李小军,项燕龙,向朝建,巢国辉,于翔宇,龚深,娄花芬,李周

• 1:中南大学材料科学与工程学院
• 2:中铝科学技术研究院有限公司
• 3:宁波金田铜业(集团)股份有限公司
• 4:中南大学粉末冶金国家重点实验室

摘要(Abstract)：

Cu-Fe合金充分发挥了铜和铁元素的优势，具有良好的强度、导电性和电磁屏蔽性能，广泛应用于电力、电子通讯、建筑和海洋船舶等领域。然而，Cu-Fe合金在熔炼时存在的亚稳液相分离问题，阻碍了其大规模应用。面对日益增长的对高强高导兼具电磁屏蔽性能合金的应用需求，必须对合金的制备方法、成分筛选和加工工艺进行更深入地研究。本文从Cu-Fe合金的制备方法、合金化元素对合金相结构的调控以及加工工艺对合金性能的影响等方面入手，对目前Cu-Fe合金的发展现状进行了总结。最后分析了目前Cu-Fe合金发展存在的挑战，并展望了其未来的研究方向。

关键词(KeyWords)： Cu-Fe合金;制备方法;相结构调控;研究进展

Abstract:

Keywords:

基金项目(Foundation): 国家重点研发计划(2021YFB3501003);; 国家自然科学基金(92366202,52271125)

