王伟,严伟,单以银,杨柯,商宁波,赵立君

• 1:广东电网公司电力科学研究院
• 2:中国科学院金属研究所

摘要(Abstract)：

研究了热处理工艺和添加Cu元素对高速列车用51CrV4弹簧钢力学性能的影响。结果表明,实验用钢的相变点随着升温速度的增加而提高;随着回火温度的升高,实验用钢的硬度和强度均下降,伸长率、面缩率和冲击值略有增加;钢中加入0.15%～0.20%的Cu元素有利于提高钢的硬度,减弱了回火温度变化对强度的影响;实验用钢在460～500℃范围回火时,其力学性能均满足EN13298∶2003标准要求。

关键词(KeyWords)： 高速列车;51CrV4弹簧钢;添加Cu;力学性能

Abstract:

Keywords:

基金项目(Foundation): 国家“十一五”科技支撑计划(2009BAG12A07-D02);; 辽宁省科技攻关项目(2008221003)

作者(Author): 王伟,严伟,单以银,杨柯,商宁波,赵立君

DOI: 10.13289/j.issn.1009-6264.2010.11.007

参考文献(References)：

• [1]杨才福,苏航,惠卫军,等.高速列车用车轮钢、轴承钢和弹簧钢的发展[J].机车电传动,2003(增刊):32-36.YANG Cai-fu,SU Hang,HUI Wei-jun,et al.Development of wheel steel,bearing wheel and spring steel for high speed train[J].Electric Drive for Locomotives,2003(Supplement):32-36.
• [2]高惠菊.提速铁路车辆用高性能优质合金弹簧钢的研究与开发[D].北京科技大学,2004.GAO Hui-ju.Study of high performance alloy spring steels for accelerated railway wagons[D].University of Science and Technology Beijing,2004.
• [3]徐德祥,尹钟大.高强度弹簧钢的发展现状和趋势[J].钢铁,2004,39(1):67-71.XU De-xiang,YIN Zhong-da.The tendency to high strength of spring steels and the effect of alloying elements[J].Iron&Steel,2004,39(1):67-71.
• [4]Hot-rolled steels for quenched and tempered springs-Technical delivery conditions[S].EN10089∶2002.
• [5]薛正良,李正邦,张家雯.不同生产工艺对高强度弹簧钢夹杂物尺寸分布及疲劳性能的影响[J].钢铁,2002,37(1):22-25.XUE Zheng-liang,LI Zheng-bang,ZHANG Jia-wen.Effect of different processes on inclusion size distribution and fatigue property of high strength spring steel[J].Iron&Steel,2002,37(1):22-25.
• [6]苏德达.常用弹簧钢奥氏体晶粒长大倾向的比较[J].金属制品,2003,29(6):35-37.SU De-da.Comparison of austenitic grain growth tendency of common spring steels[J].Steel Wire Products,2003,29(6):35-37.
• [7]Railway applications-Suspension components-Helical suspension springs,steel[S].EN13298∶2003.
• [8]Sano N,Maehara Y.Initial stage of Cu precipitation in Cu-added ultra-low carbon steel[J].Nippon Kinzoku Gakkaishi,1996,60(3):261-268.
• [9]Takahashi A,Iino M.Microstructural refinement by Cu addition and its effect on strengthening and toughening of sour service line pipe steels[J].ISIJ International,1996,36(2):241-245.

文章评论(Comment)：