张红梅,孙彬斌,贾志伟,乔立峰,许云波,刘振宇,王国栋

• 1:辽宁科技大学
• 2:辽宁科技大学
• 3:辽宁科技大学
• 4:鞍山钢铁公司

摘要(Abstract)：

以热轧Si-Mn系双相钢为研究对象,在实验室通过控制轧制和控制冷却实验,研究了变形工艺参数对高强热轧双相钢显微组织和力学性能的影响。研究表明,具有高密度位错亚晶结构的马氏体形貌和分布对双相钢的力学性能有很大影响,通过控制卷取温度、冷却速度和精轧温度,可以得到不同的微观组织形貌和力学性能的热轧双相钢。

关键词(KeyWords)： Si-Mn系双相钢;组织;变形工艺;力学性能

Abstract:

Keywords:

基金项目(Foundation): 国家自然基金资助项目(50504007)

作者(Author): 张红梅,孙彬斌,贾志伟,乔立峰,许云波,刘振宇,王国栋

参考文献(References)：

• [1]Kato T.Fundamentals of dual-phase steels[C].TMS-AIME,Chicago,February,1981:199-220.
• [2]Waterschoot T,De Cooman B C,Vanderschueren D.Influence of run-out table cooling patterns on transformation and mechanical properties of high strengthdual phase and ferrite-bainite steels[J].Iron-making and Steel-making,2001,28(2):185.
• [3]Bandyopadhyay N R,Datta S.Effect of manganese partitioning on transformation induced plasticity characteristics in microalloyed dual phase steels[J].ISIJInternational,2004,44(5):927-934.
• [4]Zhao H,Rama S C,Bzrber G C,et al.Experimental study of deep drawability of hot rolled IF steel[J].Journal of Materials Processing Technology,2002,58(6):1-7.
• [5]Senum T,Kawasaki K.Texture formation in Ti-bearing IF steel sheets throughoutthe rolling and annealing processes in terms of the influence of hot rollingconditions on deep drawability[J].ISIJ International,1994,1:51-60.
• [6]Gerbase J,Embury J D,Hobbs R M.Structure and properities of dual phase steels[C].Kot R A,Morris J W.TMS/AIME,New York,1979:118.
• [7]Becker J,Hornbogen E,Wendl F.Fundamentals of dual phase steel[C].R A Kot,B L Bramfitt.TMS/AIME,New York,1981:383.
• [8]Buzzichelli G,Anelli E.Present status and perspectives of european research in the field of advanced structural steels[J].ISIJ International,2002,42,(12):1354-1363.
• [9]张国珍,田琮.硅、锰和轧制工艺对双相钢组织性能的影响[J].北京科技大学学报,1994,16,(2):12-15.ZHANG Guo-zhen,TIAN Cong.The effect of Mn and rolling process on propertitise for dual-phase steel[J].Journal of University of Science and TechnologyBeijing,1994,16(2):12-15.

文章评论(Comment)：