作者(Author): 李小军,项燕龙,向朝建,巢国辉,于翔宇,龚深,娄花芬,李周

DOI: 10.13289/j.issn.1009-6264.2024-0276

参考文献(References)：

• [1] Ma M Z,Xiao Z,Meng X P,et al.Effects of trace calcium and strontium on microstructure and properties of Cu-Cr alloys[J].Journal of Materials Science & Technology,2022,112:11-23.
• [2] Yu X Y,Ren J W,Gu K H,et al.Synergistic improvement of mechanical properties and electrical conductivity of Cu-Fe alloys by rare earth metals Sc and Y addition[J].Journal of Alloys and Compounds,2024,979:173569.
• [3] Xia Z R,Liu W Z,Li Y C,et al.Effect of G-phase and heterogeneous deformation-induced strengthening on the mechanical properties of Cu-20Ni-20Mn-2Fe-1Si alloy[J].Materials Characterization,2023,205:113325.
• [4] Cai H Y,Lv W Q,Pan E D,et al.Synergistic effects of trace silicon,calcium and cerium on the microstructure and properties of a novel Cu-Cr-Nb-Si-Ca-Ce alloy[J].Materials Science and Engineering A,2024,898:146419.
• [5] Tian Y Z,Yang Y,Peng S Y,et al.Managing mechanical and electrical properties of nanostructured Cu-Fe composite by aging treatment[J].Materials Characterization,2023,196:112600.
• [6] Ding Y J,Wang X,Xiao Z,et al.Effect of cryogenic rolling and intermediate aging on mechanical reinforcement of the Cu-Fe-Nb composites[J].Materials Characterization,2024,207:113469.
• [7] Wang Y J,Qu J P,Wang X L,et al.Effects of Y addition on the microstructure,properties and softening resistance of Cu-Cr alloy[J].Journal of Alloys and Compounds,2022,902:163816.
• [8] Borodin E N,Morozova A,Bratov V,et al.Experimental and numerical analyses of microstructure evolution of Cu-Cr-Zr alloys during severe plastic deformation[J].Materials Characterization,2019,156:109849.
• [9] Wang W,Kang H J,Chen Z N,et al.Effects of Cr and Zr additions on microstructure and properties of Cu-Ni-Si alloys[J].Materials Science and Engineering A,2016,673:378-390.
• [10] Jia Y L,Pang Y,Yi J,et al.Effects of pre-aging on microstructure and properties of Cu-Ni-Si alloys[J].Journal of Alloys and Compounds,2023,942:169033.
• [11] Song B X,Yu T B,Jiang X Y,et al.Effect of W content on the microstructure and properties of Cu-Fe alloy[J].Journal of Materials Research and Technology,2020,9(3):6464-6474.
• [12] Wang M,Yang Q R,Jiang Y B,et al.Effects of Fe content on microstructure and properties of Cu-Fe alloy[J].Transactions of Nonferrous Metals Society of China,2021,31(10):3039-3049.
• [13] 庞永杰.电磁屏蔽用Cu-Fe-Si合金组织及性能研究[D].长沙：中南大学，2024.PANG Yong-jie.Microstructure and properties of Cu-Fe-Si alloy for electromagnetic shielding[D].Changsha:Central South University,2024.
• [14] 李周，肖柱，姜雁斌，等.高强导电铜合金的成分设计、相变与制备[J].中国有色金属学报，2019,29(9):2009-2049.LI Zhou,XIAO Zhu,JIANG Yan-bin,et al.Composition design,phase transition and fabrication of copper alloys with high strength and electrical conductivity[J].The Chinese Journal of Nonferrous Metal,2019,29(9):2009-2049.
• [15] 赵志方，孙伟.高强度高导电铜合金的强化机制[J].热加工工艺，2017,46(6):27-30.ZHAO Zhi-fang,SUN Wei.Strengthening mechanism of high strength and high conductivity copper alloy[J].Hot Working Technology,2017,46(6):27-30.
• [16] 张文芹.引线框架用铜带产品现状及研发进展[J].有色金属加工，2015,44(5):5-8.ZHANG Wen-qin.Review of status and development progress of copper strip products for lead frame[J].Nonferrous Metals Processing,2015,44(5):5-8.
• [17] 姜业欣，娄花芬，解浩峰，等.先进铜合金材料发展现状与展望[J].中国工程科学，2020,22(5):84-92.JIANG Ye-xin,LOU Hua-fen,XIE Hao-feng,et al.Development status and prospects of advanced copper alloy[J].Strategic Study of CAE,2020,22(5):84-92.
• [18] 尹素花，董中奇，付俊薇，等.机械合金化对微波烧结Cu20Fe80合金组织性能的影响[J].轴承，2017(12):21-25.YIN Su-hua,DONG Zhong-qi,FU Jun-wei,et al.Effect on mechanical alloying on structure and properties of microwave sintered alloy Cu20Fe80[J].Bearing,2017(12):21-25.
