彭开萍,牟雪萍,马玉声

• 1:福州大学材料科学与工程学院
• 2:福建省产品质量检验研究院
• 3:福建乾达重型机械有限公司

摘要(Abstract)：

对Cu-35Zn合金首先采用模压形变十道次后再进行30%冷轧,随后再进行不同温度的退火热处理,研究了经模压形变后冷轧的Cu-35Zn合金的热稳定性。结果表明:模压形变后冷轧可以细化Cu-35Zn合金的晶粒,并有效地提高其强度和硬度。经模压形变后冷轧的Cu-35Zn合金在200℃以下退火时,材料组织处于回复阶段;在220℃退火时,形成具有大角度晶界的亚晶;在300~400℃的温度范围内,完成再结晶及晶粒长大过程。

关键词(KeyWords)： 模压形变;冷轧;Cu-35Zn合金;热稳定性;再结晶

Abstract:

Keywords:

基金项目(Foundation): 福建省自然科学基金资助项目(2011J01290)

作者(Author): 彭开萍,牟雪萍,马玉声

DOI: 10.13289/j.issn.1009-6264.2014.07.006

参考文献(References)：

• [1]Shin D H,Park J J,Kim Y S,et al.Constrained groove pressing and its application to grain refinement of aluminum[J].Materials Science&Engineering A,2002,328(1-2):98-103.
• [2]Krishnaiah A,Uday Chakkingal,Venugopal P.Applicability of the groove pressing technique for grain refinement in commercial purity copper[J].Materials Science&Engineering A,2005,410-411(0):337-340.
• [3]Krishnaiah A,Uday C,Venugopal P.Production of ultrafine grain sizes in aluminum sheets by severe plastic deformation using the technique of groove pressing[J].Scripta Materialia,2005,52(12):1229-1233.
• [4]Peng K,Zhang Y,Shaw L L,et al.Microstructure dependence of a Cu-38Zn alloy on processing conditions of constrained groove pressing[J].Acta Materialia,2009,57(18):5543-5553.
• [5]Stolyarov V V,Zhu Y T,Lowe T C,et al.A two step SPD processing of ultrafine-grained titanium[J].Nanostructured Materials,1999,11(7):947-954.
• [6]Fan Z,Jiang H,Sun X,et al.Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure(grade 3)Ti processed by two-step severe plastic deformation[J].Materials Science and Engineering A,2009,527(1-2):45-51.
• [7]Wu L,Chen J,Du Z,et al.Microstructures of ultra-fine grained FeCoV alloys processed by ECAP plus cold rolling and their evolutions during tempering[J].Transactions of Nonferrous Metals Society of China,2010,20(4):602-606.
• [8]Azushima A,Aoki K,Asada Y,et al.High strengthening by combination process of shear deformation and rolling[C].Proceedings of 2002 Japanese Spring Conference on Technology of Plasticity,2002:309-310.
• [9]Stolyarov V V,Zhu Y T,Alexandrov I V,et al.Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling[J].Materials Science and Engineering A,2003,343(1-2):43-50.
• [10]Ivanisenko Y,Wunderlich R K,Valiev R Z,et al.Annealing behaviour of nanostructured carbon steel produced by severe plastic deformation[J].Scripta Materialia,2003,49(10):947-952.
• [11]Amouyal Y,Divinski S V,Klinger L,et al.Grain boundary diffusion and recrystallization in ultrafine grain copper produced by equal channel angular pressing[J].Acta Materialia,2008,56(19):5500-5513.
• [12]王庆娟,张平平,杜忠泽,等.等径弯曲通道变形制备超细晶铜的热稳定性[J].材料热处理学报,2012,33(8):105-109.WANG Qing-juan,ZHANG Ping-ping,DU Zhong-ze,et al.Thermal stability of ultra-fine grained copper processed by equal channel angular pressing[J].Transactions of Materials and Heat Treatment,2012,33(8):105-109.
• [13]Lee Y B,Shin D H,Park K T,et al.Effect of annealing temperature on microstructures and mechanical properties of a 5083 Al alloy deformed at cryogenic temperature[J].Scripta Materialia,2004,51(4):355-359.
• [14]Cizek J,Prochazka I,Smola B,et al.Microstructure and thermal stability of ultrafine grained Mg-based alloys prepared by high-pressure torsion[J].Materials Science and Engineering A,2007,462(1-2):121-126.
• [15]张萤,彭开萍,林雪慧.形变方式对模压形变H62黄铜组织的影响[J].材料热处理学报,2009,30(4):114-119.ZHANG Ying,PENG Kai-ping,LIN Xue-hui.Influence of groove pressing mode on microstructure of H62 brass after the groove pressing[J].Transactions of Materials and Heat Treatment,2009,30(4):114-119.
• [16]Khodabakhshi F,Kazeminezhad M,Kokabi A H.Constrained groove pressing of low carbon steel:nano-structure and mechanical properties[J].Materials Science and Engineering A,2010,527(16-17):4043-4049.
• [17]Shirdel A,Khajeh A,Moshksar M M.Experimental and finite element investigation of semi-constrained groove pressing process[J].Materials and Design,2010,31(2):946-950.
• [18]Yoon S C,Krishnaiah A,Chakkingal U,et al.Severe plastic deformation and strain localization in groove pressing[J].Computational Materials Science,2008,43(4):641-645.
• [19]Lee J W,Park J J.Numerical and experimental investigations of constrained groove pressing and rolling for grain refinement[J].Journal of Materials Processing Technology,2002,130-131:208-213.
• [20]Peng K,Mou X,Zeng J,et al.Equivalent strain,microstructure and hardness of H62 brass deformed by constrained groove pressing[J].Computational Materials Science,2011,50(4):1526-1532.

文章评论(Comment)：