固溶温度对AZ80镁合金析出相β-Mg17Al12及性能的影响Effects of solution temperature on precipitation of β-Mg17Al12 phase and mechanical properties of AZ80 magnesium alloy
张菊梅,蒋百灵,王志虎,袁森,夏鹏举
摘要(Abstract):
采用光学显微镜(OM)、X射线衍射(XRD)、扫描电镜(SEM)及拉伸试验等研究了铸态AZ80镁合金经不同固溶温度保温处理后析出相β-Mg17Al12及性能变化。研究表明,随固溶温度的升高,AZ80镁合金晶界及枝晶间的粗大网状β-Mg17Al12相由于溶解而逐步减少,有呈不连续、细小颗粒状均匀分布在α-Mg基体内的一次析出相β-Mg17Al12出现;由于析出相β-Mg17Al12的数量减少、细小颗粒化,降低了析出相强化的作用,使材料的整体硬度HB明显下降,抗拉强度和伸长率显著提高,屈服强度只有少量下降。
关键词(KeyWords): 固溶温度;镁合金;β-Mg17Al12相;力学性能
基金项目(Foundation):
作者(Author): 张菊梅,蒋百灵,王志虎,袁森,夏鹏举
参考文献(References):
- [1]William K.Toward the light[J].Automotive Engineers,2001,(3):46-48.
- [2]Mordike B L,Ebert T.Magnesium properties-applications-potential[J].Mater Sci Eng A,2001,302:37-45.
- [3]Baghni I M,WU Yin-shun,LI Jiu-qing,et al.Mechanical properties and potential applications of magnesium alloys[J].Trans Nonferrous Met Soc China,2003,13(6):1253-1259.
- [4]SONG Guang-ling,Amanda L Bowles,David H St John.Corrosion resistance of aged die cast magnesium alloy AZ91D[J].Materials Science and EngineeringA,2004,366:74-86.
- [5]Dahle,St John D H,Dunlop G L.Developments and challenges in the utilization of magnesium alloys[J].Mater Forum,2000,24:167-182.
- [6]Aghion,Bronfin B,Eliezer D.The role of the magnesium industry in protecting the environment[J].Journal of Materials Processing Technolegy,2001,117:381-383.
- [7]陈振华.变形镁合金[M].北京:化学工业出版社,2005.
- [8]黄光胜.镁合金成形性能的改善及热变形行为研究[D].重庆:重庆大学材料科学与工程学院,2003:19-40.
- [9]Cizek L,Greger M,Pawlica L.Study of selected properties of magnesium alloy AZ91 after heat treatment and forming[J].Journal of Materials ProcessingTechnology,2004,157-158:466-471.
- [10]黄巍,李荻.300℃等温处理时间对AZ91D压铸镁合金组织和性能的影响[J].材料热处理学报,2006,27(2):37-41.HUANG Wei,LI Di.Effects of isothermal heat-treatment at 300℃on microstructure and mechanical properties of AZ91D die cast magnesium alloy[J].TransMater Heat Treat,2006,27(2):37-41.
- [11]郭强,严红革,陈振华,等.均匀化退火工艺对铸态AZ80镁合金组织与性能的影响[J].金属热处理,2006,31(7):77-80.GUO Qiang,YAN Hong-ge,CHEN Zhen-hua,et al.Influence of homogenizing annealing process on microstructure and mechanical properties of as-castAZ80 magnesium alloy[J].Heat Treatment of Metals,2006,31(7):77-80.
- [12]金军兵,王智祥,刘雪峰,等.均匀化处理对AZ91镁合金组织和力学性能的影响[J].金属学报,2006,42(10):1014-1018.JIN Jun-bing,WANG Zhi-xiang,LIU Xue-feng,et al.Effect of homogenizing treatment on microstructures and mechanical properties of AZ91 magnesiumalloy[J].ACTA Metallurgica Sinica,2006,42(10):1014-1018.
- [13]Duly D,Simon J P,Brechet Y.On the competition between continuous and discontinuous precipitations in binary Mg-Al alloys[J].Acta Metall Mater,1995,43:101-106.
- [14]崔忠圻.金属学与热处理[M].哈尔滨:哈尔滨工业大学出版社,1989.
- [15]Kleiner S,Beffort O,Uggowitzer P J.Microstructure evolution during reheating of an extruded Mg-Al-Zn alloy into the semisolid state[J].Scripta Materialia,2004,51:405-410.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||