杜秀丽,张俊婷,王宥宏

• 1:太原科技大学应用科学学院
• 2:太原科技大学材料科学与工程学院

摘要(Abstract)：

研究了时效温度和时间对Cu-5Fe-2Sn合金强度与导电性能的影响。根据导电率与析出相转变量之间关系,计算了Cu-5Fe-2Sn合金时效过程中析出相的转变率;借助Martition定律和Avrami经验方程,得到了Cu-5Fe-2Sn合金在不同时效温度下的动力学方程和导电率方程。与实验结果比较发现,导电率方程可准确表达Cu-5Fe-2Sn合金时效过程中导电率的变化。

关键词(KeyWords)： Cu-5Fe-2Sn合金;时效处理;导电率;析出动力学

Abstract:

Keywords:

基金项目(Foundation): 国家自然基金应急管理项目(51641406);; 太原科技大学博士启动基金(20152009)

作者(Author): 杜秀丽,张俊婷,王宥宏

DOI: 10.13289/j.issn.1009-6264.2018-0476

参考文献(References)：

• [1] 马涛,李运刚.Cu-Fe合金的研究现状[J].铸造技术,2016,37(7):1311-1314.MA Tao,LI Yun-gang.Research progress on Cu-Fe alloys[J].Foundry Technology,2016,37(7):1311-1314.
• [2] 张俊婷.Cu-Fe合金亚稳液相分离行为与性能的研究[D].太原:太原科技大学,2014.ZHANG Jun-ting.Study on metastable liquid separation behavior and properties for Cu-Fe alloys[D].Taiyuan:Taiyuan University of Science and Technology,2014.
• [3] 杨雨潭,李秋书,张俊婷,等.高强高导Cu-Sn-Fe合金的微观组织与性能[J].太原科技大学学报,2014,35(1):60-64.YANG Yu-tan,LI Qiu-shu,ZHANG Jun-ting,et al.Microstructures and properties of Cu-Sn-Fe alloys with high strength and high conductivity[J].Journal of Taiyuan University of Science and Technology,2014,35(1):60-64.
• [4] 袁竭,隆永胜,赵顺洪,等.高强高导Cu合金强化技术研究进展[J].特种铸造及有色合金,2015,35(8):828-832.YUAN Jie,LONG Yong-sheng,ZHAO Shun-hong,et al.Progress in strengthening high strength and high conductive copper alloys[J].Special Casting and Nonferrous Alloys,2015,35(8):828-832.
• [5] Liu K M,Lu D P,Zhou H T,et al.Effect of Ag microalloying on the microstructure and properties of Cu-14Fe in situ composite[J].Materials Science and Engineering A,2010,527(18/19):4953-4958.
• [6] 陈毅,张进东,孟亮.时效工艺对Cu-12%Fe合金组织性能的影响[J].材料热处理学报,2009,30(6):75-78.CHEN Yi,ZHANG Jin-dong,MENG Liang.Effect of aging process on microstructure and properties of Cu-12%Fe alloy[J].Transactions of Materials and Heat Treatment,2009,30(6):75-78.
• [7] 李勇,易丹青,柳瑞清.时效处理对形变Cu-10Fe-3Ag组织及性能的影响[J].塑性工程学报,2010,17(4):135-139.LI Yong,YI Dan-qing,LIU Rui-qing.Effect of aging treatment on microstructure and mechanical properties of Cu-10Fe-3Ag in-situ composite[J].Journal of Plasticity Engineering,2010,17(4):135-139.
• [8] 李明生,姚再起,刘书华,等.时效处理对Cu-13Fe合金力学性能和导电性的影响[J].热加工工艺,2004,(2):27-28.LI Ming-sheng,YAO Zai-qi,LIU Shu-hua,et al.Effect of ageing on mechanical properties and conductivity of Cu-13Fe alloy[J].Hot Working Technology,2004,(2):27-28.
• [9] 丁雨田,孟斌,高钰璧,等.时效处理对 GH3625 合金管材组织及性能的影响[J].材料热处理学报,2018,39(4):70-77.DING Yu-tian,MENG Bin,GAO Yu-bi,et al.Effect of aging treatment on microstructure and properties of GH3625 alloy tube[J].Transactions of Materials and Heat Treatment,2018,39(4):70-77.
• [10] 王敬忠,刘阿娇,李科元,等.固溶和时效处理对热轧态825合金微观组织的影响[J].材料热处理学报,2018,39(1):58-65.WANG Jing-zhong,LIU A-jiao,LI Ke-yuan.et al.Effect of solution and aging treatment on microstructure of hot rolled 825 alloy[J].Transactions of Materials and Heat Treatment,2018,39(1):58-65.
• [11] 赵晓燕,宋航,王旭.时效工艺对轧制态 7075 铝合金耐蚀性能的影响[J].材料热处理学报,2018,39(3):21-29.ZHAO Xiao-yan,SONG Hang,WANG Xu.Effect of aging process on corrosion behavior of rolled 7075 aluminum alloy[J].Transactions of Materials and Heat Treatment,2018,39(3):21-29.
• [12] Huang F X,Ma J S,Ning H L,et al.Precipitation in Cu-Ni-Si-Zn alloy for lead frame[J].Materials Letters,2003,57:2135-2139.
• [13] Dumanska M T,Zieba P,Pawloski A,et al.Practical aspects of discontinuous precipitation and dissolution[J].Materials Chemistry and Physics,2003,80:476-481.
• [14] Gao L Q,Yang X,Zhang X F,et al.Aging behavior and phase transformation of the Cu-0.2 wt%Zr-0.15 wt%Y alloy[J].Vacuum,2019,159:367-373.
• [15] Lockyer S A,Noble F W.Precipitate structure in a Cu-Ni-Si alloy[J].Journal of Materials Science,1994,29:218-226.
• [16] Lei Q,Li Z,PAN Z Y,et al.Dynamics of phase transformation of Cu-Ni-Si alloy with super-high strength and high conductivity during aging[J].Transaction of Nonferrous Metals Society of China,2010,20:1006-1011.
• [17] Cahn R W,Haasen P.Physical Metallurgy[M].4th Ed.North-Holland:Elsevier Publishing,1996.
• [18] Kramer E J,Edwin L,Robert W.Comprehensive Treatment[M].Materials Science and Technology,1993.

文章评论(Comment)：