李洋,李师居,包俞颉,许光明,李勇

• 1:东北大学材料电磁过程研究教育部重点实验室
• 2:东北大学轧制技术及连轧自动化国家重点实验室

摘要(Abstract)：

采用光学显微镜、扫描电镜、电子探针微区分析、差式扫描量热仪等研究了不同均匀化处理对不同工艺制备的2099铝锂合金组织的影响;并结合均匀化动力学确定了不同工艺制备的2099铝锂合金适宜的均匀化处理工艺。结果表明:传统铸造工艺制备的2099铝锂合金适宜的均匀化工艺为510℃×24 h,双辊铸轧工艺生产的电磁铸轧合金适宜的均匀化制度为510℃×12 h。双辊铸轧工艺可以通过改善微观组织大幅缩短均匀化处理所需要的时间。

关键词(KeyWords)： 2099铝锂合金;双辊铸轧;均匀化处理;微观偏析

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51790485)

作者(Author): 李洋,李师居,包俞颉,许光明,李勇

DOI: 10.13289/j.issn.1009-6264.2020-0468

参考文献(References)：

• [1] El-Aty A A,Xu Y,Zhang S H,et al.Experimental investigation of tensile properties and anisotropy of 1420,8090 and 2060 Al-Li alloys sheet undergoing different strain rates and fibre orientation:A comparative study[J].Procedia Engineering,2017,207:13-18.
• [2] 魏修宇，郑子樵，李世晨，等.2197铝锂合金的耐热性能[J].中国有色金属学报，2007(9):1417-1422.WEI Xiu-yu,ZHENG Zi-qiao,LI Shi-chen,et al.Heat resistant properties of 2197 Al-Li alloy[J].The Chinese Journal of Nonferrous Metals,2007(9):1417-1422.
• [3] Jiang N,Gao X,Zheng Z Q,et al.Microstructure evolution of aluminum-lithium alloy 2195 undergoing commercial production [J].Transactions of Nonferrous Metals Society of China,2010,20(5):740-745.
• [4] El-Aty A A,Xu Y,Guo X,et al.Strengthening mechanisms,deformation behavior,and anisotropic mechanical properties of Al-Li alloys:A review[J].Journal of Advanced Research,2018,10(C):49-67.
• [5] Rioja R J,Liu J.The evolution of Al-Li base products for aerospace and space applications[J].Metallurgical and Materials Transactions A,2012,43(9):3325-3337.
• [6] De P S,Mishra R S,Baumann J A.Characterization of high cycle fatigue behavior of a new generation aluminum lithium alloy[J].Acta Materialia,2011,59(15):5946-5960.
• [7] Kim M S,Kim S H,Kim H W.Deformation-induced center segregation in twin-roll cast high-Mg Al-Mg strips[J].Scripta Materialia,2018,152:69-73.
• [8] 孙斌煜.板带铸轧理论与技术[M].北京：冶金工业出版社，2002:25
• [9] Hadadzadeh A,Wells M A.Inverse and centreline segregation formation in twin roll cast AZ31 magnesium alloy[J].Materials ence and Technology,2015,31(14):1715-1726.
• [10] 林毅，郑子樵，张海锋，等.2099铝锂合金均匀化处理工艺[J].中南大学学报(自然科学版),2013,44(11):4429-4435.LIN Yi,ZHENG Zi-qiao,ZHANG Hai-feng,et al.Homogenization process of 2099 Al-Li alloy[J].Journal of Central South University(Science and Technology),2013,44 (11):4429-4435.
• [11] 郑子樵，李劲风，陈志国，等.铝锂合金的合金化与微观组织演化[J].中国有色金属学报，2011,21(10):2337-2351.ZHENG Zi-qiao,LI Jin-feng,CHEN Zhi-guo,et al.Alloying and microstructural evolution of Al-Li alloys[J].The Chinese Journal of Nonferrous Metals,2011,21:2337-2351.
• [12] Wang D,Zhou C,Xu G J,et al.Heat transfer behavior of top sidepouring twin-roll casting[J].Journal of Materials Processing Technology,2014,214(6):1275-1284.
• [13] Wang X D,Wang Z F,Liu Y,et al.A particle swarm approach for optimization of secondary cooling process in slab continuous casting[J].International Journal of Heat and Mass Transfer,2016,93:250-256.
• [14] 赵啸林，毛大恒，严宏志，等.铝电磁铸轧冷却区中电磁场行为探讨[J].轻合金加工技术，1998(10):3-5.ZHAO Xiao-lin,MAO Da-heng,YAN Hong-zhi,et al.The research of behavior law about electromagnetic field in the cooling zone of electromagnetic casting rolling[J].Light Alloy Fabrication Technology,1998 (10):3-5.
• [15] 崔忠圻，刘北兴.金属学与热处理原理[M].哈尔滨：哈尔滨工业大学出版社，2004.
• [16] 潘青林，尹志民，金头男，等.快速凝固铝锂合金的显微组织与力学性能[J].中南大学学报(自然科学版),1991(3):288-293.PAN Qing-lin,YIN Zhi-min,JIN Tou-nan,et al.Microstructure and mechanical properties of rapidly solidified Al-Li based alloy[J].Journal of Central South University(Science and Technology):1991(3):288-293.
• [17] Bois-Brochu A,Goma F A T,Blais C,et al.Al-Li alloy 2099-T83 extrusions:Static mechanical properties,microstructure and texture[J].Advanced Materials Research,2012,409:29-34.
• [18] Shewmon P G.Diffusion in solids[J].International Journal of Heat and Mass Transfer,1964,7(2):280.
• [19] 刘国勋，宋维锡，宋泝生，等.金属学原理[J].金属学报，1964(3):333-334.LIU Guo-xun,SONG Wei-xi,SONG Hui-sheng,et al.Principles of metalology[J].Acta Metallurgica Sinica,1964 (3):333-334.

文章评论(Comment)：