郑东升,朱伏先,李艳梅,张明亚

• 1:东北大学轧制技术及连轧自动化国家重点实验室

摘要(Abstract)：

通过热轧试验研究了轧后空冷弛豫时间对铌微合金化热轧TRIP中厚板组织和力学性能的影响,结合光学显微镜、扫描电镜、透射电镜及XRD分析了弛豫过程各组成相的尺寸、含量变化以及铁素体基体上的位错组态和微合金碳氮化物的析出行为。结果表明,采用820℃终轧并弛豫80～120 s后超快冷的工艺可以得到含有铁素体、贝氏体和残留奥氏体的多相组织,弛豫时间显著影响铁素体晶粒尺寸、铁素体量以及铁素体基体上的位错密度和沉淀析出量。随着弛豫时间的延长,试验钢的屈服强度和抗拉强度呈降低趋势。空冷弛豫80 s时,试验钢的抗拉强度、伸长率和强塑积分别达到820 MPa,37.5%和30750 MPa.%的最大值。

关键词(KeyWords)： 铌微合金钢;热轧TRIP钢;弛豫;显微组织;力学性能

Abstract:

Keywords:

基金项目(Foundation): 国家“十一五”科技支撑计划项目(2006BAE03A08)

作者(Author): 郑东升,朱伏先,李艳梅,张明亚

DOI: 10.13289/j.issn.1009-6264.2011.03.016

参考文献(References)：

• [1]中信微合金化技术中心,编译.铌.科学与技术[M].北京:冶金工业出版社,2003:456.
• [2]Koh-Ichi Sugimoto,Toshiki Muramatsu,Shun-Ichi Hashimoto,et al.Formability of Nb bearing ultra high-strength TRIP-aided sheet steels[J].Journal of Materials Processing Technology,2006,177(1-3):390-395.
• [3]Monideepa Mukherjee,Omkar Nath Mohanty,Shun-ichi Hashimoto,et al.Strain-induced transformation behavior of retained austenite and tensileproperties of TRIP-aided steels with different matrix microstructure[J].ISIJ International,2006,46(2):316-324.
• [4]Yasuharu Sakuma,Osamu Matsumura,Hiroshi Takechi.Mechanical properties and retained austenite in intercritically heat-treated bainite-transformed steel and their variation with Si and Mn additions[J].Metallurgical and Materials Transactions A,1991,22(2):489-498.
• [5]Seung Chul Balk,Seongju Kim,Young Sool Jin,et al.Effects of alloying elements on mechanical properties and phase transformation of cold rolledTRIP steel sheets[J].ISIJ International,2001,41(3):290-297.
• [6]Suh Dong-Woo,Park Seong-Jun,Oh Chang-Seok.Influence of partial replacement of Si by Al on the change of phase fraction during heat treatmentof TRIP steels[J].Scripta Materialia,2007,57(12):1097-1100.
• [7]Lee Chang Gil,Kim Sung-Joon,Oh Chang-Seok,et al.Effects of heat treatment and Si addition on the mechanical properties of 0.1 wt%C TRIP-aided cold-rolled steels[J].ISIJ International,2002,42(10):1162-1168.
• [8]Ichiro Tsukatani,Shun'ichi Hashimoto,Tsuyoshi Inoue.Effects of silicon and manganese addition on mechanical properties of high-strength hot-rolledsheet steel containing retained austenite[J].ISIJ International,1991,31(9):992-1000.
• [9]Kim Sung-joon,Lee Chang Gil,Lee Tae-ho,et al.Effects of coiling temperature on microstructure and mechanical properties of high-strength hot-rolled steel plates containing Cu,Cr and Ni[J].ISIJ International,2000,40(7):692-698.
• [10]Di Wu,Zhuang Li.Effect of thermomechanical controlled processing on the microstructure and mechanical properties of Fe-C-Mn-Si multiphase steels[J].ISIJ International,2006,46(7):1059-1066.
• [11]雍歧龙,马鸣图,吴宝榕.微合金钢—物理和力学冶金[M].北京:机械工业出版社,1989:415.
• [12]Radko Kaspar,Josef Siegfried Distl,Klaus-Joachim,et al.Change in austenite grain structure of microalloyed plate steels due to multiple hotdeformation[J].Steel Research,1998,57(6):271.

文章评论(Comment)：