• [19] Bevk J,Harbison James P,Bell Joseph L.Anomalous increase in strength of in situ formed Cu-Nb multifilamentary composites[J].Journal of Applied Physics,1978,49(12):6031-6038.
• [20] 胡号，李雷，许磊，等.Cu-Fe合金制备技术研究进展[J].粉末冶金技术，2019,37(6):468-474.HU Hao,LI Lei,XU Lei,et al.Research progress on the preparation technology of Cu-Fe alloy[J].Powder Metallurgy Technology,2019,37(6):468-474.
• [21] Wu Z W,Chen Y,Meng L,et al.Effect of Fe content on the microstructure and mechanical and electrical properties of Cu-Fe in situ composites[J].Journal of Materials Engineering and Performance,2021,30(8):5939-5946.
• [22] 毕莉明，刘平，陈小红，等.变形方式对Cu-8.3Fe-1Ag形变原位复合材料组织性能的影响[J].材料热处理学报，2012,33(3):28-34.BI Li-ming,LIU Ping,CHEN Xiao-hong,et al.Effect of deformation ways on microstructure and properties of deformation-processed Cu-8.3Fe-1Ag in-situ composites[J].Transactions of Materials and Heat Treatment,2012,33(3):28-34.
• [23] Zhang L,Guo X,Li Z Y,et al.Effect of alloying elements on the microstructure and performance of Cu-6 pctAg in-situ composites[J].Metallurgical and Materials Transactions A,2020,51(12):6727-6739.
• [24] 陈小红，刘平，田保红，等.微合金化对Cu-15Cr原位复合材料组织和性能的影响[J].材料热处理学报，2009,30(2):44-48.CHEN Xiao-hong,LIU Ping,TIAN Bao-hong,et al.Effects of micro-alloying on microstructure and mechanical properties of Cu-15Cr in-situ composites[J].Transactions of Materials and Heat Treatment,2009,30(2):44-48.
• [25] 张俊超，刘平，田保红，等.形变原位铜基复合材料的研究进展[J].材料导报，2006(8):80-83.ZHANG Jun-chao,LIU Ping,TIAN Bao-hong,et al.Review on deformation processed Cu-based in-situ composite[J].Materials Review,2006(8):80-83.
• [26] Zou J,Lu D P,Fu Q F,et al.Microstructure and properties of Cu-Fe deformation processed in-situ composite[J].Vacuum,2019,167:54-58.
• [27] 韩宗恩，王旭峰，李运刚，等.Cu-Fe合金的制备及性能研究现状[J].铸造技术，2023,44(9):849-854.HAN Zong-en,WANG Xu-feng,LI Yun-gang,et al.Research status of preparation and properties of Cu-Fe alloy[J].Foundry Technology,2023,44(9):849-854.
• [28] 曹敏敏.快速冷却条件下铜铁合金的凝固组织及性能研究[D].重庆：重庆理工大学，2013.CAO Min-min.Research on the solidification microstructure and properties of the Cu-Fe alloy in the rapid cooling condition[D].Chongqing:Chongqing University of Technology,2013.
• [29] Guo M X,Wang F,Yi L.The microstructure controlling and deformation behaviors of Cu-Fe-C alloy prepared by rapid solidification[J].Materials Science and Engineering A,2016,657:197-209.
• [30] Li Y P,Xiao Z,Li Z,et al.Microstructure and properties of a novel Cu-Mg-Ca alloy with high strength and high electrical conductivity[J].Journal of Alloys and Compounds,2017,723:1162-1170.
• [31] 董琦祎，汪明朴，贾延琳，等.磷含量对Cu-Fe-P合金组织与性能的影响[J].材料热处理学报，2013,34(6):75-79.DONG Qi-yi,WANG Ming-pu,JIA Yan-lin,et al.Effect of P content on microstructure and property of Cu-Fe-P alloys[J].Transactions of Materials and Heat Treatment,2013,34(6):75-79.
• [32] Zhang C Z,Chen C G,Ma R T,et al.Simultaneous enhancement of the mechanical and electrical properties of Cu20Fe alloys by introducing phosphorus[J].Materials Characterization,2024,209:113711.
• [33] Yang H Y,Bu Y Q,Wu J M,et al.High strength,high conductivity and good softening resistance Cu-Fe-Ti alloy[J].Journal of Alloys and Compounds,2022,925:166595.
• [34] Tang S K,Xiao Z,Ding Y J,et al.Precipitation behavior and mechanical properties of a novel Cu-2Fe-0.5Ti alloy produced by thermos-mechanical treatment[J].Materials Science and Engineering A,2023,882:145453.
• [35] Liu Q,Zhang X C,Wang Q,et al.Microstructure evolution of Ti5Si3 in Cu-Ti-Si alloys[J].China Foundry,2020,17(4):286-292.
• [36] 廖万能.引线框架用高性能Cu-Ni-Si合金带材短流程制备工艺与组织性能研究[D].北京：北京科技大学，2021.LIAO Wan-neng.Research on short preparation process,microstructure and properties of high performance Cu-Ni-Si alloy strip for lead frame[D].Beijing:University of Science and Technology Beijing,2021.
