田晓东,郭喜平

• 1:西北工业大学凝固技术国家重点实验室

摘要(Abstract)：

利用包埋渗法在新型铌基超高温合金表面制备了铝改性的硅化物抗氧化涂层,分析了涂层的相组成、结构及其组织形成过程。涂层制备采用先在1150℃包埋渗硅4h,然后再于800~1000℃包埋渗铝4h的方法。结果表明:渗硅后涂层的相组成为(Nb,X)Si2(X代表Ti,Cr和Hf元素);再于各温度包埋渗铝后,(Nb,X)Si2层中的平均铝含量随包埋渗铝温度的升高而增加,最高可达10.84at%;当包埋渗铝温度为860~1000℃时会在渗硅层与基体间形成新的铌铝金属间化合物层,且渗入(Nb,X)Si2层中的铝会在局部形成Nb3Si5Al2相。

关键词(KeyWords)： 铌基超高温合金;包埋渗;铝改性硅化物涂层;涂层结构

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(50671081);; 教育部新世纪优秀人才支持计划资助项目

作者(Author): 田晓东,郭喜平

参考文献(References)：

• [1]Bewlay B P,Jackson M R,Zhao J C,et al.A review of very-high-temperature Nb-silicide-based composites[J].Metallurgical and Materials Transactions A,2003,34:2043-2052.
• [2]Subramanian P R,Mendiratta M G,Dimiduk D M,et al.Advanced intermetallic alloys-beyond gamma titanium aluminides[J].Materials Science andEngineering A,1997,239-240:1-13.
• [3]Sarath E,Menon K,Madan G,et al.High temperature oxidation in multi-component Nb alloys[J].Material Science Forum,2005,475-479:717-720.
• [4]Nicholls J R.Advances in coating design for high-performance gas turbines[J].MRS Bulletin,2003,9:659-670.
• [5]肖来容,易丹青,殷磊,等.铌及铌合金高温涂层研究进展[J].材料导报,2004,18(1):13-15.XIAO Lai-rong,YI Dan-qing,YIN Lei,et al.Progress in research on high temperature protective coating of Nb and Nb-based alloys[J].Materials Review,2004,18(1):13-15.
• [6]王禹,郜嘉平,李云鹏,等.铌合金硅化物涂层的结构及抗氧化性[J].无机材料学报,2000,15:143-149.WANG Yu,GAO Jia-ping,LI Yun-peng,et al.Microstructure and oxidation-resistance of silicide coatings on C-103 niobium alloys[J].Journal of InorganicMaterials,2000,15:143-149.
• [7]XIANG Z D,Datta P K.Deposition of Silicon modified aluminide coatings on nickel base superalloys by pack cementation process[J].Materials Science andTechnology,2003,19:935-942.
• [8]XIANG Z D,Rose S R,Burnell-Gray J S,et al.Co-deposition of aluminide and silicide coatings on-γTiAl by pack cementation process[J].Journal ofMaterials Science,2003,38:19-28.
• [9]ZHOU Chun-gen,XU Hui-bin,GONG Sheng-kai,et al.A study on aluminide and Cr-modified aluminide coatings on TiAl alloys by pack cementation method[J].Surface and Coatings Technology,2000,132:117-123.
• [10]Chiara Milanese,Vincenzo Buscaglia,Filippo Maglia,et al.Reactive growth of niobium silicides in bulk diffusion couples[J].Acta Materialia,2003,51:4837-4846.
• [11]ZHAO J C,Peluso L A,Jackson M R,et al.Phase diagram of the Nb-Al-Si ternary system[J].Journal of Alloys and Compounds,2003,360:183-188.
• [12]Hellwig A,Palm M,Inden G.Phase equilibria in the Al-Nb-Ti system at high temperatures[J].Intermetallics,1998,6:79-94.
• [13]李明,宋力昕,乐军,等.铌表面固体粉末包埋渗硅研究[J].无机材料学报,2005,3(20):764-767.LI Ming,SONG Li-xin,LE Jun,et al.Microstructure and mechanism of pack siliconizing on niobium[J].Journal of Inorganic Materials,2005,3(20):764-767.
• [14]Fernandes P B,Coelho G C.Thermodynamic modeling of the Nb-Si system[J].Intermetallics,2002,10:993-999.
• [15]Majumdar S,Sengupta P,Kale G B,et al.Development of multilayer oxidation resistant coatings on niobium and tantalum[J].Surface and CoatingsTechnology,2006,200:3713-3718.

文章评论(Comment)：