景财年,刘在学,王作成,林晓娟,金成俊

• 1:山东建筑大学材料科学与工程学院
• 2:山东建筑大学材料科学与工程学院
• 3:山东大学材料科学与工程学院
• 4:山东建筑大学材料科学与工程学院

摘要(Abstract)：

含有磷、铜的CMnAl-TRIP钢板在820℃温度退火2min,然后分别在450℃和400℃贝氏体区等温不同的时间,研究了不同贝氏体等温温度对显微组织、力学性能和残余奥氏体稳定性的影响。结果表明CMnAl-TRIP钢具有优异的力学性能和延展性,450℃等温处理时钢板的各项力学性能优于400℃等温处理,而400℃等温处理试样中残余奥氏体的碳含量高,稳定性高,马氏体总体转变率低,导致低的应变硬化指数n值、均匀伸长率和总体伸长率。

关键词(KeyWords)： 铝;贝氏体等温温度(IBT);相变诱发塑性(TRIP);力学性能;残余奥氏体稳定性

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 景财年,刘在学,王作成,林晓娟,金成俊

参考文献(References)：

• [1]Zackay V F,Parker E R,Fahr D D,et al.The enhancement of ductility on high-strength steels[J].Trans of ASM,1967,60(2):252-259.
• [2]Fischer F D,Reisner G,Werner E,et al.A new view on transformation induced plasticity(TRIP)[J].International Journal of Plasticity,2000,16:723-748.
• [3]De Cooman B C.Structure-properties relationship in TRIP steels containing carbide-free bainite[J].Current Opinion in Solid State and Materials Science,2004,8:285-303.
• [4]Zhao L,Moreno J,Kruijver S,et al.Influence of intercritical annealing temperature on phase transformations in a high aluminium TRIP steel[A].De CoomanB C.Int Conf on TRIP-Aided High Strength Ferrous Alloys[C].Aachen:WMG,2001:141-145.
• [5]Girault E,Jacques P,Harlet P.Metallographic methods for revealing the multiphase microstructure of TRIP-assisted steels[J].Material Characterization,1998,40:111-118.
• [6]Sugitomo K,Kobayashi M,Shirsawa H.Effects of second phase morphology on retained austenite morphology and tensile properties in a TRIP-aided dual-phasesteel sheet[J].ISIJ Int,1993,33:775-782.
• [7]Krizan D,Antonissen J,Barbe L,et al.Properties of austenite in micro-alloyed C-Mn-Al-Si-P TRIP steels[A].Baker M A.45thMWSP[C].Chicago:David LKanagy,2003:437-448.
• [8]Itami A,Takahashi M,Usihioda K.Plastic stability of retained austenite in the cold-rolled 0.14%C-1.9%Si-1.7%Mn sheet steel[J].ISIJ Int,1995,35:1121-1127.
• [9]Sugimoto K,Usui N,Kobayashi M,et al.Effects of volume fraction and stability of retained austenite on ductility of TRIP-aided dual-phase steels[J].ISIJInt,1992,32:1311-1318.

文章评论(Comment)：