y L,et al.The microstructure and texture of Mo-La2O3 alloys with high transverse ductility[J].Journal of Alloys and Compounds,2014,589:531-538.
• [13] Primig S,Clemens H,Knabl W,et al.Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum[J].International Journal of Refractory Metals and Hard Materials,2015,48:179-186.
• [14] 吴贤,张健,康新婷,等.钼粉的制备技术及研发现状[J].稀有金属材料与工程,2007,36(3):562-566.WU Xian,ZHANG Jian,KANG Xin-ting,et al.Preparation technology and development status of molybdenum powder[J].Rare Materials and Engineering,2007,36(3):562-566.
• [15] 夏明星,郑欣,王峰,等.钼粉制备技术及研究现状[J].中国钨业,2014,29(4):46-48.XIA Ming-xing,ZHENG Xin,WANG Feng,et al.Preparation technology and research status of molybdenum powder[J].China Tungsten Industry,2014,29(4):46-48.
• [16] 赵宝华,朱琦,王林,等.钼及钼复合材料理论与实践[M].西安:西北工业大学出版社,2013.
• [17] Huang H S,Lin Y C,Hwang K S.Effect of lubricant addition on the powder properties and compacting performance of spray-dried molybdenum powders[J].International Journal of Refractory Metals & Hard Materials,2002,20:175-180
• [18] Dang J,Zhang G H,Chou K C.A morphological study of the reduction of MoO2 by Hydrogen[J].High Temperature Materials and Processes,2015,34(5):417-424.
• [19] 尹周澜,唐杰雄,赵秦生,等.钼酸铵和三氧化钼氢还原性质的研究[J].稀有金属,1997,21(5):326-329.YIN Zhou-lan,TANG Jie-xiong,ZHAO Qin-sheng,et al.Study on hydrogen reduction properties of ammonium molybdate and molybdenum trioxide[J].Rare Metals,1997,21(5):326-329.
• [20] 魏勇,刘心宇,李毅夫,等.钼还原过程相变化研究[J].稀有金属与硬质合金,1996,126:13-18.WEI Yong,LIU Xin-yu,LI Yi-fu,et al.Study on phase change in molybdenum reduction process[J].Rare Metals and Cemented Carbides,1996,126:13-18.
• [21] Martins G P,Kangsadan T,Scott G,et al.A 21st.century perspective on molybdenum powder production by hydrogen reduction[J].Materials Science Forum,2007,561-565:447-452.
• [22] Bolitschek J,Luidold S,O’Sullivan M.A study of the impact of reduction conditions on molybdenum morphology[J].International Journal of Refractory Metals and Hard Materials,2018,71:325-329.
• [23] Sun Y J,Xie H,Sun J.Influence of ammonium molybdate precursor on Mo powder preparation and working properties[J].Materials Science and Engineering A,2008,483-484:168-171.
• [24] 程仕平.高性能钼粉与烧结钼的制备及机理研究[D].长沙:中南大学,2007.CHENG Shi-ping.Study on preparation and mechanism of high performance molybdenum powder and sintered molybdenum [D].Changsha:Central South University,2007.
• [25] Spevack P A,Mcintyre N S.Thermal reduction of molybdenum trioxide[J].Journal of Chemical Physics,1992,96:9029-9035.
• [26] S?oczyński J.Kinetics and mechanism of molybdenum (VI) oxide reduction[J].Journal of Solid State Chemistry,1995,118:84-92.
• [27] Majumdar S,Sharma I G,Samajdar I,et al.Kinetic studies on hydrogen reduction of MoO3 and morphological analysis of reduced Mo powder[J].Metallurgical and Materials Transactions B,2008,39:431-438.
• [28] Leisegang T,Levin A A,Walter J,et al.In situ X-ray analysis of MoO3 reduction[J].Crystal Research and Technology,2005,40:95-105.
• [29] Schulmeyer W V,Ortner H M.Mechanisms of the hydrogen reduction of molybdenum oxides[J].International Journal of Refractory Metals and Hard Materials,2002,20:261-269.
• [30] Lalik E,David W,Barnes P,et al.Mechanisms of reduction of MoO3 to MoO2 reconciled[J].Journal of Physical Chemistry B,2001,105:9153-9156.
