贾海龙,刘彦麟,査敏,靳慎豹,王慧远

• 1:吉林大学材料科学与工程学院
• 2:河北工业大学材料科学与工程学院

摘要(Abstract)：

7xxx(Al-Zn-Mg-Cu)系铝合金作为可热处理强化的高强铝合金，在航空航天、轨道交通领域等已得到广泛应用。近年来，针对7xxx系铝合金的研究主要集中在成分优化设计、微观组织调控以及加工工艺改进等。本文综述了近年来7xxx系铝合金在挤压、轧制和大塑性变形技术方面的研究进展。详细介绍了合金成分、不同塑性加工方式(挤压、轧制、等通道转角挤压、高压扭转、累积叠轧)以及热处理工艺对7xxx系铝合金微观组织和力学性能的影响，旨在为深入探究高性能7xxx系铝合金强韧化机制及其可控制备提供参考，推动它们在工业领域的应用与发展。

关键词(KeyWords)： 7xxx系铝合金;挤压;轧制;大塑性变形;热处理

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金委政府间重点专项(2024YFE0108900)

作者(Author): 贾海龙,刘彦麟,査敏,靳慎豹,王慧远

DOI: 10.13289/j.issn.1009-6264.2024-zt02

参考文献(References)：

• [1] 刘兵，彭超群，王日初，等.大飞机用铝合金的研究现状及展望[J].中国有色金属学报，2010,20(9):1705-1715.LIU Bing,PENG Chao-qun,WANG Ri-chu,et al.Recent development and prospects for giant plane aluminum alloys[J].The Chinese Journal of Nonferrous Metals,2010,20(9):1705-1715.
• [2] 罗磊.石油钻探用高强耐热耐蚀Al-7.0Zn-2.4Mg-1.7Cu合金变截面挤压管组织与性能[D].长沙：中南大学，2022.LUO Lei.Microstructures and properties of high-strength,heat and corrosion-resistant Al-7.0Zn-2.4Mg-1.7Cu alloy extruded pipe with variable cross-section for oil drilling[D].Changsha:Central South University,2022.
• [3] 郑晓静.7系高强铝合金变形强化工艺与组织性能关系[J].科技视界，2021(4):56-58.ZHENG Xiao-jing.Relationship between deformation strengthening process and microstructure and properties of 7 series high strength aluminum alloy[J].Science & Technology Vision,2021(4):56-58.
• [4] Kovarik L,Gouma P I,Kisielowski C,et al.A HRTEM study of metastable phase formation in Al-Mg-Cu alloys during artificial aging[J].Acta Materialia,2004,52(9):2509-2520.
• [5] Yang Z,Tang J,Mo X,et al.Microstructure,mechanical properties,and strengthening mechanisms of ultra-high strength Al-Zn-Mg-Cu alloy prepared by continuous extrusion forming process[J].Materials & Design,2024,242:112985.
• [6] Meng X,Zhang D,Zhang W,et al.Microstructure and mechanical properties of a rapidly-solidified and extruded Al-13.2Zn-2.5Mg-1.2Cu-0.2Zr alloy and its aging hardening response at 120 ℃[J].Materials Science and Engineering A,2021,826:141969.
• [7] Wen C,Tang J,Chen W,et al.Deformation mechanisms and mechanical properties of the high-strength and ductile Al-Zn-Mg-Cu alloys processed by repetitive continuous extrusion forming process with different heat treatments[J].Journal of Alloys and Compounds,2023,965:171006.
• [8] Li G,Pan X,Jiang J,et al.Achieving ultra-fine grains and high corrosion resistance of Al-Zn-Mg-Cu alloy by ECAP and post cold rolling[J].Journal of Materials Research and Technology,2023,26:7354-7368.
• [9] Kazemi-Navaee A,Jamaati R,Aval H J.Effect of single roll drive cross rolling on the microstructure,crystallographic texture,and mechanical behavior of Al-Zn-Mg-Cu alloy[J].Archives of Civil and Mechanical Engineering,2022,22(1):41.
• [10] Ghosh A,Das K,Eivani A R,et al.Development of mechanical properties and microstructure for Al-Zn-Mg-Cu alloys through ECAP after optimizing the outer corner angles through FE modeling[J].Archives of Civil and Mechanical Engineering,2023,23(2):78.