• [37] Pang Y J,Chao G H,Luan T Y,et al.Microstructure and properties of high strength,high conductivity and magnetic Cu-10Fe-0.4Si alloy[J].Materials Science and Engineering A,2021,826:142012.
• [38] Lv X X,Cao N,He L J,et al.Effects of Si addition on mechanical,electrical and magnetic property of Cu-10Fe alloy[J].Materials Characterization,2023,196:112612.
• [39] Yu X Y,Zhang Y L,Zhang Y X,et al.Effect of dual-scale FeCrSi phase on the strength and conductivity of Cu-2.5Fe-0.3Cr-0.2Si alloy[J].Materials Science and Engineering A,2022,861:144340.
• [40] Ding Y J,Deng Z X,Xiao Z,et al.Effect of Nb content on mechanical reinforcement of the Cu-10Fe composites[J].Journal of Alloys and Compounds,2023,966:171540.
• [41] Zhang P,Lei Q,Yuan X B,et al.Microstructure and mechanical properties of a Cu-Fe-Nb alloy with a high product of the strength times the elongation[J].Materials Today Communications,2020,25:101353.
• [42] Ren L,Zhang S R,Shi J Q,et al.Grain refinement and mechanical properties enhancement of Cu-10 wt%Fe alloys via Zr addition[J].Materials Science and Engineering A,2022,846:143309.
• [43] Guo J Q,Yang H,Liu P,et al.Effect of Zr on thermal stability of Cu-Fe in situ composite[J].Advanced Materials Research,2011,150-151:1462-1465.
• [44] Yuan D W,Zeng H,Xiao X P,et al.Effect of Mg addition on Fe phase morphology,distribution and aging kinetics of Cu-6.5Fe alloy[J].Materials Science and Engineering A,2021,812:141064.
• [45] Gao H Y,Wang J,Shu D,et al.Effect of Ag on the microstructure and properties of Cu-Fe in situ composites[J].Scripta Materialia,2005,53(10):1105-1109.
• [46] Yue S P,Qu J P,Li G L,et al.A comprehensive investigation of carbon micro-alloying on microstructure evolution and properties of metastable immiscible Cu-Fe alloy[J].Journal of Alloys and Compounds,2022,921:166163.
• [47] Liu S C,Xu S S,Jie J C,et al.Microstructure evolution and magnetic properties of metastable immiscible Cu-Fe alloy with micro-alloying B element[J].Journal of Alloys and Compounds,2021,888:161627.
• [48] Lu D P,Wang J,Zeng W J,et al.Study on high-strength and high-conductivity Cu-Fe-P alloys[J].Materials Science and Engineering A,2006,421(1):254-259.
• [49] Luo X,Zeng H,Yuan D W,et al.Effect of the rare earth element Ce on the microstructure,properties and thermal stability of Cu5Fe alloy[J].Materials Today Communications,2023,36:106824.
• [50] Xie Z X,Gao H Y,Wang J,et al.Effect of homogenization treatment on microstructure and properties for Cu-Fe-Ag in situ composites[J].Materials Science and Engineering A,2011,529:388-392.
• [51] Wu Z W,Liu J J,Chen Y,et al.Microstructure,mechanical properties and electrical conductivity of Cu-12wt.% Fe microcomposite annealed at different temperatures[J].Journal of Alloys and Compounds,2009,467(1):213-218.
• [52] Wang M,Jiang Y B,Li Z,et al.Microstructure evolution and deformation behaviour of Cu-10 wt%Fe alloy during cold rolling[J].Materials Science and Engineering A,2021,801:140379.
• [53] Yang F,Dong L M,Zhou L C,et al.Excellent strength and electrical conductivity achieved by optimizing the dual-phase structure in Cu-Fe wires[J].Materials Science and Engineering A,2022,849:143484.
• [54] Yu X Y,Song Y F,Wang C C,et al.Effect of Mg content on the microstructure and properties of high strength,high conductivity Cu-Fe-Cr-Si-Mg alloy[J].Materials Science and Engineering A,2023,883:145510.
• [55] Qiu W T,Zheng L Y,Wang Q R,et al.Microstructure evolution and mechanical properties of high strength and high conductivity CuFe alloy wire prepared by cold drawing[J].Materials Characterization,2024,210:113781.

文章评论(Comment)：