• [31] Enneti R K,Wolfe T A.Agglomeration during reduction of MoO3[J].International Journal of Refractory Metals and Hard Materials,2012,31:47-50.
• [32] Enneti R K.Rate control mechanism for the hydrogen reduction of MoO3 to MoO2[J].International Journal of Refractory Metals & Hard Materials,2012,33:122-123.
• [33] Dang J,Zhang G H,Chou K C,et al.Kinetics and mechanism of hydrogen reduction of MoO3 to MoO2[J].International Journal of Refractory Metals & Hard Materials,2013,41:216-223.
• [34] S?oczynski J.Kinetics and mechanism of MoO3 reduction comments on “In situ XAS and XRD studies on the formation of Mo suboxides during reduction of MoO3”[J].Journal of Physical Chemistry B,2002,106(31):7718-7718.
• [35] Lalik E.Kinetic analysis of reduction of MoO3 to MoO2[J].Catalysis Today,2011,169:85-92.
• [36] Kim B S,Kim E,Jeon H S,et al.Study on the reduction of molybdenum dioxide by hydrogen[J].Materials Transactions,2008,49:2147-2152.
• [37] Dang J,Zhang G H,Chou K C.Phase transitions and morphology evolutions during hydrogen reduction of MoO3 to MoO2[J].High Temperature and Materials Processes,2014,33:305-312.
• [38] Dang J,Zhang G H,Wang L,et al.Study on hydrogen reduction of Mo4O11 [J].International Journal of Refractory Metals & Hard Materials,2015,51:275-281.
• [39] Ressler T,Jentoft R,Wienold J,et al.In situ XAS and XRD studies on the formation of Mo suboxides during reduction of MoO3[J].Journal of Physical Chemistry B,2000,104(6):360-370.
• [40] Dang J,Zhang G H,Chou K C.Study on kinetics of hydrogen reduction of MoO2[J].International Journal of Refractory Metals and Hard Materials,2013,41:356-362.
• [41] 何凯,田苗苗,韩强,等.高效制备钼粉过程中真空分解炉的研发[J].中国钼业,2019,43(5):39-42.HE Kai,TIAN Miao-miao,HAN Qiang,et al.Development of vacuum decomposition furnace in the process of efficiently preparing molybdenum powder[J].China Molybdenum Industry,2019,43(5):39-42.
• [42] Dao M,Lu L,Asaro R J,et al.Toward a quantitative understanding of mechanical behavior of nanocrystalline metals[J].Acta Materialia,2007,55:4041-4065.
• [43] Ryu T,Sohn H Y,Hwang K S,et al.Chemical vapor synthesis (CVS) of tungsten nanopowder in a thermal plasma reactor[J].International Journal of Refractory Metals and Hard Materials,2009,27:149-154.
• [44] Won C W,Nersisyan H H,Won H I,et al.Refractory metal nanopowders:synthesis and characterization[J].Current Opinion in Solid State and Materials Science,2010,14:53-68.
• [45] Liu G,Zhang G J,Jiang F,et al.Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility[J].Nature Materials,2013,12:344-350.
• [46] Srivatsan T S,Ravi B G,Petraroli M,et al.The microhardness and microstructural characteristics of bulk molybdenum samples obtained by consolidating nanopowders by plasma pressure compaction[J].International Journal of Refractory Metals and Hard Materials,2002,20:181-186.
• [47] Kim S H,Kim D G,Min S P,et al.Sintering kinetics analysis of molybdenum nanopowder in a non-isothermal process[J].Metals and Materials International,2011,17:63-66.
• [48] Liu B H,Gu H C,Chen Q L.Preparation of nanosized Mo powder by microwave plasma chemical vapor deposition method[J].Materials Chemistry and Physics,1999,59:204-209.
• [49] Saghafi M,Heshmati-Manesh S,Ataie A,et al.Synthesis of nanocrystalline molybdenum by hydrogen reduction of mechanically activated MoO3[J].International Journal of Refractory Metals and Hard Materials,2012,30:128-132.
• [50] Wang L,Zhang G H,Chou K C.Synthesis of nanocrystalline molybdenum powder by hydrogen reduction of industrial grade MoO3[J].International Journal of Refractory Metals and Hard Materials,2016,59:100-104.