• [11] Chung T F,Yang Y L,Huang B M,et al.Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy[J].Acta Materialia,2018,149:377-387.
• [12] 李慎兰，黄昌龙，黄志其，等.固溶处理工艺对7003铝合金组织和性能的影响[J].材料热处理学报，2015,36(2):42-48.LI Shen-lan,HUANG Chang-long,HUANG Zhi-qi,ed al.Effect of solution treatment on microstructure and properties of 7003 aluminum alloy[J].Transactions of Materials and Heat Treatment,2015,36(2):42-48.
• [13] 卢苹苹，史庆南，唐广波，等.挤压速度对双通道等径角挤压7003铝合金力学性能的影响[J].金属热处理，2014,39(5):74-76.LU Ping-ping,SHI Qing-nan,TANG Guang-bo,et al.Effects of extrusion speed on mechanical properties of 7003 aluminum alloy by D-ECAP[J].Heat Treatment of Metals,2014,39(5):74-76.
• [14] Xiang K,Lei X,Ding L,et al.Optimizing mechanical property of spray formed Al-Zn-Mg-Cu alloy by combination of homogenization and warm-rolling[J].Materials Science and Engineering A,2022,846:143248.
• [15] 刘民章.7050铝合金薄壁管挤压工艺[J].铝加工，2023(1):34-38.LIU Min-zhang.Extrusion technology of 7050 aluminium alloy thin-walled tube[J].Aluminium Fabrication,2023(1):34-38.
• [16] Liu T,Jiang H,Sun H,et al.Effects of rolling deformation on precipitation behavior and mechanical properties of Al-Zn-Mg-Cu alloy[J].Materials Science and Engineering A,2022,847:143342.
• [17] 陈康华，刘红卫，刘允中.升温固溶对Al-Zn-Mg-Cu合金组织与力学性能的影响[J].中南工业大学学报(自然科学版),2000(4):339-341.CHEN Kang-hua,LIU Hong-wei,LIU Yun-zhong.Effect of temperature-incremental solution heat treatment on the microstructure and mechanical properties of Al-Zn-Mg-Cu alloy[J].Journal of Central South University (Science and Technology),2000(4):339-341.
• [18] Shaeri M H,Shaeri M,Ebrahimi M,et al.Effect of ECAP temperature on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy[J].Journal of Technology & Science,2016,26:182-191.
• [19] Panigrahi S K,Jayaganthan R.Development of ultrafine grained high strength age hardenable al 7075 alloy by cryorolling[J].Materials & Design,2011,32(6):3150-3160.
• [20] 薛杰，王有为，张志豪，等.挤压温度对Al-Zn-Mg-Cu合金动态再结晶、时效组织和力学性能的影响[J].中国有色金属学报，2017,27(11):2204-2211.XUE Jie,WANG You-wei,ZHANG Zhi-hao,et al.Effects of extrusion temperature on dynamic recrystallization,aging microstructure and mechanical properties of Al-Zn-Mg-Cu alloy[J].The Chinese Journal of Nonferrous Metals,2017,27(11):2204-2211.
• [21] Chen Q,Xia X,Yuan B,et al.Microstructure evolution and mechanical properties of 7A09 high strength aluminium alloy processed by backward extrusion at room temperature[J].Materials Science and Engineering A,2013,588:395-402.
• [22] Shen G,Li M,Liu J,et al.Approaching 1 GPa ultra-high tensile strength in a nanostructured Al-Zn-Mg-Cu-Zr-Sc alloy prepared by severe plastic deformation[J].Advanced Engineering Materials,2024,26(12):2400093.
• [23] Shen G,Xiang Z,Ma X,et al.Microstructures and mechanical properties of a nanostructured Al-Zn-Mg-Cu-Zr-Sc alloy under natural aging[J].Materials,2023,16(12):4346.
• [24] Pan Y,Duan S,Guo F,et al.Stress corrosion inhibition mechanism of hot rolled medium thickness Al-Zn-Mg-Cu plate by cryogenic-aging treatment[J].Journal of Materials Research and Technology,2023,23:894-910.
• [25] Zhao J,Liu Z,Bai S,et al.Effects of natural aging on the formation and strengthening effect of G.P.zones in a retrogression and re-aged Al-Zn-Mg-Cu alloy[J].Journal of Alloys and Compounds,2020,829:154469.
