曹丽琴,轩福贞,王正东,涂善东

• 1:燕山大学环境与化学工程学院
• 2:华东理工大学机械与动力工程学院

摘要(Abstract)：

利用脉冲式Nd:YAG激光在Ti6Al4V合金表面进行激光渗氮处理,借助纳米压痕和划痕试验表征渗氮层的弹塑性力学性能。结果表明,在钛合金表面成功制备了高硬度、高强度、枝晶状分布的渗氮层。同时,渗氮层内硬度、模量、强度以及应力-应变关系、摩擦系数等力学性能呈现出类似于激光渗氮层内氮元素扩散曲线的非均匀性空间分布规律。硬度和弹性模量之比以及纳米划痕试验结果表明,激光渗氮层的抗磨损性能随深度的增加逐渐降低,摩擦系数随着划入深度的增加,从0.2增加到0.4。

关键词(KeyWords)： 激光渗氮;纳米压痕;纳米划痕;力学性能

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(507350001);; 河北省高等学校自然科学研究指导项目(Z2011120);; 上海市重点学科建设项目(B503)

作者(Author): 曹丽琴,轩福贞,王正东,涂善东

DOI: 10.13289/j.issn.1009-6264.2011.11.030

参考文献(References)：

• [1]高昕,宋宙模.Ti表面脉冲激光氮化成膜温度场的数值模拟[J].激光杂志,2000,21(2):62-63.GAO Xin,SONG Zhou-mo.Numerical simulation of laser gas alloying for TiN films generated on titanium surface[J].Laser Journal,2000,21(2):62-63.
• [2]张春华,张松,文效忠,等.Ti6Al4V合金的激光气体氮化[J].光电子激光,2004,15(8):946-950.ZHANG Chun-hua,ZHANG Song,MAN Hau-chung,et al.Laser gas nitriding of Ti6Al4V alloy[J].Optoelectronics Laser,2004,15(8):946-950.
• [3]Schaaf P.Laser Nitriding of Metals[J].Prog Mater Sci,2002,47:1-161.
• [4]Abboud J H,Fidel A F,Benyounis K Y.Surface nitriding of Ti-6Al-4V alloy with a high power CO2 laser[J].Opt Laser Technol,2008,40:405-414.
• [5]Biswas A,Li L,Chatterjee U K,et al.Mechanical and electrochemical properties of laser surface nitrided Ti-6Al-4V[J].Scr Mater,2008,59:239-242.
• [6]Razavi R S,Salehi M,Monirvaghefi M,et al.Corrosion behaviour of laser gas-nitrided Ti-6Al-4V alloy in nitric acid solution[J].J Mater ProcessTechnol,2008,203:315-320.
• [7]Vadiraj A,Kamaraj M,Gnanamoorthy R.Fretting wear studies on uncoated,plasma nitrided and laser nitrided biomedical titanium alloys[J].MaterSci Eng A,2007,445-446:446-453.
• [8]Cui Z D,Zhu S L,Man H C,et al.Microstructure and wear performance of gradient Ti/TiN metal matrix composite coating synthesized using a gasnitriding technology[J].Surface and Coatings Technology,2005,190:309-313.
• [9]Dao M,Chollacoop N,Van Vlief K J,et al.Computational modeling of the forward and reverse problems in instrumented sharp indentation[J].ActaMater,2001,49:3899-3918.
• [10]Giannakopoulos A E,Suresh S.Determination of elastoplastic properties by instrumented sharp indentation[J].Scr Mater,1999,40:1191-1198.
• [11]张泰华.微纳米力学性能测试技术及其应用[M].北京:机械工业出版社,2004.
• [12]Chollacoop N,Dao M,Suresh S.Depth-sensing instrumented indentation with dual sharp indenters[J].Acta Mater,2003,51:3713-3729.
• [13]Xuan Fu-Zhen,Cao Li-Qin,Wang Zhengdong,et al.Mass transport in laser surface nitriding involving the secondary effect due to high temperaturegradient:simulation and experiment[J].Comput Mater Sci,2010,49:104-111.
• [14]Man H C,Zhao N Q.Surface morphology of a laser surface nitrided and etched Ti-6Al-4V alloy[J].Surface and Coatings Technology,2005,192:341-346.
• [15]Wen S P,Zong R L,Zeng F,et al,Nanoindentation and nanoscratch behaviors of Ag/Ni multilayers[J].Appl Surf Sci,2009,255:4558-4562.
• [16]Leyland A,Matthews A.On the significance of the H/E ratio in wear control:A nanocomposite approach to optimised tribological behaviour[J].Wear,2000,246:1-11.
• [17]Ni Wangyang,Cheng Yang-Tse,Lukitsch M J,et al.Effects of the ratio of hardness to Young's modulus on the friction and wear behavior of bilayercoatings[J].Applied Physics Letters,2004,85(18):4028-4030.
• [18]Lafaye S,Troyon M.On the friction behaviour in nanoscratch testing[J].Wear,2006,261:905-913.
• [19]Huang L Y,Lu J,Xu K W.The nano-scratch behaviour of different diamond-like carbon film-substrate systems[J].J Phys D:Appl Phys,2004,37:2135-2139.

文章评论(Comment)：