聂波,尹志民,姜锋,蒋春丽,丛福官

• 1:中南大学材料科学与工程学院
• 2:中南大学材料科学与工程学院
• 3:中南大学材料科学与工程学院
• 4:中南大学材料科学与工程学院

摘要(Abstract)：

采用半连续铸造-轧制技术制备了铝镁钪合金板材,研究了稳定化退火工艺对冷轧板材组织和性能的影响。结果表明,随稳定化退火温度的升高,板材强度下降而塑性升高,腐蚀抗力则先升而后降;随稳定化退火时间的延长,板材屈服强度有所降低而塑性变化不大,腐蚀抗力稍有增加。合金板材经300℃×1h稳定化退火可达到强度、塑性和耐蚀性的最佳配合。

关键词(KeyWords)： 铝镁钪合金;稳定化处理;拉伸性能;剥落腐蚀;腐蚀速率

Abstract:

Keywords:

基金项目(Foundation): 国家“十五”攻关项目(MKPT-2004-16ZD)

作者(Author): 聂波,尹志民,姜锋,蒋春丽,丛福官

参考文献(References)：

• [1]Panker B A.The effect of small addition of scandium on the properties of aluminum alloy[J].Journal of Materials Science,1995,30(2):452-458.
• [2]YU A,Filatov.New Al-Mg-Sc alloy[J].Material Science and Engineering A,2000,289(1):97-101.
• [3]Zaki Ahmad.The corrosion behavior of scandium alloying A15052 in neutral sodium chloride solution[J].Corrosion Science,2001,43:1227-1243.
• [4]Davydov V G.Scientific principles making an alloying addition of Scandium to aluminum alloys[J].Materials Science and Engineering,2000,280(1):30-36.
• [5]王祝堂,田荣璋.铝合金及其加工手册[M].长沙:中南大学出版社,2005,292.
• [6]肖亚庆.铝加工实用技术手册[M].北京:冶金工业出版社,2005,151.
• [7]孟力平,柏振海,罗兵辉.Mg、Sc含量和稳定化退火温度对Al-Mg-Sc合金组织及性能的影响[J].矿冶工程,2003,23(4):84-86.MENG Li-ping,BAI Zhen-hai,LUO Bing-hui.Efects of Mg,Sc and annealing temperature on Al-Mg-Sc alloy[J].Mining and Metallurgical Engineering,2003,23(4):84-86.
• [8]ZHANG Yong-hong,YIN Zhi-min,et al.Recrystallization of Al-Mg-Sc-Zr alloys[J].Rare Metal Materials and Engineering,2003,31(3):167-170.
• [9]Braun.Effect of thermal exposure on the corrosion properties of an Al-Mg-Sc alloys sheet[J].Materials Science Forum,2000,331:Ⅱ(4):9-14.
• [10]Hyde K B,Norman A F.The effect of cooling rate on the morphology of primary Al3Sc intermetallic particles in Al-Sc alloys[J].Acta Mater,2001,49:1327-1337.
• [11]赵卫涛,闫德胜,戎利建.变形Al-Mg-Sc-Zr合金退火组织的TEM观察[J].金属学报,2005,41(11):1150-1154.ZHAO Wei-tao,YAN De-sheng,RONG Li-jian.TEM observation of annealing microstructure of deformed Al-Mg-Sc-Zr alloy[J].Acta Metalluerica Sinica,2005,41(11):1150-1154.
• [12]Brown B F.Stress-corrosion cracking in high strength steels and in Titanium and Aluminum alloys[J].Naval Research Laboratory Washington DC,1972:184-190.
• [13]李劲风,曹发和,张昭.铝合金剥蚀敏感性及定量研究方法[J].中国腐蚀与防护学报,2004,24(1):55-58.LI Jin-feng,CAO Fa-he,ZHANG Zhao.Review on exfoliation susceptibility of aluminium alloys and quantitative measurement method[J].Journal of ChineseSociety For Corrosion and Protection,2004,24(1):55-58.

文章评论(Comment)：