• [26] Fang H C,Chao H,Chen K H.Effect of Zr,Er and Cr additions on microstructures and properties of Al-Zn-Mg-Cu alloys[J].Materials Science and Engineering A,2014,610:10-16.
• [27] 黎彦希，陈康华，陈送义，等.添加Cr和Yb对Al-Zn-Mg-xCu-Zr超强铝合金组织与性能的影响[J].中南大学学报(自然科学版),2015,46(12):4422-4433.LI Yan-xi,CHEN Kang-hua,CHEN Song-yi,et al.Effect of Cr and Yb additions on microstructure and properties of Al-Zn-Mg-xCu-Zr alloy[J].Journal of Central South University (Science and Technology),2015,46(12):4422-4433.
• [28] 冯春，张芳芳，朱丽娟，等.时效对石油钻杆用Al-7.51Zn-2.37Mg-1.72Cu合金力学及耐热性能的影响[J].稀有金属材料与工程，2022,51(3):990-996.FENG Chun,ZHANG Fang-fang,ZHU Li-juan,et al.Effect of aging on mechanical properties and thermal stability of Al-7.51Zn-2.37Mg-1.72Cu aluminum alloy used for drill pipe[J].Rare Metal Materials and Engineering,2022,51(3):990-996.
• [29] 黄婷，刘会群，林高用，等.超高强铝合金Al-7.88Zn-2.05Mg-1.70Cu-0.19Er薄带的组织与性能[J].稀有金属材料与工程，2022,51(9):3189-3196.HUANG Ting,LIU Hui-qun,LIN Gao-yong,et al.Microstructure and mechanical properties of ultra-high strength Al-7.88Zn-2.05Mg-1.70Cu-0.19Er aluminum alloy thin strip[J].Rare Metal Materials and Engineering,2022,51(9):3189-3196.
• [30] Khan M A,Xu C,Hamza M,et al.Enhanced tensile strength in an Al-Zn-Mg-Cu alloy via engineering the precipitates along the grain boundaries[J].Journal of Materials Research and Technology,2023,22:696-705.
• [31] Yang Y,Li Y,Yi D,et al.Revealing the microstructure evolution mechanism and mechanical responses of a novel Al-Zn-Mg-Cu alloy by hot deformation process[J].Journal of Materials Research and Technology,2024,29:3699-3710.
• [32] Li Y,Wang Y,Lu B,et al.Effect of Cu content and Zn/Mg ratio on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys[J].Journal of Materials Research and Technology,2022,19:3451-3460.
• [33] Wang F,Xiong B,Zhang Y,et al.Microstructure and mechanical properties of spray-deposited Al-Zn-Mg-Cu alloy processed through hot rolling and heat treatment[J].Materials Science and Engineering A,2009,518(1/2):144-149.
• [34] 李东锋，张新明，刘胜胆，等.锌镁含量对Al-Zn-Mg-Cu高强铝合金组织和性能的影响[J].材料热处理学报，2016,37(3):101-106.LI Dong-feng,ZHANG Xin-ming,LIU Sheng-dan,et al.Effect of Zn and Mg content on microstructure and properties of Al-Zn-Mg-Cu high strength aluminum alloys[J].Transactions of Materials and Heat Treatment,2016,37(3):101-106.
• [35] Liu L,Jia Y Y,Jiang J T,et al.The effect of Cu and Sc on the localized corrosion resistance of Al-Zn-Mg-X alloys[J].Journal of Alloys and Compounds,2019,799:1-14.
• [36] Fang X,Song M,Li K,et al.Effects of cu and al on the crystal structure and composition of η (MgZn2) phase in over-aged Al-Zn-Mg-Cu alloys[J].Journal of Materials Science,2012,47(14):5419-5427.
• [37] Yu X X,Sun J,Li Z T,et al.Solidification behavior and elimination of undissolved Al2CuMg phase during homogenization in Ce-modified Al-Zn-Mg-Cu alloy[J].Rare Metals,2020,39(11):1279-1287.
• [38] Wang X D,Nie Z R,Lin S P,et al.Effect of trace element erbium on corrosion resistance properties of Al-Zn-Mg-Cu alloy[J].Materials Science Forum,2009,610-613:663-667.
• [39] Ying T,Gu L,Tang X,et al.Effect of Sc microalloying on microstructure evolution and mechanical properties of extruded Al-Zn-Mg-Cu alloys[J].Materials Science and Engineering A,2022,831:142197.