• [51] Sun G D,Zhang G H,Chou K C.Preparation of Mo nanoparticles through hydrogen reduction of commercial MoO2 with the assistance of molten salt[J].International Journal of Refractory Metals and Hard Materials,2019,78:68-75.
• [52] Huang Z,Liu J H,Deng X G,et al.Low temperature molten salt preparation of molybdenum nanoparticles[J].International Journal of Refractory Metals and Hard Materials,2016,54:315-321.
• [53] 张国华,孙国栋.一种制备高纯纳米钼粉的方法:中国,110227826 A [P].2019-9-13.
• [54] Hoseinpur A,Bafghi M S,Khaki J V,et al.A mechanistic study on the production of nanosized Mo in microwave assisted combustive reduction of MoO3 by Zn[J].International Journal of Refractory Metals and Hard Materials,2015,50:191-196.
• [55] 刘光跃.高纯度钨粉和钼粉的制造方法[J].钨钼材料,1995(2):22-26.LIU Guang-yue.Manufacturing method of high purity tungsten powder and molybdenum powder[J].Tungsten and Molybdenum Materials,1995(2):22-26.
• [56] 罗丽.高纯钼粉的制造方法[J].钨钼材料,1995(3):18-19.LUO Li.Manufacturing method of high purity molybdenum powder[J].Tungsten and Molybdenum Materials,1995(3):18-19.
• [57] 张文钲.德国钼业的创新与发展[J].中国钼业,2012,36(1):10-14.ZHANG Wen-zheng.Innovation and development of molybdenum industry in Germany[J].China Molybdenum Industry,2012,36(1):10-14.
• [58] 谭兴龙,戴煜,羊建高.一种高纯钼粉的制备方法:中国,102632245 B[P].2014-08-06.
• [59] 宋爱谋,钟小亮.高纯钼粉及其制备方法:中国,103736991 [P].2016-03-30.
• [60] 赵鸿雁,冯建中,黄伟,等.等离子体法制备喷涂用球形钼粉技术初探[J].兵器材料科学与工程,2013,36(1):99-100.ZHAO Hong-yan,FENG Jian-zhong,HUANG Wei,et al.Preparation of spherical molybdenum powder for spraying by continuous induction plasma[J].Ordnance Material Science and Engineering,2013,36(1):99-100.
• [61] 刘晓平,王快社,胡平,等.感应等离子体工艺对制备球形钼粉的影响[J].金属热处理,2015,40(10):76-80.LIU Xiao-ping,WANG Kuai-she,HU Ping,et al.Effect of induction plasma process on preparation of dense spherical molybdenum powder[J].Heat Treatment of Metals,2015,40(10):76-80.
• [62] 刘晓平,王快社,胡平,等.感应等离子体制备高纯致密球形钼粉研究[J].稀有金属材料与工程,2016,45(5):1325-1329.LIU Xiao-ping,WANG Kuai-she,HU Ping,et al.Preparation of dense spherical molybdenum powder with high purity via induction plasma[J].Rare Metal Materials and Engineering,2016,45(5):1325-1329.
• [63] 庄飞,付静波,杨秦莉.雾化造粒钼粉烧结过程研究[J].中国钼业,2019,43(3):58-60.ZHUANG Fei,FU Jing-bo,YANG Qin-li.Sintering process of spray granulation molybdenum powder[J].China Molybdenum Industry,2019,43(3):58-60.
• [64] 盛艳伟,郭志猛,郝俊杰,等.射频等离子体制备球形Mo粉的研究[J].粉末冶金工业,2012,21(6):6-10.SHENG Yan-wei,GUO Zhi-meng,HAO Jun-jie,et al.Characterization of spherical molybdenum powders prepared by RF plasma processing[J].Powder Metallurgy Industry,2012,21(6):6-10.
• [65] 赵盘巢,易伟,陈家林.喷雾干燥结合微波煅烧氢还原法制备微米级球形钼粉[J].稀有金属材料与工程,2017,46(10):3123-3128.ZHAO Pan-chao,YI Wei,CHEN Jia-lin.Preparation of spherical molybdenum powder by spray drying and microwave calcination hydrogen reduction[J].Rare Metal Materials and Engineering,2017,46(10):3123-3128.
• [66] 操齐高,赵盘巢,郑晶,等.一种高纯微米级球形钼粉的制备方法:中国,110014165 A[P].2019-7-16.

文章评论(Comment)：