蒲春雷,朱国辉,杨树宝

• 1:北京科技大学材料科学与工程学院
• 2:安徽工业大学

摘要(Abstract)：

根据AISI1215钢热模拟压缩实验的结果,采用Poliak和Jonas提出的计算动态再结晶临界应变(εc)和临界应力(σc)方法,研究了形变温度和应变速率对εc和σc的影响规律。结果表明,在应变速度较低时(小于30 s-1),采用指数函数形式可以较好描述热加工参数Z(Zener-Hollomon参数)与εc,σc,εP(峰值应变)和σP(峰值应力)间的关系,实验分析的结果表明,峰值应变(临界应变)与Z参数之间表现为正比关系,Z参数增大(形变温度降低或应变速度增加),材料发生动态再结晶的临界应变增加,应力应变曲线上表现出的表观峰值应变增加。根据模型计算的结果,在实验数据的范围内,动态再结晶临界应变与应力应变曲线的峰值应变之间的比值约为0.4~0.5之间,明显小于一般工程应用中估计的0.7。根据模型的计算的结果,用中断淬火试验进行了验证,结果表明与模型计算值吻合良好。

关键词(KeyWords)： AISI1215钢;动态再结晶临界条件;Z参数

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助(51175003)

作者(Author): 蒲春雷,朱国辉,杨树宝

DOI: 10.13289/j.issn.1009-6264.2014.09.040

参考文献(References)：

• [1]Gao C Y,Zhang L C.Constitutive modelling of plasticity of fcc metals under extremely high strain rates[J].International Journal of Plasticity,2012,32:121-133.
• [2]金泉林.铝合金6061的热变形力学行为与微观组织演化规律[J].材料热处理学报,2011,32(6):51-57.JIN Quan-lin.Experimental study on hot deformation behavior and microstructure evolution of aluminum alloy 6061[J].Transactions of Materials and Heat Treatment,2011,32(6):51-57.
• [3]Subramanian S V,Gekonde H O,Zhu G,et al.Role of microstructural softening events in metal cutting[J].Machining Science and Technology,2002,6(3):353-364.
• [4]Solhjoo S.Determination of critical strain for initiation of dynamic recrystallization[J].Materials and Design 2010,31:1360-1364.
• [5]Poliak E I,Jonas J J.Initiation of dynamic recrystallization in constant strain rate hot deformation[J].ISIJ international,2003,43(5):684-691.
• [6]彭建,童小山,吕滨江,等.Mg-6Zn-1Mn镁合金热压缩流变行为及动态再结晶[J].材料热处理学报,2013,34(5):180-185.PENG Jian,TONG Xiao-shan,LBin-jiang,et al.Hot compression deformation behaviour and dynamic recrystallization of Mg-6Zn-1Mn magnesium alloy[J].Transactions of Materials and Heat Treatment,2013,34(5):180-185.
• [7]Wang J,Xiao H,Xie H,et al.Study on hot deformation behavior of carbon structural steel with flow stress[J].Materials Science and Engineering A,2012,539:294-300.
• [8]Mirzadeh H,Cabrera J M,Prado J M,et al.Hot deformation behavior of a medium carbon microalloyed steel[J].Materials Science and Engineering A,2011,528(10):3876-3882.
• [9]夏玉峰,赵磊,余春堂,等.42CrMo钢动态再结晶的临界条件[J].材料热处理学报,2013,34(4):74-79.XIA Yu-feng,ZHAO Lei,YU Chun-tang,et al.Dynamic recrystallization critical conditions of 42CrMo steel[J].Transactions of Materials and Heat Treatment,2013,34(5):74-79.
• [10]Gourdet S,Montheillet F.A model of continuous dynamic recrystallization[J].Acta Materialia,2003,51(9):2685-2699.
• [11]Poliak E I,Jonas J J.A one-parmenter approach to determining the critical conditions for the initiation of dynamic recrystallization[J].Acta Materialia,1996,44(1):127-136.
• [12]Prasad G,Goerdeler M,Gottstein G.Work hardening model based on multiple dislocation densities[J].Materials Science and Engineering A,2005,400:231-233.
• [13]黄光杰,钱宝华,汪凌云,等.AZ31镁合金初始动态再结晶的临界条件研究[J].稀有金属材料与工程,2007,36(12):2080-2084.HUANG Guang-jie,QIAN Bao-hua,WANG Ling-yun,et al.Study on the critical conditions for initial dynamic recrystallization of AZ31 magnesium alloy[J].Rare Metal Materials and Engineering,2007,36(12):2080-2084.
• [14]Mirzadeh H,Najafizadeh A.Prediction of the critical conditions for initiation of dynamic recrystallization[J].Materials&Design,2010,31(3):1174-1179.
• [15]Mirzaee M,Keshmiri H,Ebrahimi G R,et al.Dynamic recrystallization and precipitation in low carbon low alloy steel 26NiCrMoV 14-5[J].Materials Science and Engineering A,2012,551:25-31.

文章评论(Comment)：