• [40] Ye J,Pan Q,Liu B,et al.Effects of co-addition of minor Sc and Zr on aging precipitates and mechanical properties of Al-Zn-Mg-Cu alloys[J].Journal of Materials Research and Technology,2023,22:2944-2954.
• [41] Wang Y,Wu X,Cao L,et al.Effect of trace Er on the microstructure and properties of Al-Zn-Mg-Cu-Zr alloys during heat treatments[J].Materials Science and Engineering A,2020,792:139807.
• [42] Sun J R,Dong B X,Yang H Y,et al.The role of lithium in the aging precipitation process of Al-Zn-Mg-Cu alloys and its effect on the properties[J].Materials,2023,16(13):4750.
• [43] Guo K,Liang S,Wen S,et al.GPB-Ⅱ zone in Si microalloyed Al-Zn-Mg-Cu alloy and its strengthening effect[J].Materials Science and Engineering A,2022,852:143721.
• [44] 杜勋贵.挤压工艺对Al-Zn-Mg系合金组织性能的影响[D].沈阳：沈阳工业大学，2019.DU Xun-gui.Effect of extrusion technology on microstructure and properties of Al-Zn-Mg alloy[D].Shenyang:Shenyang Agricultural University,2019.
• [45] 邓运来，王亚风，林化强，等.挤压温度对Al-Zn-Mg合金力学性能的影响[J].材料研究学报，2016,30(2):87-94.DENG Yun-lai,WANG Ya-feng,LIN Hua-qiang,et al.Effect of extrusion temperature on strength and fracture toughness of an Al-Zn-Mg alloy[J].Chinese Journal of Materials Research,2016,30(2):87-94.
• [46] 邢艳辉.挤压速度对Al-Zn-Mg-Cu高强铝合金显微组织与硬度的影响[J].热加工工艺，2021,50(21):88-90.XING Yan-hui.Effect of extrusion speed on microstructure and hardness of Al-Zn-Mg-Cu high strength aluminum alloy[J].Hot Working Technology,2021,50(21):88-90.
• [47] Chen G,Chen L,Zhao G,et al.Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization[J].Journal of Alloys and Compounds,2017,710:80-91.
• [48] Hebbar S,Kertsch L,Butz A.Optimizing heat treatment parameters for the W-temper forming of 7xxx series aluminum alloys[J].Metals,2020,10(10):1361.
• [49] 王少卿，于化顺，张振亚，等.粉末热挤压Al-Zn-Mg-Cu系合金的热处理工艺[J].材料热处理学报，2009,30(6):98-102.WANG Shao-qing,YU Hua-shun,ZHANG Zhen-ya,et al.Heat treatment process of Al-Zn-Mg-Cu alloy fabricated by powder hot extrusion technology[J].Transactions of Materials and Heat Treatment,2009,30(6):98-102.
• [50] Hutchinson C R,de Geuser F,Chen Y,et al.Quantitative measurements of dynamic precipitation during fatigue of an Al-Zn-Mg-(Cu) alloy using small-angle X-ray scattering[J].Acta Materialia,2014,74:96-109.
• [51] Marlaud T,Deschamps A,Bley F,et al.Evolution of precipitate microstructures during the retrogression and re-ageing heat treatment of an Al-Zn-Mg-Cu alloy[J].Acta Materialia,2010,58(14):4814-4826.
• [52] Guo W,Guo J,Wang J,et al.Evolution of precipitate microstructure during stress aging of an Al-Zn-Mg-Cu alloy[J].Materials Science and Engineering A,2015,634:167-175.
• [53] He H,Wu X,Sun C,et al.Grain structure and precipitate variations in 7003-T6 aluminum alloys associated with high strain rate deformation[J].Materials Science and Engineering A,2019,745:429-439.
• [54] Ma Z,Robson J D.Understanding the effect of deformation combined with heat treatment on age hardening of Al-Zn-Mg-Cu alloy AA7075[J].Materials Science and Engineering A,2023,878:145212.
• [55] Mishra S,Yadava M,Kulkarni K,et al.A modified taylor model for predicting yield strength anisotropy in age hardenable aluminium alloys[J].Materials Science and Engineering A,2017,699:217-228.
