贺英,金红明,褚于良,陈纪昌,张志磊,黄宏川,王均安

• 1:上海大学材料科学与工程学院
• 2:上海大学-兴化特种不锈钢产业研究院

摘要(Abstract)：

利用EBSD织构分析技术研究了409L、410S和430铁素体不锈钢的再结晶织构并对表面起皱进行相关性研究。结果表明,3种铁素体不锈钢经过15%拉伸变形后表面都会出现起皱现象,起皱程度与织构有关;冷轧退火板材中{111}组分比例越高,表面起皱越轻,而{100}织构组分的比例越高,表面起皱越严重;铁素体不锈钢中强{111}织构和各种取向晶粒的均匀分布是提高抗表面起皱的关键因素。

关键词(KeyWords)： 铁素体不锈钢;拉伸变形;再结晶织构;γ-纤维织构;表面起皱

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51171103)

作者(Author): 贺英,金红明,褚于良,陈纪昌,张志磊,黄宏川,王均安

DOI: 10.13289/j.issn.1009-6264.2017.02.014

参考文献(References)：

• [1]Ota H,Kato Y,Ujiro T,et al.Ferritic Cr-containing steel sheet having excellent ductility,formability,and anti-ridging properties:US Patent 6,500,280[P].2002.
• [2]Vlad C M,Dahms M,Bunge H J,et al.Optimization of texture of X8Cr17 steel sheet by means of ODF analysis[C]//Proceedings of 8thInternational Conference on Texture of Materials(ICOTOM 8),Eds.Kallend J.S.and Gottstein G,The Metallurgical Society,AIME,Warrendale,1988,873-879.
• [3]Park S H,Kim K Y,Lee Y D,et al.Evolution of microstructure and texture associated with ridging in ferritic stainless steels[J].ISIJ International,2002,42(1):100-105.
• [4]Shin H J,An J K,Park S H,et al.The effect of texture on ridging of ferritic stainless steel[J].Acta Materialia,2003,51(16):4693-4706.
• [5]da Costa Viana C S,Pinto A L,Candido F S,et al.Analysis of ridging in three ferritic stainless steel sheets[J].Materials Science and Technology,2006,22(3):293-300.
• [6]苏頔璇,陈雨来,李静媛,等.再结晶退火对超纯铁素体不锈钢抗皱性的影响[J].材料热处理学报,2015,36(9):124-130.SU Di-xuan,CHEN Yu-lai,LI Jing-yuan,et al.Effect of recrystallization on ridging resistance of an ultra-purified ferritic stainless steel[J].Transactions of Materials and Heat Treatment,2015,36(9):124-130.
• [7]Jung I,Mola J,Chae D,et al.Influence of the cold rolling and annealing sequence on the ridging behaviour of Ti-stabilized 18%Cr ferritic stainless steel[J].Steel Research International,2010,81(12):1089-1096.
• [8]Mola J,Jung I,Park J,et al.Ridging control in transformable ferritic stainless steels[J].Metallurgical and Materials Transactions A,2012,43(1):228-244.
• [9]Annan K A,Siyasiya C W,Stumpf W E,et al.Effect of hot rolling conditions on ridging in 16wt%Cr ferritic stainless steel sheet[J].Journal of the Southern African Institute of Mining and Metallurgy,2013,113(2):91-96.
• [10]邬珠仙,李茂君,张朝波,等.罩式退火对430铁素体不锈钢成型性及抗起皱性的影响[J].金属热处理,2013,38(5):96-99.WU Zhu-xian,LI Mao-jun,ZHANG Chao-bo,et al.Effect of bell furnace annealing on formability and ridging resistance of ferritic stainless steel[J].Heat Treatment of Metals,2013,38(5):96-99.
• [11]Takechi H,Kato H,Sunami T,et al.On the mechanism of ridging phenomenon in 17%-chromium stainless steel sheets[J].Journal of Japan Institute Metal,1967,31(6):717-723.
• [12]Wright R N.Anisotropic plastic flow in ferritic stainless steels and the“roping”phenomenon[J].Metallurgical Transactions,1972,3(1):83-91.
• [13]Chao H C.Recent studies into the mechanism of ridging in ferritic stainless steels[J].Metallurgical Transactions,1973,4(4):1183-1186.
• [14]Wu P D,Lloyd D J.Analysis of ridging in ferritic stainless steel sheet[J].Materials Science and Engineering A,2006,423(1/2):300-305.
• [15]Kim H M,Szpunar J A.Ridging phenomena in textured ferritic stainless steel sheets[J].Materials Science Forum,1994,157/162:753-760.
• [16]Siegmund T,Werner E,Fischer F D.The irreversible deformation of a duplex steel under thermal cycling[J].Material Science and Engineering A,1993,169(1/2):125-134.
• [17]Iza-Mendia A,Piol-Juez A,Urcola J J,et al.Microstructural and mechanical behavior of a duplex stainless steel under hot working conditions[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29(12):2975-2986.
• [18]Maki T,Furuhara T,Tsuzaki K.Microstructure development by thermo-mechanical processing in duplex stainless steel[J].ISIJ International,2001,41(6):571-579.
• [19]da Costa Viana C S,Candido F S,Pinto A L.An EBSD analysis of the origins of ridging in AISI 430 steel sheets[J].Materials Science Forum,2005,495/497:173-178.
• [20]Yazawa Y,Ozaki Y,Kato Y,et al.Development of ferritic stainless steel sheets with excellent deep drawablity by{111}recrystallization texture control[J].JSAE Review,2003,24(4):483-488.

文章评论(Comment)：