高锰奥氏体钢的碳化物沉淀析出行为Precipitation behavior of carbides in a high manganese austenitic steel for magnetic liner
金云学,宋艳萍
摘要(Abstract):
根据磁性衬板对奥氏体钢超高硬度的研发需求,在高锰奥氏体钢中添加适量的碳化物形成元素,经热处理的后采用TEM、SEM、XRD等手段研究了固溶时效态高锰奥氏体钢中碳化物的析出行为,以期获得超高硬度奥氏体钢。结果表明:高锰奥氏体钢在固溶时效状态下,组织中均匀析出大量Cr23C6相,其数量在675℃时效时达到饱和,随后开始长大聚集;时效使材料中大量弥散析出约十几纳米的VC颗粒,弥散的VC颗粒与基体间存在共格界面,存在多种共格关系,这种具有共格界面的纳米VC颗粒对材料硬度提高作用非常明显。
关键词(KeyWords): 高锰奥氏体钢;Thermo-Calc;碳化物;时效;沉淀析出
基金项目(Foundation):
作者(Author): 金云学,宋艳萍
DOI: 10.13289/j.issn.1009-6264.2013.12.025
参考文献(References):
- [1]吴化,徐珊珊.多元变质处理对高锰钢微观结构与性能的影响[J].铸造,2008,57(6):66-68.WU Hua,XU Shan-shan.Effect of multi-modification on microstructure and properties of high manganese steel[J].Foundry,2008,57(6):66-68.
- [2]Efstathiou C,Sehitoglu H.Strengthening hadfield steel welds by nitrogen alloying[J].Materials Science and Engineering,2009,5(6):174-179.
- [3]Moghaddam E G,Varahram N,Davami P.On the comparison of microstructural characteristics and mechanical properties of high-vanadium austenitic manganese steels with the Hadfield steel[J].Materials Science and Engineering A,2012,532:260-266.
- [4]FU Cheng-zhang,FU Rui-dong,LIANG Qiub,et al.Microstructure and property of nitrogen-alloyed high manganese austenitic steel under high strain rate tension[J].Materials Science and Engineering A,2008,492:255-260.
- [5]Bliznuk V V,Gavriljuk V G,Kopitsa G P,et al.Fluctuations of chemical composition of austenite and their consequence on shape momory effect in FeMn-(Si,Cr,Ni,C,N)alloys[J].Acta Materialia,2002,52(16):4791-4799.
- [6]刘嘉斌,舒康颖,刘向海,等.再结晶退火对Fe-24Mn-0.7Si-1.0Al TWIP钢组织和硬度的影响[J],材料热处理学报,2011,32(8):107-111.LIU Jia-bin,SHU Kang-ying,LIU Xiang-hai,et al.Influence of recrystallization annealing on microstructureand hardness of Fe-24Mn-0.7Si-1.0 Al TWIP steel[J].Transactions of Materials and Heat Treatment,2011,32(8):107-111.
- [7]代永娟,米振莉,唐荻,等.退火温度对Fe-Mn-TWIP钢微观结构的影响[J].材料热处理学报,2011,32(3):115-119.DAI Yong-juan,MI Zhen-li,TANG Di,et al.Effect of annealing temperature on microstructure of a Fe-Mn-TWIP steel[J].Transactions of Materials and Heat Treatment,2011,32(3):115-119.
- [8]袁子洲,匡毅,陈彦,等.时效处理对超高锰钢组织及力学性能的影响[J].铸造,2004,53(8):602-605.YUAN Zi-zhou,KUANG Yi,CHEN Yan,et al.Effect of aging treatment on microstructure and mechanical properties of super-high manganese steel[J].Foundry,2004,53(8):602-605.
- [9]Bae D S,Lee S P,Cho Y R,et al.Effect of aging treatment on irradiation-induced segregation of high Mn-Cr steel[J].Nonferrous Met Soc China,2011,21:58-61.
- [10]李鱼飞,罗超,王志刚,等.退火对V-4Cr-4Ti合金微观组织结构的影响[J].稀有金属,2010,34(2):172-177.LI Yu-fei,LUO Chao,WANG Zhi-gang,et al.Effects of annealing on microstructures of V-4Cr-4Ti alloy[J].Chinese Journal of Rare Metals,2010,34(2):172-177.
- [11]黄孝瑛著.材料微观结构的电子显微学分析[M].冶金工业出版社,2008.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||