• [56] Peng X,Guo Q,Liang X,et al.Mechanical properties,corrosion behavior and microstructures of a non-isothermal ageing treated Al-Zn-Mg-Cu alloy[J].Materials Science and Engineering A,2017,688:146-154.
• [57] Sha G,Cerezo A.Early-stage precipitation in Al-Zn-Mg-Cu alloy (7050)[J].Acta Materialia,2004,52(15):4503-4516.
• [58] 夏朝峰，王良龙，陈思悦，等.Al-Zn-Mg-Cu合金时效析出相的研究[J].材料热处理学报，2011,32(S1):79-82.XIA Chao-feng,WANG Liang-long,CHEN Si-yue,et al.Research of precipitates in a Al-Zn-Mg-Cu alloy after aging[J].Transactions of Materials and Heat Treatment,2011,32(S1):79-82.
• [59] Cao F,Zheng J,Jiang Y,et al.Experimental and DFT characterization of η′ nano-phase and its interfaces in Al-Zn-Mg-Cu alloys[J].Acta Materialia,2019,164:207-219.
• [60] 杨林，陶欣慈，胡斌，等.轧制对Al-6Zn-2Mg-2Cu合金时效组织及MgZn2相析出动力学的影响[J].金属热处理，2017,42(1):44-48.YANG Lin,TAO Xin-ci,HU Bin,et al.Effect of rolling on aging microstructure of Al-6Zn-2Mg-2Cu alloy and precipitation kinetics of MgZn2 phase[J].Heat Treatment of Metals,2017,42(1):44-48.
• [61] 王东，马宗义.轧制工艺对7050铝合金显微组织和力学性能的影响[J].金属学报，2008,44(1):49-54.WANG Dong,MA Zong-yi.Effects of rolling process on microstructure and mechanical property of 7050 aluminum alloy[J].Acta Metallurgica Sinica,2008,44(1):49-54.
• [62] Mei L,Yang M J,Chen X P,et al.Precipitate evolution and properties of an Al-Zn-Mg-Cu alloy processed by thermomechanical treatment[J].Materials Science and Engineering A,2023,867:144716.
• [63] Yang Y,Li Y,Yi D,et al.Revealing the microstructure evolution mechanism and mechanical responses of a novel Al-Zn-Mg-Cu alloy by hot deformation process[J].Journal of Materials Research and Technology,2024,29:3699-3710.
• [64] Zhang S,Luo X,Zheng G Y,et al.Effect of cryorolling and ageing on the microstructure and mechanical properties of Al 7085 alloy[J].Materials Science and Engineering A,2022,832:142482.
• [65] Li H,Xu W,Wang Z,et al.Effects of re-ageing treatment on microstructure and tensile properties of solution treated and cold-rolled Al-Zu-Mg alloys[J].Materials Science and Engineering A,2016,650:254-263.
• [66] Nageswara rao P,Singh D,Jayaganthan R.Effect of post cryorolling treatments on microstructural and mechanical behaviour of ultrafine grained Al-Mg-Si alloy[J].Journal of Materials Science & Technology,2014,30(10):998-1005.
• [67] 韩宝帅，魏立军，徐严谨，等.预变形对超高强Al-Zn-Mg-Cu合金时效组织与力学性能的影响[J].金属学报，2020,56(7):1007-1014.HAN Bao-shuai,WEI Li-jun,XU Yan-jin,et al.Effect of pre-deformation on microstructure and mechanical properties of ultra-high strength Al-Zn-Mg-Cu alloy after ageing treatment[J].Acta Metallurgica Sinica,2020,56(7):1007-1014.
• [68] Cheon H S,Kim B J,Kim J,et al.Effect of prerolling before artificial aging on the mechanical properties of high-Zn-content Al-Zn-Mg-Cu-Sc-Zr-Mn alloy[J].Journal of Materials Research and Technology,2024,33:1249-1259.
• [69] Zhang D,Jiang H C,Cui Z J,et al.Precipitation kinetics in an Al-Zn-Mg alloy during stress-aging[J].Journal of Alloys and Compounds,2021,862:158680.
• [70] Yang W,Zhang Y,Yang H,et al.Effect of non-isothermal retrogression and re-aging treatment on microstructure evolution and mechanical properties of Al-Zn-Mg-Cu alloy[J].Journal of Materials Research and Technology,2024,31:1728-1743.
• [71] Valiev R Z,Islamgaliev R K,Alexandrov I V.Bulk nanostructured materials from severe plastic deformation[J].Progress in Materials Science,2000,45(2):103-189.
