许晓静,汪成松,郭云飞,丁清,黄晶,朱金鑫,杨帆

• 1:江苏大学先进制造与现代技术研究所

摘要(Abstract)：

采用X射线衍射分析(XRD)、电子背散射衍射分析(EBSD)、电导率测试、硬度测试、拉伸试验、晶间腐蚀试验和剥落腐蚀试验,研究了固溶冷变形-预回复对超高强铝合金Al-13.01Zn-3.16Mg-2.8Cu-0.204Zr-0.0757Sr固溶组织、时效及性能的影响。结果表明,预回复对固溶冷变形态下超高强铝合金的性能改善作用不大。相比固溶—冷压缩—固溶—时效和固溶—冷压缩—预回复—固溶—时效工艺,合金在固溶—冷压缩—时效工艺下具有更优秀的平均晶粒尺寸,硬度、低角度晶界比例、抗拉强度、屈服强度和抗晶间腐蚀性能。其中固溶—冷压缩—时效工艺下合金的屈服、抗拉强度达到了683.2 MPa、734.7 MPa,伸长率为6.1%,且晶间腐蚀深度为23.81μm,晶间腐蚀等级为二级。相比另外两种工艺,该工艺下合金屈服强度的贡献主要是来自位错强化和低角度晶界强化。

关键词(KeyWords)： Al-Zn-Mg-Cu超高强铝合金;预回复;冷压缩;组织性能

Abstract:

Keywords:

基金项目(Foundation): 江苏大学研究生科研创新计划项目(KYXX_0031);; 国家自然科学基金资助(项目号51074079)

作者(Author): 许晓静,汪成松,郭云飞,丁清,黄晶,朱金鑫,杨帆

DOI: 10.13289/j.issn.1009-6264.2017.01.007

参考文献(References)：

• [1]刘兵,彭超群,王日初,等.大飞机用铝合金的研究现状及展望[J].中国有色金属学报,2010,20(9):1705-1715.LIU Bing,PENG Chao-qun,WANG Ri-chu,et al.Recent development and prospects for giant plane aluminum alloys[J].The Chinese Journal of Nonferrous Metals,2010,20(9):1705-1715.
• [2]孙爱民,程晓农.汽车面板用铝合金的研究现状[J].轻金属,2008(9):61-63.SUN Ai-min,CHENG Xiao-nong.Recent progress of research on aluminium alloys for automobile body sheets[J].Light Metals,2008(9):61-63.
• [3]丁向群,何国求,陈成澍,等.轿车用铝合金的研究应用进展[J].同济大学学报(自然科学版),2005,22(11):86-90.DING Xiang-qun,HE Guo-qiu,CHEN Cheng-shu,et al.Review of research and application development of aluminum alloy used in cars[J].Journal of Tongji University,2005,33(11):86-90.
• [4]姬浩.7000系高强铝合金的发展及其在飞机上的应用[J].航空科学技术,2015,26(6):75-78JI Hao.Development and application of 7000 high strength aluminum alloyson airplane[J].Aeronautical Science&Technology,2015,26(6):75-78.
• [5]陈小明,宋仁国,李杰.7xxx系铝合金的研究现状及发展趋势[J].材料导报,2009,23(2):67-70.CHEN Xiao-ming,SONG Reng-guo,LI Jie.Current research status and development trends of 7xxx series aluminum alloys[J].Materials Review,2009,23(2):67-70.
• [6]程晓农,宋刚,莫纪平,等.强化固溶态2024铝合金ECAP加工后的拉伸性能[J].江苏大学学报(自然科学版),2007,28(1):33-36.CHENG Xiao-nong,SONG Gang,MO Ji-ping,et al.Tensile properties of 2024 A l alloy processed by enhanced solid-solution and subsequent equalchannel angular pressing[J].Journal of Jiangsu University(Natural Science Edition),2007,28(1):33-36.
• [7]XU Xiao-jing,CAO Jin-qi,CHENG Xiao-nong,et al.Tensile properties of 2024 Al alloy processed by enhanced solid-solution and equal-channel angular pressing[J].Transactions of Nonferrous Metals Society of China,2006,16(S3):1541-1544.
• [8]程仁菊,潘复生,王维青.Al-Sr中间合金制备及应用的发展现状[J].轻合金加工技术,2006,34(7):5-11.CENG Ren-ju,PAN Fu-sheng,WANG Wei-qing.Development ststus of preparation and application of AL-Sr master alloy[J].Light Alloy Fabrication Technology,2006,34(7):5-11.
• [9]宋仁国.高强度铝合金的研究现状及发展趋势[J].材料导报,2000,14(1):20-21+34.SONG Ren-guo.Current status and trends in high strength aluminum alloy research[J].Material Review,2000,14(1):20-21+34.
• [10]王涛,尹志民.高强变形铝合金的研究现状和发展趋势[J].稀有金属,2006,30(2):197-202.WANG Tao,YIN Zhi-min.Research status and development trend of ultra-high strength aluminum alloys[J].Chinese Journal of Rare Metals,2006,30(2):197-202.
• [11]蹇海根,姜锋,徐忠艳,等.航空用高强韧Al-Zn-Mg-Cu系铝合金的研究进展[J].热加工工艺,2006,35(12):61-66.JIAN Hai-gen,JIANG Feng,XU Zhong-yan,et al.Study progress of high strength and tenacity Al-Zn-Mg-Cu aluminum alloy for aviation[J].Hot Working Technology,2006,35(12):61-66.
• [12]GB/T 7998-2005.铝合金晶间腐蚀测定方法[S].2005.
• [13]ASTM G110-1992(1997).用浸入氯化钠+过氧化氢溶液的方法评定可热处理铝合金的晶间腐蚀性能的规程[S].1992.
• [14]GB/T 22639-2008.铝合金加工产品的剥落腐蚀试验方法[S].2008.
• [15]ASTM G34-2001.2XXX和7XXX系列铝合金剥落腐蚀敏感性的试验方法[S].2001.
• [16]Youssef K M,Scattergood R L,Murty K L,et al.Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility[J].Scripta Materialia,2006,54(2):251-256.
• [17]XU Xiao-jing,SHAO Hong-hong,GAO Jian-chang,et al.Effect of Si C film on tensile properties of nanostructured Ti produced by compressive deformation at liquid-nitrogen temperature[J].Materials Science and Engineering:a,2008,493(1):195-201.
• [18]ZHAO Y-h,LIAO X-z,JIN Z,et al.Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing[J].ACTA Materialia,2004,21(15):4589-4599.
• [19]张允康.7085铝合金组织性能调控及机理初步研究[D].镇江:江苏大学,2013.ZHANG Yun-kang.Reserch on structure properties control and mechanisms of 7085 aluminum alloy[D].Zhengjing:Jiangsu University,2013.
• [20]Marcello C.Microstructure strengthening mechanisms in different equal channel angular pressed aluminum alloys[J].Materials Science and Engineering:A,2013,560:413-432.
• [21]Luo P,Mc Donald D T,Xu W,et al.A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing[J].Scripta Materialia,2012,66(10):785-788.
• [22]张显峰.7×××铝合金热处理工艺及组织性能研究[D].长沙:湖南大学,2012.

文章评论(Comment)：