• [72] Duan Y,Tang L,Xu G,et al.Microstructure and mechanical properties of 7005 aluminum alloy processed by room temperature ECAP and subsequent annealing[J].Journal of Alloys and Compounds,2016,664:518-529.
• [73] Elhefnawey M,Shuai G L,Li Z,et al.On achieving superior strength for Al-Mg-Zn alloy adopting cold ECAP[J].Vacuum,2020,174:109191.
• [74] Xue K,Wang B,Yan S,et al.Strain-induced dissolution and precipitation of secondary phases and synergetic stengthening mechanisms of Al-Zn-Mg-Cu alloy during ECAP[J].Advanced Engineering Materials,2019,21(4):1801182.
• [75] Khelfa T,Muňoz-Bolaňos J A,Li F,et al.Microstructure and mechanical properties of AA6082-T6 by ECAP under warm processing[J].Metals and Materials International,2020,26(8):1247-1261.
• [76] Sha G,Wang Y B,Liao X Z,et al.Influence of equal-channel angular pressing on precipitation in an Al-Zn-Mg-Cu alloy[J].Acta Materialia,2009,57(10):3123-3132.
• [77] Ghosh A,Ghosh M,Gudimetla K,et al.Development of ultrafine grained Al-Zn-Mg-Cu alloy by equal channel angular pressing:Microstructure,texture and mechanical properties[J].Archives of Civil and Mechanical Engineering,2020,20(1):7.
• [78] Li J,Li F,Wang W,et al.Achieving grain refinement and related mechanical property improvement of an Al-Zn-Mg-Cu alloy through severe plastic deformation[J].Journal of Materials Engineering and Performance,2018,27(12):6690-6700.
• [79] Li G,Xu S,Wan T,et al.Effect of intermediate-temperature severe plastic deformation on microstructure evolution,mechanical properties and corrosion behavior of an Al-Zn-Mg-Cu alloy[J].Materials Characterization,2023,205:113248.
• [80] Sha G,Wang Y B,Liao X Z,et al.Microstructural evolution of Fe-rich particles in an Al-Zn-Mg-Cu alloy during equal-channel angular pressing[J].Materials Science and Engineering A,2010,527(18/19):4742-4749.
• [81] Wang W,Pan Q,Wang X,et al.Mechanical properties and microstructure evolution of ultra-high strength Al-Zn-Mg-Cu alloy processed by room temperature ECAP with post aging[J].Materials Science and Engineering A,2018,731:195-208.
• [82] Xu X,Li C,Wang S,et al.Microstructural evolution and mechanical properties of Al-Zn-Mg-Cu alloy processed by integrated extrusion and equal channel angular pressing (iECAP) and heat treatment[J].Materials Research Express,2019,6(8):0865b8.
• [83] Zhang Y,Jin S,Trimby P W,et al.Dynamic precipitation,segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion[J].Acta Materialia,2019,162:19-32.
• [84] Zhang Y,Jin S,Trimby P,et al.Strengthening mechanisms in an ultrafine-grained Al-Zn-Mg-Cu alloy processed by high pressure torsion at different temperatures[J].Materials Science and Engineering A,2019,752:223-232.
• [85] Rao G N M,Kumar V R M.A review on recent advances in accumulative roll bonding of similar,dissimilar and metal matrix composites[J].Materials Today:Proceedings,2022,56:A13-A18.
• [86] Hidalgo P,Cepeda-Jiménez C M,Ruano O A,et al.Influence of the processing temperature on the microstructure,texture,and hardness of the 7075 aluminum alloy fabricated by accumulative roll bonding[J].Metallurgical and Materials Transactions A,2010,41(3):758-767.
• [87] Hidalgo-Manrique P,Orozco-Caballero A,Cepeda-Jiménez C M,et al.Influence of the accumulative roll bonding process severity on the microstructure and superplastic behaviour of 7075 al alloy[J].Journal of Materials Science & Technology,2016,32(8):774-782.
• [88] Ebrahimi S H S,Dehghani K,Aghazadeh J,et al.Investigation on microstructure and mechanical properties of Al/Al-Zn-Mg-Cu laminated composite fabricated by accumulative roll bonding (ARB) process[J].Materials Science and Engineering A,2018,718:311-320.

文章评论(Comment)：